A-91

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Ansh666 (talk | contribs) at 17:58, 15 December 2015 (rm unsourced). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A-91
5.56×45mm NATO variant of the A-91
TypeBullpup Assault rifle
Place of originRussia
Service history
In service1990–present
Used byRussian Police, Military Services[citation needed]
Production history
DesignerKBP Instrument Design Bureau
Designed1990
ManufacturerKBP Instrument Design Bureau
Produced1991
Variants5,56 A-91
Specifications
Mass4.3 kg (9.48 lb) (A-91 with the grenade launcher)
4.4 kg (9.70 lb) (5,56A-91 with the grenade launcher)
Length660 mm (26.0 in)
670 mm (26.4 in) (5,56A-91)
Barrel length415 mm (16.3 in)
Width56 mm (2.2 in)
64 mm (2.5 in) (5,56А-91)
Height291 mm (11.5 in)
292 mm (11.5 in) (5,56A-91)

Cartridge5.45×39mm
5.56×45mm NATO (5,56A-91)
VOG-25 (grenade launcher)
Caliber5.45×39mm, 5.56×45mm NATO
ActionGas-operated, rotating bolt
Rate of fire600–800 rounds/min
700 rounds/min (5,56A-91)
Muzzle velocity715 (А-91), 910 (5,56А-91)
Effective firing range300 m
300 m (5,56A-91)
400 m (grenade launcher)
Feed system30-round detachable box magazine
SightsDioptric sight, Grenade launcher sight

The A-91 bullpup assault rifle (also known as A-91M) was developed during the 1990s by KBP (Instrument Design Bureau) in Tula, as an offspring of the A-91 family of compact assault rifles described in the 9A-91 article. While the A-91 retains the basic gas-operated, rotating bolt action and a trigger unit design from 9A-91, it features a bullpup polymer housing, with an integral 40 mm single-shot grenade launcher mounted under the barrel. The earliest prototypes of the A-91 bullpup were fitted with the grenade launcher above the barrel, and with a front vertical foregrip; current models are fitted with the underbarrel launcher, which also serves as a forearm. The A-91 features a forward ejection system, initially developed in Tula by designers like Afanasiev during the early 1960s. In this system, the ejection port is located above the pistol grip, and points forward. Extracted cases are fed from bolt head through the short ejection tube to the ejection port, and fall out of the gun well clear of the shooter's face, even when firing from the left shoulder. As for now, the A-91 is made in small number and, probably, is used by some elite law enforcement units in Russia; it is also offered for export and domestic military and police sales.

Gallery

See also

External links