Zirconium(IV) silicate
| Names | |
|---|---|
| Preferred IUPAC name
Zirconium(IV) silicate | |
| Systematic IUPAC name
Zirconium(4+) silicate | |
| Other names
Zircon
Zirconium(4+) orthosilicate | |
| Identifiers | |
3D model (JSmol)
|
|
| ChemSpider | |
| ECHA InfoCard | 100.030.216 |
| EC Number |
|
| MeSH | Zircon |
PubChem CID
|
|
| UNII | |
CompTox Dashboard (EPA)
|
|
| |
| |
| Properties | |
| O4SiZr | |
| Molar mass | 183.305 g·mol−1 |
| Appearance | Colourless crystals |
| Density | 4.56 g cm−3 |
| Melting point | 2,550 °C (4,620 °F; 2,820 K) (decomposes) |
| Hazards | |
| NFPA 704 (fire diamond) | |
| Flash point | Non-flammable |
| Safety data sheet (SDS) | MSDS |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
| |
Zirconium silicate, also zirconium orthosilicate, (ZrSiO4) is a chemical compound, a silicate of zirconium. It occurs in nature as the zircon, a silicate mineral. Zirconium silicate is also sometimes known as zircon flour.
Zirconium silicate is usually colorless, but impurities induce various colorations. It is insoluble in water, acids, alkali and aqua regia. Hardness is 7.5 on the Mohs scale.[1]
Production
Zirconium silicate occurs in nature as mineral zircon. Ore is mined from natural deposits and concentrated by various techniques. It is separated from sand by electrostatic and electromagnetic methods.
Also, the compound can be made by fusion of SiO2 and ZrO2 in an arc furnace, or by reacting a zirconium salt with sodium silicate in an aqueous solution.
Uses
Zirconium silicate is used for manufacturing refractory materials for applications where resistance to corrosion by alkali materials is required. It is also used in production of some ceramics, enamels, and ceramic glazes. In enamels and glazes it serves as an opacifier. It can be also present in some cements. Another use of zirconium silicate is as beads for milling and grinding. Thin films of zirconium silicate and hafnium silicate produced by chemical vapor deposition, most often MOCVD, can be used as a high-k dielectric as a replacement for silicon dioxide in semiconductors.[2]
Zirconium silicates have also been studied for potential use in medical applications. For example, ZS-9 is a zirconium silicate that was designed specifically to trap potassium ions over other ions throughout the gastrointestinal tract.[3] It is undergoing clinical trials for the treatment of hyperkalemia.
Zirconium disillicate is used in some Dental Crowns because of its hardness and because it is chemically nonreactive.
Toxicity
Zirconium silicate is an abrasive irritant for skin and eyes. Chronic exposure to dust can cause pulmonary granulomas, skin inflammation, and skin granuloma.[4] However, there are no known adverse effects for normal, incidental ingestion.[5]
References
- ^ P. Patnaik (2002). Handbook of inorganic chemicals. McGraw-Hill Professional. p. 1002. ISBN 0-07-049439-8.
- ^ Lide, David R. (1998). Handbook of Chemistry and Physics (87 ed.). Boca Raton, FL: CRC Press. pp. 4–96. ISBN 0-8493-0594-2.
- ^ http://www.zspharma.com/ZS-9.html
- ^ "Zirconium silicate MSDS" (PDF). Archived from the original (PDF) on November 11, 2006. Retrieved 2009-06-06.
{{cite web}}: Unknown parameter|deadurl=ignored (|url-status=suggested) (help) - ^ http://www.agsco.com/MSDS/Zirconium%20Silicate.pdf
 | This inorganic compound–related article is a stub. You can help Wikipedia by expanding it. |