Jump to content

SC radar

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Sturmvogel 66 (talk | contribs) at 12:25, 11 November 2022 (References). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

SC (radar)
SC-1 aboard USS Long Island
Country of originUnited States
ManufacturerGeneral Electric
Introduced1942
TypeAir/Surface-search radar
FrequencyVHF band
PRF60 Hz
Beamwidth10–25°
Pulsewidth4–5 μs
Range48–120 km (30–75 mi)
Precision90–180 m (98–197 yd)
Power220 kW

SC was an American-made air and surface-search radar used during World War II by the United States Navy. Variations include SC-1, SC-2 and SC-3.[1]

Overview

They were a longwave search sets, installed on destroyers and larger ships to search for planes and surface vessels and for control of interception. All sets have an "A" scope, provision for Identification friend or foe (IFF) connections, and work with a gyro-compass repeater. SC-2 and SC-3 also have PPI scopes, remote PPI's, and built-in BL and BI*antennas.[2]

With antennas at 100', SC and SC-1 (without preamplifier) have a reliable maximum range of 30 miles on medium bombers at 1,000' altitude. With preamplifier, SC-1's range is extended to 75 miles – the same as that of SC-2 and SC-3. Range accuracy of SC is ± 200 yards; later models have an accuracy of ± 100 yds. bearing accuracy of SC and SC-21 is ± 5°; of SC-2 and SC-3, ± 3°. There is no elevation control on any of the sets, but height can be estimated roughly from positions of minimum signal strength.[2]

Shipment includes spares for each set. If separate generator is needed, it is included in shipment. Not air transportable.

Both SC and SC-1 have 5 components weighing a total of 1800 lbs. SC-2 has 6 components weighing a total of 3,000 pounds. Weights and dimensions of antenna assemblies are 450 lbs. 6'111/2" x 8'6" for SC and SC-1; 478 lbs. 4'6" x 15' for SC-2 and SC-3. Antennas should be mounted as high as possible, preferably 100 feet or more, above other superstructures.[2]

One operator per shift is minimum on all 3 sets. SC and SC-1 require primary power of 1500 watts at 115 volts, 60 cycles. SC-2 and SC-3 require 2500 watts at 115 volts, 60 cycles. All sets use ship's power of 115 volts, 60 cycles; transformer, if ship's power is 440 volts AC or 220 volts AC; motor generator if ship's power is DC.[2]

Onboard ships

United States United States

Australia Australia

See also

Citations

  1. ^ Robert, Buderi (1998). The Invention That Changed the World: How a Small Group of Radar Pioneers Won the Second World War and Launched a Technical Revolution. Touchstone. ISBN 0-684-83529-0.
  2. ^ a b c d "US Radar: Operational Characteristics of Radar Classified by Tactical Application". Naval History and Heritage Command, US Navy. 1 August 1943. Retrieved 2022-02-18. Public Domain This article incorporates text from this source, which is in the public domain.

References