Jump to content

Trimethylsilane

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Citation bot (talk | contribs) at 23:48, 5 October 2021 (Add: doi-access. | Use this bot. Report bugs. | Suggested by Headbomb | Linked from Wikipedia:WikiProject_Academic_Journals/Journals_cited_by_Wikipedia/Sandbox | #UCB_webform_linked 581/881). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Trimethylsilane
Names
Preferred IUPAC name
Trimethylsilane
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.012.366 Edit this at Wikidata
EC Number
  • 213-603-0
UNII
  • C[SiH](C)C
Properties
C3H10Si
Molar mass 74.198 g·mol−1
Density 0.638 g cm−3
Melting point −135.9 °C (−212.6 °F; 137.2 K)
Boiling point 6.7 °C (44.1 °F; 279.8 K)
Hazards
GHS labelling:
GHS02: FlammableGHS04: Compressed GasGHS07: Exclamation mark
Danger
H220, H224, H280, H315, H319, H335
P210, P233, P240, P241, P242, P243, P261, P264, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P370+P378, P377, P381, P403, P403+P233, P403+P235, P405, P410+P403, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g. propaneInstability 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
2
4
1
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Trimethylsilane is the organosilicon compound with the formula (CH3)3SiH. It is a trialkylsilane. The Si-H bond is reactive. It is less commonly used as a reagent than the related triethylsilane, which is a liquid at room temperature.

Trimethylsilane is used in the semiconductor industry as precursor to deposit dielectrics and barrier layers via plasma-enhanced chemical vapor deposition (PE-CVD).[1] It is also used a source gas to deposit TiSiCN hard coatings via plasma-enhanced magnetron sputtering (PEMS). It has also been used to deposit silicon carbide hard coatings via low-pressure chemical vapor deposition (LP-CVD) at relatively low temperatures under 1000 °C. It is an expensive gas but safer to use than silane (SiH4); and produces properties in the coatings that cannot be undertaken by multiple source gases containing silicon and carbon.

See also

References

  1. ^ Chen, Sheng-Wen; Wang, Yu-Sheng; Hu, Shao-Yu; Lee, Wen-Hsi; Chi, Chieh-Cheng; Wang, Ying-Lang (2012). "A Study of Trimethylsilane (3MS) and Tetramethylsilane (4MS) Based α-SiCN:H/α-SiCO:H Diffusion Barrier Films". Materials. 5 (3): 377–384. Bibcode:2012Mate....5..377C. doi:10.3390/ma5030377. PMC 5448926. PMID 28817052.


Stub icon

This article about an organic compound is a stub. You can help Wikipedia by expanding it.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Trimethylsilane&oldid=1048433251"