Jump to content

USS Abarenda (IX-131)

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Cydebot (talk | contribs) at 21:21, 10 October 2016 (Robot - Moving category Ships built in San Francisco, California‎ to Category:Ships built in San Francisco per CFD at Wikipedia:Categories for discussion/Log/2016 September 6.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

SS Acme when she was inspected by the Twelfth Naval District in December 1917.
SS Acme when she was inspected by the Twelfth Naval District in December 1917.
History
United States
NameAcme
NamesakeAcme Oil Company[1][2]
Owner
BuilderUnion Iron Works, San Francisco, California
Yard number125
Laid down1916
Launched29 April 1916
Commissioned22 June 1916
IdentificationOfficial number: 214173
Statusrequisitioned by the WSA 3 November 1943
SS Acme at anchor, 19 August 1943, location unknown. US National Archives, RG-19-LCM, Photo No. Unknown, a US Coast Guard photo now in the collections of the US National Achieves
SS Acme at anchor, 19 August 1943, location unknown, shortly before being acquired by the USN.
History
United States
NameAbarenda
Acquired26 February 1944
Commissioned18 April 1944
Decommissioned28 February 1946
Renamed3 November 1943
Stricken20 March 1946
Identification
Fatesold for scrapping, 29 January 1948
Statusscrapped at Shanghai 1948
General characteristics
Class and typeEmergency Fleet Corporation design 1047 tanker
TypeFloating storage tanker
Displacement19,410 long tons (19,720 t)
Length435 ft (133 m)
Beam56 ft (17 m)
Draft25 ft 6 in (7.77 m)
Installed power
Propulsion
Speed10.2 kn (18.9 km/h; 11.7 mph)
Complement10 officer 110 enlisted

The second USS Abarenda (IX-131) was a storage tanker, one of many miscellaneous-class Navy vessel manned by the United States Coast Guard during World War II.


Design and construction

Acme was an Emergency Fleet Corporation design 1047 tanker laid down by the Union Iron Works in San Francisco, in 1916, for the United States Shipping Board. She was launched 29 April 1916, and commissioned 22 June 1916.[2]

Acme was designed for transporting oil in bulk to Far Eastern ports that had been served by British ships before the outbreak of World War I. She, along with four more ships that were to follow her, had been designated "A" boats by the Marine Transportation Department.[2]

Service History

World War I

During World War I Acme filled in for British ship that had been commandeered by the British Admiralty. Her first voyage was to China. She would continue her San Francisco to China route for the next five years with only rare trips to New York for loads to Singapore via the Suez Canal. After the United States entered World War I, only Acme and two of her sister ships were available for Standard Transportation to use in the Pacific, this was mainly because on her return trips she would load coconut oil in the Philippines, which because of its 12 percent glycerin content made it a valuable war cargo.[2]

Post war service

Acme started running a route from the "Texas-oil-coast" to "ports-north-of-Hatteras" in 1925. She changed owners in 1931 and 1935, but she didn't change names.[2]

World War II

SS Acme under tow after being torpedoed in the stern on 17 March 1942 by U-124 off North Carolina. She was abandoned by her crew but was later towed by Navy and Coast Guard vessels to Lynnhaven Roads, VA., and then to Newport News for repairs.

Acme was sailing for Corpus Christi, Texas, from New York, on 17 March 1942, about 1 nmi (1.9 km; 1.2 mi) west of Diamond Shoal Light, North Carolina, (35°03′N 75°12′W / 35.05°N 75.20°W / 35.05; -75.20) when she was damaged by a torpedo from U-124. Eleven of her crew were killed with the surviving 20 abandoning ship. They were rescued by USCGC Dione (WPC-108) and landed at Norfolk, Virginia, with Acme being towed to Lynnhaven Roads, Virgina, and later to Newport News, Virginia, for repairs. The War Shipping Administration (WSA) requisitioned her about a month later while she was still in dock.[2]

After repairs Acme served in transatlantic convoys, with deliveries of fuel to Guantanamo Bay Naval Base, on occasion.[2]

In September 1943, the WSA obtained full title to Acme when they traded six obsolete tankers for three new tankers.[2]

In anticipation of her acquisition by the Navy, Acme was renamed Abarenda on 3 November 1943 and simultaneously classified IX-131. She was purchased by the Navy on 26 February 1944 and commissioned on 18 April 1944, Lieutenant commander Benjamin F. Langland, USCGR, in command.[3]

Abarenda was assigned to Service Squadron 10 as a floating storage tanker. She served at Manus Island in the Admiralty Islands until 20 February 1945 when she headed for the Philippines. The tanker arrived at Leyte on 13 March and, for the remainder of the War, dispensed fuel to the warships of the 3d/5th Fleet.[3]

Post war and decommissioning

Following the end of World War II, Abarenda fueled the ships supporting the occupation forces in the Far East and continued that duty until 28 February 1946 at which time she was decommissioned in the Philippines. Returned to the WSA that day, she was berthed with that organization's reserve fleet at Subic Bay. Her name was struck from the Navy list on 20 March 1946 and she resumed the name Acme while in the WSA reserve fleet.[3]

Sold on 29 January 1948 to the Asia Development Corp., Shanghai, China, along with 15 other vessels, for scrapping, she was delivered to her purchaser on 3 March 1948.[3]

See also

Notes

References

Books
  • Tarbell, Ida M. (1904). THE HISTORY OF THE STANDARD OIL COMPANY. New York: McClure, Phillips & C0. Retrieved 4 October 2016. {{cite book}}: Invalid |ref=harv (help)
Online sources