Coastal erosion

Many stretches of theghahaha lol this is hilarious Anglia

, England coastline are prone to heavy levels of erosion, such as this collapsed section of cliffs at Hunstanton, Norfolk.]]

Coastal erosion is the wearing away of land or the removal of beach or dune sediments by wave action, tidal currents, wave currents, or drainage (see also beach evolution). Waves, generated by storms, wind, or fast moving motor craft, cause coastal erosion, which may take the form of long-term losses of sediment and rocks, or merely the temporary redistribution of coastal sediments; erosion in one location may result in accretion nearby. The study of erosion and sediment redistribution is called 'coastal morphodynamics'. It may be caused by hydraulic action, abrasion, and corrosion.

On rocky coasts, coastal erosion results in dramatic rock formations in areas where the coastline contains rock layers or fracture zones with varying resistance to erosion. Softer areas become eroded much faster than harder ones, which typically result in landforms such as tunnels, bridges, columns, and pillars.

Dunwich, the capital of the English medieval wool trade, disappeared over the period of a few centuries due to redistribution of sediment by waves. Human interference can also increase coastal erosion: Hallsands in Devon, England, was a coastal village that washed away overnight, an event possibly exacerbated by dredging of shingle in the bay in front of it.

The California coast, which has soft cliffs of sedimentary rock and is heavily populated, regularly has incidents of housing damage as cliffs erode. Damage in Pacifica is shown at left. Devil's Slide, Santa Barbara and Malibu are regularly affected.

The Holderness coastline on the east coast of England, just north of the Humber Estuary, is the fastest eroding coastline in Europe due to its soft clay cliffs and powerful waves. Groynes and other artificial measures to keep it under control has only accelerated the process further down the coast, because longshore drift starves the beaches of sand, leaving them more exposed.

Wave action

Hydraulic action

Hydraulic action occurs when waves striking a cliff face compress air in cracks on the cliff face. This exerts pressure on the surrounding rock, and can progressively splinter and remove pieces. Over time, the cracks can grow, sometimes forming a cave. The splinters fall to the sea bed where they are subjected to further wave action.

Attrition

Attrition occurs when waves causes loose pieces of rock debris (scree) to collide with each other, grinding and chipping each other, progressively becoming smaller, smoother and rounder. Scree also collides with the base of the cliff face, chipping small pieces of rock from the cliff or have a corrasion (abrasion) effect, similar to sandpapering.

Corrasion

Corrasion (abrasion) occurs when waves break on cliff faces and slowly erode it. As the sea pounds cliff faces it also uses the scree from other wave actions to batter and break off pieces of rock from higher up the cliff face which can be used for this same wave action and attrition.

Corrosion

Corrosion or solution/chemical weathering occurs when the sea's pH (anything below pH 7.0) corrodes rocks on a cliff face. Limestone cliff faces, which have a high pH, are particularly affected in this way. Wave action also increases the rate of reaction by removing the reacted material.

Factors that influence erosion rates

Primary factors

The ability of waves to cause erosion of the cliff face depends many factors.

The hardness or ‘erodibility’ of sea-facing rocks is controlled by the rock strength and the presence of fissures, fractures, and beds of non-cohesive materials such as silt and fine sand.

The rate at which cliff fall debris is removed from the foreshore depends on the power of the waves crossing the beach. This energy must reach a critical level to remove material from the debris lobe. Debris lobes can be very persistent and can take many years to completely disappear.

Beaches dissipate wave energy on the foreshore and provide a measure of protection to the adjoining land.

The stability of the foreshore, or its resistance to lowering. Once stable, the foreshore should widen and become more effective at dissipating the wave energy, so that fewer and less powerful waves reach beyond it. The provision of updrift material coming onto the foreshore beneath the cliff helps ensure a stable beach.

The adjacent bathymetry controls the wave energy arriving at the coast, and can have an important influence on the rate of cliff erosion.

• Coastal Erosion
• 
  Pacifica, California coast after major storms in 1997 destroyed the houses shown above.
• 
  Beach erosion at Cabrillo National Monument, California.
• 
  Large-scale coastal erosion at Torrey Pines State Reserve, California.
• 
  Coastal erosion at Torrey Pines State Reserve, California, resulted in the necessary relocation of a scenic overlook.

Secondary factors

• Weathering and transport slope processes
• Slope hydrology
• Vegetation
• Cliff foot erosion
• Cliff foot sediment accumulation
• Resistance of cliff foot sediment to attrition and transport

Tertiary factors

• Resource extraction
• Coastal management

See also

• Beach nourishment
• Bioerosion
• Blowhole
• Coastal and Estuarine Research Federation (CERF)
• Coastal and oceanic landforms
• Coastal management
• Erosion
• Modern recession of beaches
• Natural arch
• Submersion

External links

• Sustainable coastal erosion management in Europe
• Coastal Erosion Information from the Coastal Ocean Institute, Woods Hole Oceanographic Institution
• Environment Agency guide to coastal erosion
• Wave Erosion
• Time-lapse movie of beach erosion in Australia
• Examine an example of wave erosion
• Erosion & Flooding in the Parish of Easington
• Some interesting teaching resources
• Examples of coastal landforms
• US Economic Costs of Coastal Erosion & Inundation NOAA Economics

Images:

• Work to reduce coastal erosion at Lyme Regis in Dorset 2006
• Images of Coastal features