Jump to content

User:MarkoZhuk09/SLMRewrite

From Wikipedia, the free encyclopedia

Notes

[edit]
  • In commercial terms it appears that SLMs are used mainly to change phase and amplitude of light.
  • The overhead projector transparency as an SLM is not verified. Search?
  • Modern SLMs come mainly from LCD technology, particularly the twisted nematic crystal.
  • Theory of operation:
    • Light is either reflected or transmitted through. (So 2 types not the electrically addressed or optically addressed stuff).
    • TN LCD, length of cystals changes phase of light. If reflective need some mirrored coating like polished aluminium at back

Research to do:

[edit]
  • What types apart from TN crystal?
    • LCOS displays?
    • Parallel aligned displays - similar to LCD designs?
  • Applications:
    • Wavefront correction
    • Pulse shaping
    • Beam forming, steering
    • Optical testing
  • Try to find commercial applications as well as research.
  • Images needed:
    • TN display showing length of crystal affecting wavefronts
    • Schematics of reflective vs transmission based?


Draft

[edit]

A spatial light modulator (commonly abbreviated as SLM) is an optical device which imposes a form of spatially-varying modulation on a beam of light. An example of such a modulator is an overhead projector transparency, which filters and absorbs light to generate an image. In experimental physics, an SLM is most often used to manipulate either the intensity or phase of light as a means of control. Most modern SLMs are electronically controlled and are used in a wide variety of applications 'Examples'

Usually, an SLM modulates the intensity of the light beam, however it is also possible to produce devices that modulate the phase of the beam or both the intensity and the phase simultaneously. SLMs are used extensively in holographic data storage setups to encode information into a laser beam in exactly the same way as a transparency does for an overhead projector. They can also be used as part of a holographic display technology.

SLMs have been used as a component in optical computing.

There are several different ways to generate phase and amplitude modulation.


Electrically addressed Spatial Light Modulator (EASLM)

[edit]
An LCD-based reflection EASLM. The reflective surface is the functional area.

As its name implies, the image on an electrically addressed spatial light modulator is created and changed electronically, as in most electronic displays. EASLMs usually receive input via a conventional interface such as VGA or DVI input. They are commonly available at resolutions up to WUXGA (1920 × 1200). Unlike ordinary displays, they are usually much smaller (having an active area of about 2 cm²) as they are not normally meant to be viewed directly. An example of an EASLM is the Digital Micromirror Device at the heart of DLP displays or Electrically controlled birefringent LCoS Displays.

Optically addressed Spatial Light Modulator (OASLM)

[edit]

The image on an optically addressed spatial light modulator, also known as a light valve, is created and changed by shining light encoded with an image on its front or back surface. A photosensor allows the OASLM to sense the brightness of each pixel and replicate the image using liquid crystals. As long as the OASLM is powered, the image is retained even after the light is extinguished. An electrical signal is used to clear the whole OASLM at once.

They are often used as the second stage of a very-high-resolution display, such as one for a computer-generated holographic display. In a process called active tiling, images displayed on an EASLM are sequentially transferred to different parts an OASLM, before the whole image on the OASLM is presented to the viewer. As EASLMs can run as fast as 2500 frames per second, it is possible to tile around 100 copies of the image on the EASLM onto an OASLM while still displaying full-motion video on the OASLM. This potentially gives images with resolutions of above 100 megapixels.

Application in ultrafast pulse measuring and shaping

[edit]

Multiphoton Intrapulse Interference Phase Scan (MIIPS) is a technique based on the computer-controlled phase scan of spatial light modulator. Through the phase scan to an ultrashort pulse, MIIPS can not only characterize but also manipulate the ultrashort pulse to get the needed pulse shape at target spot (such as Transform-Limited pulse for optimized peak power, and other specific pulse shapes). This technique features with full calibration and control of the ultrashort pulse, with no moving parts, and simple optical setup.

See also Active filters in Femtosecond pulse shaping.

References

[edit]
  • Digital Light Processing for High-Brightness, High-Resolution Applications, Larry J. Hornbeck (TI), 21st century Archives [1]
  • Optically addressed spatial light modulators for replaying computer-generated holograms, Coomber, Stuart D.; Cameron, Colin D.; Hughes, Jonathon R.; Sheerin, David T.; Slinger, Christopher W.; Smith, Mark A.; Stanley, Maurice (QinetiQ), Proc. SPIE Vol. 4457, p. 9-19 (2001)
  • Liquid Crystal Optically Addressed Spatial Light Modulator, [2]
  • Computer-Generated Holography as a Generic Display Technology, Slinger, C.; Cameron, C.; Stanley, M.; IEEE Computer, Volume 38, Issue 8, Aug. 2005, pp 46-53, [3]