Liquid hydrogen: Difference between revisions

Liquid hydrogen
Names
	IUPAC name Liquid Hydrogen
	Other names Hydrogen (cryogenic liquid); Hydrogen, refrigrated liquid; LH2, Para Hydrogen
Identifiers
CAS Number	1333-74-0 ;
3D model (JSmol)	Interactive image;
ChemSpider	762;
PubChem CID	783;
RTECS number	MW8900000;
UN number	1966
	InChI InChI=1/H2/h1H;
	SMILES [H][H];
Properties
Chemical formula	H2
Molar mass	2.016 g·mol−1
Appearance	Colorless Liquid
Density	4.23 lb./cu.ft = 67.8 kg·m-3
Melting point	−434.45 °F = −259.14 °C (14.01 K)
Boiling point	−423.17 °F = −252.87 °C (20.28 K)
Solubility in water	?
Hazards
NFPA 704 (fire diamond)	3 4 0
Flash point	?
Explosive limits	LEL 4.0 %; UEL 74.2 % (in air)
	Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). Infobox references

Browse history interactively

← Previous edit Next edit →

Content deleted Content added

VisualWikitext

Inline

Revision as of 20:17, 11 September 2009

Liquid hydrogen (LH2 or LH₂) is the liquid state of the element hydrogen. Hydrogen is found naturally in the molecular H₂ form.

To exist as a liquid, H₂ must be pressurized and cooled to a very low temperature, 20.28 K^[4] (−423.17 °F/−252.87°C).^[5] One common method of obtaining liquid hydrogen involves a compressor resembling a jet engine in both appearance and principle. Liquid hydrogen is typically used as a concentrated form of hydrogen storage. As in any gas, storing it as liquid takes less space than storing it as a gas at normal temperature and pressure. Once liquefied it can be maintained as a liquid in pressurized and thermally insulated containers.

Liquid hydrogen consists of 99.79% parahydrogen, 0.21% orthohydrogen.^[6]

History

1756 - The first documented public demonstration of artificial refrigeration by William Cullen^[7], Gaspard Monge liquefied the first gas producing liquid sulfur dioxide in 1784. Michael Faraday liquefied ammonia to cause cooling, Oliver Evans designed the first closed circuit refrigeration machine in 1805, Jacob Perkins patented the first refrigerating machine in 1834 and John Gorrie patented his mechanical refrigeration machine in 1851 in the US to make ice to cool the air^[8]^[9], Siemens introduced the Regenerative cooling concept in 1857, Carl von Linde patented equipment to liquefy air using tile Joule Thomson expansion process and regenerative cooling^[10] in 1876, in 1885 Zygmunt Florenty Wróblewski published hydrogen's critical temperature as 33 K; critical pressure, 13.3 atmospheres; and boiling point, 23 K.

Hydrogen was liquefied for the first time by James Dewar in 1898 by using regenerative cooling and his invention, the vacuum flask. The first synthesis of the stable isomer form of liquid hydrogen, parahydrogen was achieved by Paul Harteck and Karl Friedrich Bonhoeffer in 1929.

Spin isomers of hydrogen

Room temperature hydrogen consists mostly of the orthohydrogen form. After production, liquid hydrogen is in a metastable state and must be converted into the parahydrogen isomer form to avoid the exothermic reaction that occur when it changes at low temperatures, this is usually performed using a catalyst like ferric oxide, activated carbon, platinized asbestos, rare earth metals, uranium compounds, chromic oxide, or some nickel compounds^[11].

Uses

It is a common liquid rocket fuel for rocket applications. In most rocket engines fueled by liquid hydrogen, it first cools the nozzle and other parts before being mixed with the oxidizer (usually liquid oxygen (LOX)) and burned to produce water with traces of ozone and hydrogen peroxide. Practical H2/O2 rocket engines run fuel-rich so that the exhaust contains some unburned hydrogen. This reduces combustion chamber and nozzle erosion. It also reduces the molecular weight of the exhaust that can actually increase specific impulse despite the incomplete combustion. Template:Infobox liquid hydrogen Liquid hydrogen can be used as the fuel storage in an internal combustion engine or fuel cell. Various submarines (Type 212 submarine, Type 214 submarine) and concept hydrogen vehicles have been built using this form of hydrogen (see DeepC, BMW H2R). Due to its similarity, builders can sometimes modify and share equipment with systems designed for LNG. However, because of the lower volumetric energy, the hydrogen volumes needed for combustion are large. Unless LH2 is injected instead of gas, hydrogen-fueled piston engines usually require larger fuel systems. Unless direct injection is used, a severe gas-displacement effect also hampers maximum breathing and increases pumping losses.

Liquid hydrogen is also used to cool neutrons to be used in neutron scattering. Since neutrons and hydrogen nuclei have similar masses, kinetic energy exchange per interaction is maximum (elastic collision).

Advantages

Producing “zero emissions”, the byproducts of its combustion with oxygen alone are mainly water vapor. And since water is typically harmless to the environment.

Drawbacks

One liter of hydrogen weighs only 70 grams. That is a density of 70.99 g/L (at 20 K). Liquid hydrogen requires cryogenic storage technology such as the special thermally insulated containers and requires special handling common to all cryogenic fuels. This is similar to, but more severe than liquid oxygen. Even with thermally insulated containers it is difficult to keep such a low temperature, and the hydrogen will gradually leak away (Typically it will evaporate at a rate of 1% per day^[12]). It also shares many of the same safety issues as other forms of hydrogen, as well as being cold enough to liquefy (and possibly solidify) atmospheric oxygen which can be an explosion hazard.

References

^ ^a ^b ^c ^d ^e Information specific to liquid hydrogen, harvard.edu, accessed 2009-06-12
^ IPTS-1968, iupac.org, accessed 2009-06-12
^ Yunus A. Cengel, Robert H. Turner. Fundamentals of thermal-fluid sciences, McGraw-Hill, 2004, p. 78, ISBN 0072976756
^ IPTS-1968, iupac.org, accessed 2009-06-12
^ Chemical elements data references
^ Liquid Air/LH2
^ William Cullen, Of the Cold Produced by Evaporating Fluids and of Some Other Means of Producing Cold, in Essays and Observations Physical and Literary Read Before a Society in Edinburgh and Published by Them, II, (Edinburgh 1756)
^ 1851 John Gorrie
^ 1851 Patent 8080
^ Hydrogen through the Nineteenth Century
^ Ortho-Para conversion. Pag. 13
^ http://www.almc.army.mil/alog/issues/MayJun00/MS492.htm

[h-1] Information specific to liquid hydrogen, harvard.edu, accessed 2009-06-12

[2] IPTS-1968, iupac.org, accessed 2009-06-12

[3] Yunus A. Cengel, Robert H. Turner. Fundamentals of thermal-fluid sciences, McGraw-Hill, 2004, p. 78, ISBN 0072976756

[4] IPTS-1968, iupac.org, accessed 2009-06-12

[5] Chemical elements data references

[6] Liquid Air/LH2

[7] William Cullen, Of the Cold Produced by Evaporating Fluids and of Some Other Means of Producing Cold, in Essays and Observations Physical and Literary Read Before a Society in Edinburgh and Published by Them, II, (Edinburgh 1756)

[8] 1851 John Gorrie

[9] 1851 Patent 8080

[10] Hydrogen through the Nineteenth Century

[11] Ortho-Para conversion. Pag. 13

[12] ttp://www.almc.army.mil/alog/issues/MayJun00/MS492.htm

[1]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

@@ Line 73: / Line 73: @@
 ==Advantages==
-Producing “zero emissions”, the byproducts of its combustion with oxygen alone are mainly water vapor. And since water is typically not only harmless to the environment.
+Producing “zero emissions”, the byproducts of its combustion with oxygen alone are mainly water vapor. And since water is typically harmless to the environment.
 ==Drawbacks==