Wikipedia:Articles for creation/2007-12-12

Biological and Chemical Warfare

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. The Basics of Chemical and Biological Weapons Like a nuclear bomb, a chemical or biological weapon is a weapon of mass destruction. An effective attack using a chemical or biological agent can easily kill thousands of peoplein a matter of minutes. Chemical Weapons A chemical weapon is any weapon that uses a manufactured chemical to kill people. The first chemical weapon used effectively in battle was chlorine gas, which burns and destroys lung tissue. Chlorine is not an exotic chemical. Most municipal water systems use it today to kill bacteria. It is easy to manufacture from common table salt. In World War I, the German army released tons of the gas to create a cloud that the men would inhale then die. Modern chemical weapons tend to focus on agents with much greater killing power, meaning that it takes a lot less of the chemical to kill the same number of people. Many of them use the sorts of chemicals found in insecticides. When you spray your lawn or garden with a chemical to control aphids, you are, in essence, waging a chemical war on aphids. Many of us tend to imagine a chemical weapon as a bomb or missile that releases highly toxic chemicals over a city. (For example, the movie "The Rock" featured a scenario in which terrorists tried to launch a missile loaded with the chemical VX, a nerve toxin.) But in 1995, the group Aum Shinrikyo released sarin gas, a nerve gas, in the Tokyo subway. Thousands were wounded and 12 people were killed. No giant bombs or missiles were involved -- the terrorists used small exploding cannisters to release the gas in the subway. Biological Weapons A biological weapon uses a bacteria or virus, or in some cases toxins that come directly from bacteria, to kill people. If you were to dump a load of manure or human waste into a town's water supply, that would be a simple form or biological warfare -- human and animal manure contain bacteria that are deadly in a variety of ways. In the 19th century, American Indians were infected with smallpox through donated blankets. A modern biological weapon would use a strain of bacteria or a virus that would kill thousands of people, Such as poisoning the water supply. Tom Clancy has explored the idea of biological terrorism in two books: "Executive Orders" and "Rainbow Six." In both books, the source of infection is the Ebola virus. the infection is spread through small aerosol cans (like those used by insecticide products to create "bug bombs") released at conventions, or through misting systems used to cool sports venues. Sources http://science.howstuffworks.com/biochem-war2.htm 64.170.24.156 (talk) 00:36, 12 December 2007 (UTC) Declined. This article already exists in Wikipedia. See Chemical warfare and Biological warfare. Ariel♥Gold 00:40, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Flint Trollentino

This request for creation has been declined. Please do not modify it.
This is an archived discussion. Please do not modify it.

Grupo Fantasia

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. This request for creation has been declined. Please do not modify it. This is an archived discussion. Please do not modify it. Declined. We cannot accept unsourced suggestions or sources that are not reliable per the verifiability policy. Please provide reputable, third-party sources with your suggestions. Third party sources are needed both to establish the verifiability of the submission as well as its notability. Ariel♥Gold 01:34, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Cockle Creek

This request for creation has been declined. Please do not modify it.
This is an archived discussion. Please do not modify it.

Janice Wing

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Janice Wing has served 10 years on Niagara Falls City Council. She has two daughters: Guen Wheeler-Wing and Shonagh Colclough. Sources http://www.janicewing.com/ http://www.city.niagarafalls.on.ca/city_hall/council/current_council_members.asp 24.36.55.191 (talk) 01:23, 12 December 2007 (UTC) Declined. This suggestion doesn't sufficiently explain the importance or significance of the subject. See the speedy deletion criteria A7 and/or guidelines on biographies. Please provide more information on why the person or group is worthy of inclusion in an encyclopedia, and cite reliable, published third-party sources, so that the information in the article is verifiable. Thank you. Ariel♥Gold 01:31, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Child development

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Copyright violation from http://www.population.health.wa.gov.au/Child/resources/FNL%20Child%20Dev%203-4%20years.pdf removed. Sources www.google.com www.childhooddevelopment.com Mark Lemuel R. Magno UPHSD Declined. We cannot accept copyrighted content taken from web sites or printed sources. Note that copyright protection is granted to all works automatically, whether it is asserted or not. Unless stated otherwise, assume that most content on the internet is copyrighted and not suitable for Wikipedia. Please write in your own words, and in continuous prose. Additionally, Child development exists. Ariel♥Gold 05:22, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Said Shirian

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Said Shirian was born on September 1st, 1946 in Tehran, Iran. He was a Civil Engineer for NYNEX and developed the first ever patent in company history. The patent is titled "Duct for Cable". It consists of a duct for carrying cable comprising a tubular member having a barrel portion and a larger diameter bell portion, the duct further comprising a member disposed in the barrel portion for segmenting the barrel portion into compartments, the segmenting member have a first section and a second section, the second section extending into the bell portion and being adapted to inter fit with the first section. The patent was filed on October 23, 1984. Background of the Invention BACKGROUND OF THE INVENTION This invention relates to ducts for housing cable and, in particular, to ducts for housing communication cable. In the placing of conventional copper telephone cable, the cable is run through a duct which is used to house and protect the cable. Prior to placing the cable in the duct a cone shaped element is passed through the duct to clear away any debris and ensure a clear passage for the cable. Also attached to the cone is an end of a cable pull-line. Once the cone and attached end of the pull-line are through the duct, the other end of the line is affixed to a telephone cable and the cable pulled through the duct. In order to pass the cone through the duct, a pressure differential is created in the duct. This requires that the individual components of the duct and their interconnections provide an air-tight passage. Otherwise, air leaks will occur and insufficient pressure will be developed to pull the cone through the line. As the telephone industry has turned to the use of fiber optic cable for telephone transmission, it has had to develop techniques for placing the smaller diameter fiber optic cable. These techniques have continued to utilize the pressurized cone procedure for pulling cable through the ducts, since this procedure results in minimizing installation time. At present, placing of fiber optic cable is accomplished by first pulling three one inch inner ducts through the usual four inch copper cable duct. The pressurized cone procedure is then used to pull a fiber optic cable through a first duct and to pull a small copper cable through a second duct. The copper cable is needed to provide talking channels between various installation points. The third inner duct serves as a spare, since it cannot be used without an associated cable for talking channels. In many cases, the pulling of the three one inch ducts through the four inch duct is extremely difficult and in certain cases not possible to accomplish. This is particularly true where the four inch duct has vertical and horizontal bends. These bends may be created when placing the duct and may be a result of cable congestion and/or location. In order to provide for an additional fiber optic cable in a conventional four inch duct and to avoid the material and labor costs of providing and pulling three inner ducts, it has now been proposed that the four inch duct itself be modified by segmenting the duct into four one inch compartments, two of which for receiving fiber optic cable and the other two of which for receiving associated talking channel copper cable. While such a segmented duct would increase the cable capacity by one and would not require separate inner ducts, the duct must also be designed so that pulling of each cable through its associated compartment can be achieved utilizing the aforementioned pressurized cone procedure. This requires that the individual compartments be air-tight and that the duct be connectible to like ducts in a manner to preserve this condition. It would also be desirable if such a segmented duct could be further designed so that connection to similar ducts automatically aligns corresponding compartments. Finally, it would be advantageous if the duct could be made in long lengths, while still being capable of being cut to shorter lengths which when joined to similar ducts preserves the alignment as well as air-tightness of the corresponding compartments. It is therefore an object of the present invention to provide a cable duct having one or more of the above-mentioned features. It is a further object of the present invention to provide a segmented duct for fiber optic cable wherein the duct can be joined to similar ducts, while maintaining an air-tight condition for the individual compartments of the ducts. It is yet a further object of the present invention to provide a duct of the last mentioned type which can be of long length and which can be cut into shorter lengths which can then be joined to similar ducts so as to maintain alignment of corresponding compartments and an air-tight condition. SUMMARY OF THE INVENTION In accordance with the principles of the present invention, the above and other objects are realized in a duct comprising a tubular member having a barrel portion and a bell portion, the latter bell portion having a diameter which is greater than that of the barrel portion, and means disposed in the barrel portion for segmenting the barrel portion into compartments. The segmenting means is itself comprised of a first section and a second section, the second section extending into the bell portion and having an end adapted to interfit with the first section. In this manner, if the barrel portion of a first duct constructed in accordance with the invention is inserted into the bell portion of a second duct also constructed in accordance with the invention, the first section of the segmenting means of the first duct will interfit with the end of the second section of the segmenting means of the second duct. As a result, the ducts will be connected in a positive manner which tends to maintain the air-tight nature of the compartments at the connection point. In further accord with the invention, the barrel portion and bell portion of the tubular member of the invention are provided with mating first and second alignment means. These alignment means are situated such that the interfitting of the first and second sections of first and second ducts is realized in a manner which automatically aligns corresponding compartments of the ducts once the alignment means are brought into mating relationship. By use of the alignment means in combination with the segmenting means and its interfitting first and second sections, connection of like ducts is thus realized in a way which automatically preserves compartment alignment and air-tightness. In the embodiment of the invention to be disclosed hereinafter, the segmenting means comprises one or more pairs of spaced first walls which together form the first section. The second section comprises a single second wall for each pair of first spaced walls. Each single second wall has a thickness which is less than the spacing between its corresponding pair of spaced first walls so as to be able to tightly fit therebetween. The alignment means, on the other hand, comprises diametrically opposing flanges disposed on the barrel portion outer surface and an aligned slot in the bell portion for each such flange. Accordingly, when the flanges of the barrel portion of a first duct are inserted into the slots in the bell portion of a second duct, the second walls in the bell of the second duct will interfit between the corresponding spaced first walls in the barrel of the first duct to provide an interfitting tongue and groove like connection. BRIEF DESCRIPTION OF THE DRAWINGS The above and other features and aspects of the present invention will become more apparent upon reading the following detailed description, in conjunction with the accompanying drawings, in which: FIG. 1 shows a duct in accordance with the principles of the present invention; FIG. 2 shows a cross section of the duct of FIG. 1 taken across the line 2--2; FIG. 3 shows a cross section of the duct of FIG. 1 taken along the line 3--3; FIG. 4 shows the second section of the segmenting means of the duct of FIG. 1 which is utilized to connect the duct to other like ducts; and FIG. 5 shows a cross section similar to that of FIG. 2 of a modified version of the duct of FIG. 1. DETAILED DESCRIPTION In FIG. 1, the duct 1 is a duct made in accordance with the principles of the present invention. The duct 1 is in the form of a tubular member and comprises a cylindrical barrel portion 2 and a cylindrical bell portion 3. The barrel portion is of length l 1 and has inner and outer diameters D 1 and D 2 . The bell portion 3 is of shorter length l 2 but of larger inner and outer diamter D 3 and D 4 then the barrel portion. The bell portion serves to receive the barrel portion of a like duct when these ducts are to be interconnected. In accordance with the principles of the present invention, a segmenting means 4 is disposed within the barrel section 2. The segmenting means 4 includes a first section 4a which extends through the barrel portion 2 and which comprises a central element 4a 1 , and one or more pairs of first spaced walls, 4a 2 -4a 5 . Each pair of spaced walls comprises like first walls 4a 6 having a radially uniform spacing s over their entire lengths. The walls 4a 6 are flat and extend radially from the element 4a 1 to the inner wall 2a of the barrel portion 2. They further extend axially over substantially the entire length of the barrel portion. They, therefore, divide the barrel portion into four separate and air-tight compartments 5, 6, 7 and 8, each suitable for receiving its own telephone cable. At the end 2b of the barrel 2 the segmenting means includes a second section 4b. This section is formed by bringing the pairs of walls 4a 2 -4a 5 together to form a set of single second walls 4b 2 -4b 5 . As shown in FIG. 4, which, for simplicity, illustrates only the first pair of walls 4a 4 and their corresponding second wall 4b 4 , the second walls 4b 2 -4b 5 extend into the bell for a distance x beyond the point of termination of the element 4a 1 . Furthermore, as shown in FIG. 3, these walls are spaced from the inner surface 3a of the bell by a distance y equal to one-half the difference between the inner diameter D 1 and the inner diameter D 3 of the barrel and bell portions 2 and 3, respectively. In accordance with the invention, the end of the second section 4b of the segmenting means is adapted to interfit with the first section of the segmenting means. This is accomplished in the present case by selecting the thickness t of each of the single walls 4b 2 -4b 5 to be less than the spacing s between the corresponding pairs of walls 4a 2 -4a 5 . Preferably, this difference is such that each pair of walls 4a 2 -4a 5 can be inserted over their corresponding wall 4b 2 -4b 5 in a tightly-engaging force-fitting manner. In addition to the segmenting means 4, the barrel and bell portions 2 and 3 of the duct 1 are provided with cooperating alignment means. In particular, the barrel 2 supports on its outer surface 2c flanges 9a and 9b. These flanges are diametrically opposite and extend over the length of the barrel and in parallel with the opposing pairs of walls and 4a 2 and 4a 4 . The bell 3, in turn, is provided with corresponding slots 11a and 11b in its wall. These slots run from the terminating point of the associated flange 9a and 9b to the end of the bell. As can be appreciated, by utilizing the above-described configuration of the duct 1 for two or more ducts, these ducts can now be connected end-to-end such that corresponding compartments 5, 6, 7 and 8 of the ducts align and remain air-tight. In particular, by inserting the barrel portion of a first duct having the configuration of the duct 1 into the bell portion of a second duct also having this configuration, the spaced walls 4a 2 -4a 5 of the first duct align with and tightly fit over the walls 4b 2 -4b 5 of the second duct. This tongue and groove type fit, moreover, exists over the distance x (see FIG. 4) and, thus, provides a distance of approximately 2x over which air must now travel before it can leak into another compartment. In actual practice, when two such ducts are to be joined, a cement material is applied to the barrel portion, including the pairs of walls 4a 2 -4a 5 , of the first duct and to the bell portion, including the walls 4b 2 -4b 5 , of the second duct. The ducts are then joined as aforementioned, resulting in cemented connections over the tongue and groove interfit of walls 4b 2 -4b 5 and spaced walls 4a 2 -4a 5 . Because each of the connections is now over a distance 2x, the likelihood of leakage of air from one duct compartment to the next is greatly decreased, since it is highly unlikely that there would be a failure of the cement to adhere at all points over the entire 2x distance. Accordingly, an improved air-tight connection with automatic alignment is realized utilizing the configuration of the duct 1 of the invention. It is also advantageous in accord with the invention to provide the barrel 2 of the duct 1 with a uniform cross section over its entire length l 1 . By this measure, the duct 1 can be cut anywhere along its length and it will still have spaced walls 4a 2 -4a 5 at its cut end which will tightly fit the walls 4b 2 -4b 5 of another like duct. The shorter length duct can, thus, now be readily joined to another like duct in the manner described above to obtain a composite duct having aligned air-tight compartments. FIG. 5 shows a cross-section similar to that of FIG. 2 of a duct like the duct of FIG. 2, except for a modification of the section 4a of the segmenting means 4. In particular, in FIG. 5, the section 4a has been modified by eliminating the element 4a 1 . As a result, each wall 4a 6 of the pairs of walls 4a 2 -4a 5 intersects with a further wall 4a 6 of another pair of walls in L-shaped configuration. In practice of the invention, the bell and barrel portions and the segmenting means of the duct may be formed from an integral member comprised of polyvinyl chloride (PVC), fiberglass or similar types of materials. The pairs of walls 4a 2 -4a 5 of the segmented means, in turn, might typically have a thickness of 0.045 inches and a spacing of 0.10 inches. The walls 4b 2 -4b 5 in such case would have a thickness of approximately 0.09 inches. The lengths l 1 and l 2 might also be 20' and 3", respectively while the dimension x might be 0.5 inches. Finally, the cement used to join like ducts might be comprised of a solvent and plastic material. Conventional cements of this type are manufactured and sold by various manufacturers. As above-indicated, the duct of the invention can be made in long lengths of approximately 20' or longer. As a result, the duct can undergo vertical and horizontal bending, thereby allowing for flexibility in connection. Furthermore, the supporting points provided by the walls 4a 6 give the duct increased structural strength. It, therefore, is more resistant to deformation resulting from external pressures. The duct of the invention provides significant cost advantages over the above-described prior procedure of utilizing three inner ducts in the conventional four inch duct. Firstly, material costs are reduced, since the need for three separate inner ducts is eliminated. Secondly, labor and operating costs are also reduced, since mobilization costs (opening and closing manholes, pumping water, testing for gas, etc.) are minimized and since placing and rodding of the three inner ducts is avoided. Finally, capital costs are reduced, since duct space is maximized and new construction can be avoided or at least delayed. It should be noted that while the duct of the invention has been described in terms of its use in housing fiber optic communication cable, the duct of the invention can also be used to house any other types of cable. In particular, the duct can advantageously be used to house cable having comparable dimensions as fiber optic cable. Additionally, the duct can be used to house cable intended for underground as well as above the ground placement. The duct can also serve as a riser duct in new commercial or residential buildings where the allocated space for ducts is very limited. In all cases, it is understood that the above-identified arrangement are merely illustrative of the many possible specific embodiments which represent applications of the present invention. Numerous and varied other arrangemnts can readily be devised in accordance with the principles of the present inventon without departing from the spirit and scope of the invention. Sources 216.165.11.84 (talk) 02:48, 12 December 2007 (UTC) Declined. We cannot accept blank suggestions. Please consider submitting to Wikipedia:Requested articles instead. --Hdt83 Chat 02:51, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

polish orliks

These pigeons were originally bred in the Polish/Ukrain mountains but fanciers eventually spread out throughout south-western Russia and the Ukraine. The first notable flight was put up in the southern Ukraine city of Nikloaev. Polish orliks flap their wings in a circular motion. Their wing tips should almost touch when descending to form a circle shape. Ukrainian sky-cutters are specially bred to fly straight up above their coop and to remain there (about a kilometer up) for several hours. A good sky-cutter has to be allowed at least a half an hour to an hour to reach these high altitudes, although some orliks are capable of reaching invisibility in only about six minutes. These birds become out of shape quite quickly so they should be flown almost every day if the weather permits. There are many different types of training, but the style most often used for laid back fanciers is to simply let a small group of hens or cocks out with a batch of younger birds (6-8 weeks old) and to fly them as you would a kit. The babies will try to follow the adults. After they have flown around a bit, call the hens in for feeding and the babies will follow them. There is also the option of tippler training with droppers.

Sources

Polish Orliks "Facinating orliks of the Ukraine" by K.D Spurling

Ukrainian Pigeons Skycutters www.ukrainianpigeons.com

142.179.123.232 (talk) 05:12, 12 December 2007 (UTC)

Micah Reed

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Micah Reed is from the streets of Ojai California. He is the biggest "charles" in all of the land. He currently resides at UCLA where he "charles" out on the regular. Sources http://www.ojaipost.com/sports/ 76.167.233.59 (talk) 06:42, 12 December 2007 (UTC) Declined. This suggestion doesn't sufficiently explain the importance or significance of the subject. See the speedy deletion criteria A7 and/or guidelines on biographies. Please provide more information on why the person or group is worthy of inclusion in an encyclopedia, and cite reliable, published third-party sources, so that the information in the article is verifiable. Thank you. Ariel♥Gold 06:49, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Sessilee Lopez

Supermodel Sessilee Lopez started modeling at the age of 13 in Port St. Lucie, Florida when she was selected by Vogue staff to walk in a runway show featuring Catherine Malandrino's clothing line at Hard Rock Live in Orlando. She was the youngest model in the show and it was the first time she ever wore Stilettos but she pulled it off and shortly after went to New York to be discovered. The next year at an open call Sessilee was discovered by IMG Models when agent Phil McGowen picked her to be one of only two models chosen that year at a weekly open call. By the time she was just 16, the New York Daily News, V Magazine, Newyorkmetro.com, Zink Magazine, Philadelphia Inquirer, and the New York Times magazine listed Sessilee as one of the up-and-coming models to watch.

Sessilee has since modeled for numerous magazines including Pop, W. Allure, Harper's Bazaar, Elle, Vibe, American Vogue, Italian Vogue, French Vogue, Japanese Vogue, Trace, Deutsch, V, Essence, Interview, Wade, WWD, Elle Accessories and New York Times Magazine and plenty of others. She has walked the runways for top designers including Fendi, Armani, Lagerfeld Galleries, Zac Posen, Jean Paul Gaultier, Peter Som and many more. She has been photographed by only the best photographers in the world which include Steven Meisel, Paolo Roversi, Alexi Hay, Karl Lagerfeld, Gilles Bensimon, Peter Lindberg, Mario Sorrenti, Michael Thompson, David Sims, Nicholas Moore, Mikeal Jansson, Patrick Demarcheller, Solve Sundsbo, Mario Testino and Alexi Lumbomirski.

Sessilee is currently represented by Major Models in Paris and has appeared in movies and television shows in the United States.

Sources

http://www.Sessilee.com

[1]

[2]

[3]

http://www.fashionmodeldirectory.com/models/Sessilee_Lopez

http://www.thefashionspot.com/forums/f52/sessilee-lopez-23296-19.html

http://supermodels.nl/sessileelopez

http://www.style.com/peopleparties/modelsearch/thumb/person2326

http://models.com/oftheminute/?p=498

[4]

http://nymag.com/fashion/fashionshows/05/spring/models/7.htm

http://forsurecouture.blogspot.com/2007/02/its-not-j-lo-its-s-lo.html

http://www.hintmag.com/mm/mm75.php

68.196.73.138 (talk) 06:51, 12 December 2007 (UTC)

Saleisha

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Sources 124.176.84.73 (talk) 06:55, 12 December 2007 (UTC) Declined. We cannot accept blank suggestions. Please consider submitting to Wikipedia:Requested articles instead. VivioFateFan (Talk, Sandbox) 07:04, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Morgan Kennedy

(born March 28, 1984) is a American model of multi-ethnic descent. She is recognized as being a successful in lingerie and swim wear advertising. Since her introduction in 2006, she has appeared in Maxim, UMM of Canada, and Savvy. Morgan is currently the face of Esperanza Clothing, BCS Labs and the Aussie rock band Overpass.

Height: 5 ft 7 in Weight 112 lbs Eye Color Blue Hair Color Blonde Dress Size 2 Shoe Size 7 Measurements 34-24-34

Sources

www.morgankennedy.net

http://www.maximonline.com/hotties/votingprofile.aspx?id=11666

http://www.savvy.com/savvy_girls/featured/morgan_kennedy_blonde_ambition

69.200.227.192 (talk) 07:02, 12 December 2007 (UTC)

Alexandre Owens

This request for creation has been declined. Please do not modify it.
This is an archived discussion. Please do not modify it.

Ikaw Lang ang Mamahalin

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Articles for creation/2007-12-12 Created by GMA Directed by Loui Ignacio Starring Angelika dela Cruz Country of origin Philippines No. of episodes 65+ Production Running time 30 minutes Original release Network GMA Release 2001 – 2002 Ikaw Lang ang Mamahalin'is a past soap opera or Philippines drama of GMA 7. It tells the story of a young lady who suffered from amnesia and was almoast left with nothing but soon she found out that she was the daughter of a rich businessman. It tells a story of how a young woman survived all the challenges in life including losing someone she loves and protecting her life against the people who like to take her position. Cast and Characters Starring Angelika dela Cruz as Mylene / Katherine / Carmencita With Albert Martinez as Ferdinand Dina Bonnevie as Martina Chanda Romero as Amara Luna Gina Alajar as Lilian Featuring James Blanco as Joseph Sunshine Dizon as Clarissa Cogie Domingo as Jepoy Richard Gutierrez as Iñigo Chynna Ortaleza as Melanie Sherwin Ordoñez as Charles Lj Reyes as Cassandra Gabby Eigenmann as Mark Also Starring Mark Anthony Fernandez as Gabriel Ian Veneracion Eddie Gutierrez Carmi Martin Charlie Davao Jennifer Sevilla Marjorie Barretto as Vanessa Janice Jurado as Mamu Anna Capri Russel Simon Mel Martinez Isabella De Leon Geneva Cruz Jaime Fabregas Maureen Mauricio Rez Cortez Tricia Roman Trivia Actress Angelika dela Cruz had her screen kiss on TV in this series with James Blanco. Angelika dela Cruz had three leading men in the series; James Blanco, Sherwin Ordoñez and Mark Anthony Fernandez. This is Richard Gutierrez' first drama series. This was one of the drama series who had a re-run in the sister company of GMA, QTV 11. Declined. We cannot accept unsourced suggestions or sources that are not reliable per the verifiability policy. Please provide reputable, third-party sources with your suggestions. Third party sources are needed both to establish the verifiability of the submission as well as its notability. ~Sasha Callahan (Talk) 17:15, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Theme Song

This request for creation has been declined. Please do not modify it.
This is an archived discussion. Please do not modify it.

Production Credits

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Louie Ignacio(Director) Sources http://www.imdb.com/title/tt0372071/ http://ricojr.wordpress.com/2007/11/20/angelika-dela-cruz-returns-to-the-kapuso-network/ 203.177.180.111 (talk) 09:50, 12 December 2007 (UTC) Declined. This article provides insufficient context for those unfamiliar with the subject matter. Please see tips on how to better format your article. VivioFateFan (Talk, Sandbox) 13:35, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Chocolate milk comes from choclate cows

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. The introduction of genetic modelling into farming has produced cows that can now produce chocolate milk. This is by introducing a chocolate gene taken from the cocoa bean in south America and introducing it into the milk glands in the cow. The British economy is expected to save millions from producing chocolate milk straight from the cow saving costs of importing the cocoa beans from around the world. Coco-pops and Mars are now thinking of introducing new chocolate milk drinks - organic. And are even considering lactose intolerant drinks. These new organic chocolate milk drinks are expected on the market for Christmas, although currently they are in the process of testing to review how the market reacts to chocolate milk coming straight from the cow. Sources 212.188.154.254 (talk) 10:51, 12 December 2007 (UTC) jo jo is teh ghreatest guy ever he is total pwnage and will kick all of your asses 68.45.141.158 (talk) 11:43, 12 December 2007 (UTC) Declined. Your article appears to be a joke. It might be a wonderful entry in Uncyclopedia, a wiki where jokes and parodies are highly encouraged. However, Wikipedia requires a stodgier, more factual tone in its articles, and your comedic efforts cannot be rewarded here. VivioFateFan (Talk, Sandbox) 13:35, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Terrell Carter

Terrell Carter(born August 14, 1977) is an American singer, actor, and songwriter. He is known to most by his appearances in many of Tyler Perry's Plays.

Biography

Terrell Carter born Damon Terrell Carter, learned he could sing at the the age of seven. He was discovered by Fred Hammond, while singing at the Winans' church in Detroit. From there his career basically took off. He's been in Madea's Class Reunion, Meet the Browns and the recent Tyler Perry play, What's done in the dark. He's also appeared in the play made move, Diary of a Mad Black woman.

Sources

http://www.Terrellmusic.com

http://www.channel4000.com/sh/entertainment/ontheset/entertainment-ontheset-20000118-222929.html

152.121.17.9 (talk) 14:14, 12 December 2007 (UTC)

Hazrat Shah Saqlain Miyan Huzoor Sharafati ul Qadri

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Hazrat Shah Saqlain Miyan Huzoor Sharafati ul Qadri is one of the most famous personality of Bareilly. Sources http://www.alsaqlain.com http://www.alsaqlain.net http://www.reference.com/search?q=barely 203.123.42.228 (talk) 14:35, 12 December 2007 (UTC) Declined. This suggestion doesn't sufficiently explain the importance or significance of the subject. See the speedy deletion criteria A7 and/or guidelines on biographies. Please provide more information on why the person or group is worthy of inclusion in an encyclopedia, and cite reliable, published third-party sources, so that the information in the article is verifiable. Thank you. Ariel♥Gold 15:14, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Diamond Girl (film)

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. This is a film based on the novel written by Diana Palmer. Plot A girl named Claire has been working for the playboy Denny for 4 years. She likes him but he doesn't even give her a second glance. Denny's brother Regan comes into town and Denny and Reagan are competitive with each other. So naturally when Regan wants to manipulate Denny so Denny doesn't accept an offer given to him he realises that he can't do it alone, so he seeks the help of Claire. Claire acts as Regans girlfriend and distracts Denny. A few twists and turns later and you'll be felt thinking "That was such a heartwarming film but it was so cheesy". The leading cast Regan --> Jonathon Cake Claire -->Joely Collins Denny --> Kevin Otto Regan + Denny's mother (MRs Montana) --> Dyan Cannon Links http://www.imdb.com/title/tt0139984/ -- IMDB is not a reliable source. Ariel♥Gold http://www.imavision.com/en/eStore%2CwciCatalogue%2CType-P%2CID-2179%2CLoadCat-1.html -- Sales sites are not reliable sources Ariel♥Gold 80.193.38.187 (talk) 14:40, 12 December 2007 (UTC) Declined. We cannot accept unsourced suggestions or sources that are not reliable per the verifiability policy. Please provide reputable, third-party sources with your suggestions. Third party sources are needed both to establish the verifiability of the submission as well as its notability. ~Sasha Callahan (Talk) 17:14, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

StreetCred

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. StreetCred is a social media network for the hip-hop culture where members interact with each other and artists by listening/watching, posting, and sharing content of all media types, including blogs, photos, audio, and video. Launched in September 2007,the platform is a hybrid model of a social network similar to MySpace and FaceBook, as well as content publishing and sharing similar to Flickr and YouTube. It works on an advertising based business model, and is therefore free to use. The term street cred is defined as, acceptability or popularity especially among fashionable young urban people. Sources [5] [6] [7] 69.94.207.84 (talk) 15:00, 12 December 2007 (UTC) Declined. This suggestion doesn't sufficiently explain the importance or significance of the subject. See the speedy deletion criteria A7 and/or guidelines on web sites. Please provide more information on why the web site is worthy of inclusion in an encyclopedia. Thank you. ~Sasha Callahan (Talk) 17:14, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Pokemon Ranger 2

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Pokemon Ranger 2 is not a game. There is a rumor that there will be one. Sources 86.141.129.52 (talk) 15:09, 12 December 2007 (UTC) Declined. The proposed article is not suitable for Wikipedia. Wikipedia does not tell the future. Ariel♥Gold 15:15, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Michael Weidman

This request for creation has been declined. Please do not modify it.
This is an archived discussion. Please do not modify it.

Décollement

1. REDIRECTDecollement

Sources

The accented form is used in the Decollement article and Detachment (disambiguation). See http://www.google.com/search?q=D%C3%A9collement for examples of both forms.

71.41.210.146 (talk) 15:22, 12 December 2007 (UTC)

Cost Unit

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Cost unit as defined by CIMA is a "unit of product,service or time in relation to which cost may be ascertained or expressed". Cost units are the 'things', that the business is set up to provide of which cost is ascertained. For example, in a steel company, the cost per tonne of sugar may be ascertained, in a textile firm, cost per metre of cloth may be ascertained. Thus, a tonne or metre are cost units. Other types of cost units are kilogram, litre, dozen or gross, cubic foot, room per day, pair or a dozen pairs, etc. Sources Cost Accounting by Vikas Publishers 122.167.13.200 (talk) 15:29, 12 December 2007 (UTC) Declined. Wikipedia is an encyclopedia and not a dictionary. We cannot accept articles that are little more than definitions of words or abbreviations as entries. A good article should begin with a good definition, but expand on the subject. Please try creating an article at Wiktionary instead. ~Sasha Callahan (Talk) 17:13, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Gerry Brown

Gerry Brown was the creator and producer of the 1972-3 wWW2 drama 'The Pathfinders

Sources

http://www.imdb.com/title/tt0165053/ http://en.wikipedia.org/wiki/Pathfinders_%28TV_series%29 http://www.memorabletv.com/bfp1.htm

195.137.63.47 (talk) 15:54, 12 December 2007 (UTC)

Ashley Zych

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Sources 209.175.13.43 (talk) 16:30, 12 December 2007 (UTC) Declined. We cannot accept blank suggestions. Please consider submitting to Wikipedia:Requested articles instead. ~Sasha Callahan (Talk) 17:13, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Matt Morin, Milwaukee, WI

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Matt Morin is an amature mixed-martial artist and former wrestler from Milwaukee, WI. He trains at Adrian Serrano's Combat Sports gym located on the west side of Milwaukee. Personal Matthew Kevin Morin was born on May 5, 1980 in West Allis, Wisconsin. He wrestled for West Allis Central High School and earned his bachelor's degree at the University of Wisconsin-Madison. In addition, Matt is currently enrolled in seminary at North Park University to obtain his Masters in Divinity. Matt fights at 155 lbs. and his current record is 8-5. Recent Bouts On August 18, 2007 Matt earned the Konquer the Kage Interim Lightweight Title at 155 lbs. Matt defeated Ryan Stock (Team Crazy)at 1:49 in Round 1 by tapout (rear naked choke). On September 29, 2007 Matt earned the Lightweight Combat USA MMA -155 Title Matt defeated Peter Grimes (Miletich Fight Team Bettendorb IA USA)at 2:30 in Round 2 by tapout (guillotine choke) On November 10, 2007 in Dave Strassers Freestyle Combat Challenge 4 Matt defeated Justin Shipman at :31 in Round 2 by tapout (rear naked choke) Sources www.adrianserrano.com http://www.combatusafights.com/results/ http://fcfighter.brinkster.net/eventfights.asp?EventInstanceID=5128 http://www.sherdog.com/Fightfinder/fightfinder.asp?search=yes&EventID=5915 http://www.savage-entertainment.com/fighters.php http://www.nickagallar.net/ 67.52.245.125 (talk) 17:11, 12 December 2007 (UTC) Declined. This suggestion doesn't sufficiently explain the importance or significance of the subject. See the speedy deletion criteria (A7) and/or guidelines on notability. Please provide more information on why the subject is worthy of inclusion in an encyclopedia. Thank you. ~Sasha Callahan (Talk) 17:12, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Cranial Screwtop

This request for creation has been declined. Please do not modify it.
This request for creation has been reviewed. The reviewer comments appear below the article text. If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Having being reared in at a time 80’s cheese was force fed from all sides, but having inherited a religious devotion to Punk Rock, it was just inevitable that chaos would rain over our heroes' musical preferences. No-one could, or should, survive listening to The Damned and Joe Dolce in the same sitting, and the resulting bedlam of music brought Cranial Screwtop into existence. Formed in 2000 by Mark (Drums and Lead Vocals) Cranial Screwtop are an eclectic mix of individuals, every member having a very strong musical background, undertaking a variety of day jobs from Gigolo to Durex Stress Tester J, however all sharing the same vision and passion for covering 80’s Trash in a Punk Rock Style and doing it in the most enthusiastic and fun way possible. A number of years later and after lots of hard work gigging around Manchester, Sheffield and Liverpool playing numerous venues including Night and Day, Late Room, Hard Rock Café, Manchester Academy 3 and even the odd wedding, the band have gained a strong and loyal fan base from not only their energetic and humorous live shows, but also through their unexpected and original choice of songs. Their set includes covers of Duran Duran, A Flock of Seagulls and The Bangles to name but a few, it also includes covers borrowed from likeminded visionary bands such as China Drum (Wuthering Heights by Kate Bush), No FX (99 Red Balloons by Nena) & Toy Dolls (500 Miles by The Proclaimers). “The whole of their set is full of proven classics re-invented into punk rock delivered with all the attitude and energy that music genre demands”, “you could say that they rescue badly presented 80’s songs and release them back to the wild with their own original and imaginative arrangements” This truly is a covers band unlike any other. Although never initially intended, in 2007 the band produced their first full length album entitled “Too Fast For Technology” which was released in mid 2007. Not wanting to be accused of standing still, the band are currently working with a new vocalist Nichola to expand their live repertoire and are also experimenting with some original material so who knows what the future will hold? You may see them on the Eurovision Song Contest if only to follow in the footsteps of Buzz Fizz who must form the definition of 80’s Trash, whatever Cranial Screwtop decides to do in the future there is one guarantee they will always make, and live up to: “it will ROCK!!!” Band Members Mark Caban - Drums, Lead Vocals Simon Harrison - Bass, Backing Vocals, Kazoo Paul Loughrey - Guitar, Backing vocals, Kazoo Discography In 2007 Cranial Screwtop released their debut album Too Fast For Technology featuring the following tracks: 1. Planet Earth (Duran Duran Cover) 2. Down Under (Men At Work Cover) 3. Hazy Shade Of Winter (The Bangles Cover) 4. The Swords Of 1000 Men (Tenpole Tudor Cover) 5. Rio (Duran Duran Cover) 6. I Ran (So Far Away) ( A Flock Of Seagulls Cover) 7. Walk Like An Egyptian (The Bangles Cover) 8. Crash (The Primitives Cover) 9. Play That Funky Music White Boy (Wild Cherry Cover) 10. Psycho Killer (Talking Heads Cover) 11. Hungry Like The Wolf (Duran Duran Cover) Sources Cranial Screwtop Official Website Cranial Screwtop MySpace Page 194.106.59.122 (talk) 17:29, 12 December 2007 (UTC) Declined. This suggestion doesn't sufficiently explain the importance or significance of the subject. See the speedy deletion criteria (A7) and/or guidelines on notability. Please provide more information on why the subject is worthy of inclusion in an encyclopedia. Thank you. ~Sasha Callahan (Talk) 17:35, 12 December 2007 (UTC)
This is an archived discussion. Please do not modify it.

Campbell Works

Campbell Works is a non-profit organisation and the creative partnership between artists Neil Taylor and Harriet Murray. By initiating and developing collaborative frameworks and creating a platform for new curatorial projects, Campbell Works acts as a meeting point for ideas and aims to explore contextual relationships between art, spaces and people.

From the gallery and project rooms, Taylor and Murray have developed a succession of unique and extraordinary projects, installations and exhibitions, weaving a route through the commercial, experimental and public realms.

The building

Located in North London, the Campbell Works building used to be one of many warehouses comprising the Stoke Newington Brewery. In 1997 Taylor and Murray took it on and have since then been reordering its internal structure making it dynamic and functional. Campbell Works holds a gallery space, a multi-functional project room, artists' studios and the organisation's offices.

Projects

Recent projects include:

• Mind Mine
• On Trust
• The Pimp Car Project
• Streets for People

as well as a series of group and solo exhibitions of new and established artists, such as Shane Bradford, Shaun Doyle an Mally Mallinson. Accompanying events include talks by Richard Wentworth, screenings of movies such as Mondo Cane and live gigs by underground bands from London.

Publications

Works is an extension of the exhibition space in the form of a newspaper and is published by Campbell Works on the occasions of new projects to act as a wider discussion around their themes, thinking and visual language. It is the new parent for its surrogate offspring artinit.

Funding

Campbell Works has received financial support and funding from many organisations such as:

• The Wellcome Trust (or see the Wikipedia page)
• The Elephant Trust
• LIFT
• Awards for All
• Hackney Council

See also

• Campbell Works Official Website
• Artist run Centre

82.35.250.203 (talk) 17:46, 12 December 2007 (UTC)

Hotteh is Queer

Hotteh, a NetGamers IRC newbie has been announced to be gayest person on irc.

Paul Brickman

Paul Brickman is an American screenwriter and film director who was born on April 23, 1949 in Chicago, Illinois, USA.

He is best known for his directorial debut film Risky Business for which he also wrote the screenplay.

Brickman began his career as a camera assistant and story analyst. In 1990 he wrote and directed his follow up film Men Don't Leave starring Jessica Lange, an adaptation of the 1982 French film La Vie Continue.

Sources

• http://www.hollywood.com/celebrity/Paul_Brickman/190653
• http://www.answers.com/topic/paul-brickman?cat=entertainment
• http://www.rottentomatoes.com/celebrity/paul_brickman/
• Paul Brickman at IMDb

208.8.52.46 (talk) 17:52, 12 December 2007 (UTC)

Denial

"Articles for creation/2007-12-12"
Song
B-side	"TBA"

"Denial" is the twenty first single by the British girl group Sugababes, and the third to be taken from their fifth studio album Change.

The single was announced in early December by The Sun but was snubbed by fans who believed "My Love Is Pink" was the next single due to the fact that the song was sent to radios and was able to download. This is now however been denied by the record label saying that the promotional cds had only been sent out for clubs and dance radio stations only.

Digital Fine Contrast

Digital Fine Contrast is a contrast-enhancing display technology introduced in 2006 by LG. It is used in the company's "Flatron" line of TFT monitors and implements a 'smart function' whereby it dynamically detects the characteristics of each frame to be displayed and automatically adjusts its contrast to obtain a sharper and more vivid image. The system comprises three units: ACR(Auto Contents Recognition), DCE(Digital Contrast Enhancer) and DCM(Digital Contrast Mapper).

The initial announcement claimed monitors with DFC could achieve a contrast ratio of 1600:1, while later products have been presented as capable of ratios even as high as 5000:1.

Sources

86.123.7.202 (talk) 18:44, 12 December 2007 (UTC)

Kutavicius

Redirect to Bronius Kutavičius

Sources

Spelling without Lithuanian characters.

212.76.37.160 (talk) 18:47, 12 December 2007 (UTC)