Ethylene glycol: Difference between revisions
→Toxicity: Annual deaths; environmental aspects |
→External links: CDC ATSDR - ToxFAQs - Ethylene Glycol |
||
Line 258: | Line 258: | ||
== External links == |
== External links == |
||
* [http://webbook.nist.gov/cgi/cbook.cgi?ID=C107211 WebBook page for C2H6O2] |
* [http://webbook.nist.gov/cgi/cbook.cgi?ID=C107211 WebBook page for C2H6O2] |
||
* [http://www.atsdr.cdc.gov/tfacts96.html CDC ATSDR - ToxFAQs - Ethylene Glycol] |
|||
* [http://www.atsdr.cdc.gov/csem/egpg/index.html ATSDR - Case Studies in Environmental Medicine: Ethylene Glycol and Propylene Glycol Toxicity] |
* [http://www.atsdr.cdc.gov/csem/egpg/index.html ATSDR - Case Studies in Environmental Medicine: Ethylene Glycol and Propylene Glycol Toxicity] |
||
* [http://www.npi.gov.au/database/substance-info/profiles/41.html National Pollutant Inventory — Ethylene glycol fact sheet] |
* [http://www.npi.gov.au/database/substance-info/profiles/41.html National Pollutant Inventory — Ethylene glycol fact sheet] |
Revision as of 16:21, 18 August 2010
![]() | |
![]() | |
![]() | |
Names | |
---|---|
IUPAC name
Ethane-1,2-diol
| |
Other names
ethylene glycol, monoethylene glycol
MEG 1,2-ethanediol, MEG, glycol | |
Identifiers | |
3D model (JSmol)
|
|
ECHA InfoCard | 100.003.159 |
PubChem CID
|
|
CompTox Dashboard (EPA)
|
|
| |
Properties | |
C2H6O2 | |
Molar mass | 62.068 g/mol |
Density | 1.1132 g/cm³ |
Melting point | −12.9 °C (260 K) |
Boiling point | 197.3 °C (470 K) |
Miscible with water in all proportions. | |
Viscosity | 1.61 × 10−2 N*s / m2[1] |
Hazards | |
Occupational safety and health (OHS/OSH): | |
Main hazards
|
It is extremely harmful to pets.It is not so great for humans but they will survive. If digested get medical help immediatley. |
NFPA 704 (fire diamond) | |
Flash point | 111 °C (closed cup) |
Related compounds | |
Supplementary data page | |
Ethylene glycol (data page) | |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Ethylene glycol (IUPAC name: ethane-1,2-diol) is an organic compound widely used as an automotive antifreeze and a precursor to polymers. In its pure form, it is an odorless, colorless, syrupy, sweet-tasting liquid. Ethylene glycol is toxic, and ingestion can result in death.
Ethylene glycol is not to be confused with diethylene glycol, a heavier ether diol, or with polyethylene glycol, a nontoxic polyether polymer.
Production
Historical aspects and natural occurrence
Ethylene glycol was first prepared in 1859 by the French chemist Charles-Adolphe Wurtz from ethylene glycol diacetate via saponification with potassium hydroxide and, in 1860, from the hydration of ethylene oxide. There appears to have been no commercial manufacture or application of ethylene glycol prior to World War I, when it was synthesized from ethylene dichloride in Germany and used as a substitute for glycerol in the explosives industry.
In the United States, semi-commercial production of ethylene glycol via ethylene chlorohydrin started in 1917. The first large-scale commercial glycol plant was erected in 1925 at South Charleston, West Virginia, by Carbide and Carbon Chemicals Co. (now Union Carbide Corp.). By 1929, ethylene glycol was being used by almost all dynamite manufacturers.
In 1937, Carbide started up the first plant based on Lefort's process for vapor-phase oxidation of ethylene to ethylene oxide. Carbide maintained a monopoly on the direct oxidation process until 1953 when the Scientific Design process was commercialized and offered for licenses.
This molecule has been observed in outer space.[2]
Current methods
Ethylene glycol is produced from ethylene (ethene), via the intermediate ethylene oxide. Ethylene oxide reacts with water to produce ethylene glycol according to the chemical equation-
- C2H4O + H2O → HOCH2CH2OH
This reaction can be catalyzed by either acids or bases, or can occur at neutral pH under elevated temperatures. The highest yields of ethylene glycol occur at acidic or neutral pH with a large excess of water. Under these conditions, ethylene glycol yields of 90% can be achieved. The major byproducts are the ethylene glycol oligomers diethylene glycol, triethylene glycol, and tetraethylene glycol. About 6.7 billion kilograms are produced annually.[3]
Uses
Approximately 60% of ethylene glycol is consumed for antifreeze, and the remainder is mainly used as a precursor to polymers. Because this material is cheaply available, it finds many niche applications.[3]
Coolant and heat transfer agent
The major use of ethylene glycol is as a medium for convective heat transfer in, for example, automobiles and liquid cooled computers. Ethylene glycol is also commonly used in chilled water air conditioning systems that place either the chiller or air handlers outside, or systems that must cool below the freezing temperature of water. In geothermal heating/cooling systems, ethylene glycol is the fluid that transports heat through the use of a geothermal heat pump. The ethylene glycol either gains energy from the source (lake, ocean, water well) or dissipates heat to the source, depending if the system is being used for heating or cooling.
Due to its low freezing point and tendency to form glasses, ethylene glycol resists freezing. A mixture of 60% ethylene glycol and 40% water does not freeze until temperatures below -45 °C.[3] Diethyleneglycol behaves similarly. It is used as a deicing fluid for windshields and aircraft. The antifreeze capabilities of ethylene glycol have made it an important component of vitrification (anti-crystallization) mixtures for low-temperature preservation of biological tissues and organs.
Ethylene glycol disrupts hydrogen bonding when dissolved in water. Pure ethylene glycol freezes at about -12 °C, but when intermixed with water molecules, neither can readily form a solid crystal structure, and therefore the freezing point of the mixture is depressed significantly. The minimum freezing point is observed when the ethylene glycol percent in water is about 70%, as shown below. This is the reason pure ethylene glycol is not used as an antifreeze--water is a necessary component as well.
Weight Percent EG (%) | Freezing Point (deg F) | Freezing Point (deg C) |
---|---|---|
0 | 32 | 0 |
10 | 25 | -4 |
20 | 20 | -7 |
30 | 5 | -15 |
40 | -10 | -23 |
50 | -30 | -34 |
60 | -55 | -48 |
70 | -60 | -51 |
80 | -50 | -45 |
90 | -20 | -29 |
100 | 10 | -12 |
However, the boiling point for aqueous ethylene glycol increases monotonically with increasing ethylene glycol percentage. Thus, the use of ethylene glycol not only depresses the freezing point but also elevates the boiling point such that the operating range for the heat transfer fluid is broadened on both ends of the temperature scale. The increase in boiling temperature is due to pure ethylene glycol having a much higher boiling point and lower vapour pressure than pure water; there is no chemical stabilisation against boiling of the liquid phase at intermediate compositions, as there is against freezing.
Weight Percent EG (%) | Boiling Point (deg F) | Boiling Point (deg C) |
---|---|---|
0 | 212 | 100 |
10 | 215 | 102 |
20 | 215 | 102 |
30 | 220 | 104 |
40 | 220 | 104 |
50 | 225 | 107 |
60 | 230 | 110 |
70 | 240 | 116 |
80 | 255 | 124 |
90 | 285 | 140 |
100 | 387 | 197 |
Precursor to polymers
In the plastics industry, ethylene glycol is important precursor to polyester fibers and resins. Polyethylene terephthalate, used to make plastic bottles for soft drinks, is prepared from ethylene glycol.
Hydrate inhibition
Because of its high boiling point and affinity for water, ethylene glycol is a useful desiccant. Ethylene glycol is widely used to inhibit the formation of natural gas clathrates (hydrates) in long multiphase pipelines that convey natural gas from remote gas fields to an onshore processing facility. Ethylene glycol can be recovered from the natural gas and reused as an inhibitor after purification treatment that removes water and inorganic salts.
Natural gas is dehydrated by ethylene glycol. In this application, ethylene glycol flows down from the top of a tower and meets a rising mixture of water vapor and hydrocarbon gases. Dry gas exits from the top of the tower. The glycol and water are separated, and the glycol recycled. Instead of removing water, ethylene glycol can also be used to depress the temperature at which hydrates are formed. The purity of glycol used for hydrate suppression (mono-ethylene glycol) is typically around 80%, whereas the purity of glycol used for dehydration (tri-ethylene glycol) is typically 95-99+%. Moreover, the injection rate for hydrate suppression is much lower than the circulation rate in a glycol dehydration tower.
Niche applications
Minor uses of ethylene glycol include the manufacture of capacitors, as a chemical intermediate in the manufacture of 1,4-dioxane and as an additive to prevent corrosion in liquid cooling systems for personal computers. Ethylene glycol is also used in the manufacture of some vaccines, but it is not itself present in these injections. It is used as a minor (1–2%) ingredient in shoe polish and also in some inks and dyes. Ethylene glycol has seen some use as a rot and fungal treatment for wood, both as a preventative and a treatment after the fact. It has been used in a few cases to treat partially rotted wooden objects to be displayed in museums. It is one of only a few treatments that are successful in dealing with rot in wooden boats, and is relatively cheap. Ethylene glycol may also be one of the minor ingredients in screen cleaning solutions, along with the main ingredient isopropyl alcohol. Ethylene glycol is commonly used as a preservative for biological specimens, especially in secondary schools during dissection as a safer alternative to formaldehyde. It can also be used in killing jars.
Chemical reactions
Ethylene glycol is used as a protecting group for carbonyl groups in organic synthesis. Treating a ketone or aldehyde with ethylene glycol in the presence of an acid catalyst (e.g., p-toluenesulfonic acid; BF3•Et2O) gives the corresponding a 1,3-dioxolane, which is resistant to bases and other nucleophiles. The 1,3-dioxolane protecting group can thereafter be removed by further acid hydrolysis.[4] In this example, isophorone was protected using ethylene glycol with p-toluenesulfonic acid in moderate yield. Water was removed by azeotropic distillation to shift the equilibrium to the right.[5]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/52/Ethylene_glycol_protecting_group.png/450px-Ethylene_glycol_protecting_group.png)
Toxicity
Ethylene glycol is moderately toxic with an oral LDLO = 786 mg/kg for humans.[6] The major danger is due to its sweet taste. Because of that, children and animals are more inclined to consume large quantities of it than they are other poisons. Upon ingestion, ethylene glycol is oxidized to glycolic acid which is, in turn, oxidized to oxalic acid, which is toxic. It and its toxic byproducts first affect the central nervous system, then the heart, and finally the kidneys. Ingestion of sufficient amounts can be fatal if untreated.[7]
According to the annual report of the American Association of Poison Control Centers' National Poison Data System in 2007, there were about 1000 total cases resulting in 16 deaths. The 2008 American Association of Poison Control Centers' National Poison Data System annual report lists 7 deaths.(Toxicity, Ethylene Glycol)
In the environment
- The primary source of ethylene glycol in the environment is from run-off at airports where is used in de-icing agents for runways and airplanes. Ethylene glycol can also enter the environment through the disposal of products that contain it.
- Ethylene glycol in air will break down in about 10 days.
- Ethylene glycol in water and in soil will breakdown within several days to a few weeks.(CDC ToxFAQs)
References
- ^ Elert, Glenn. "Viscosity". The Physics Hypertextbook. Retrieved 2007-10-02.
- ^ J. M. Hollis, F. J. Lovas, P. R. Jewell, L. H. Coudert (2002-05-20). "Interstellar Antifreeze: Ethylene Glycol". The AstroPhysical Journal. 571: L59–L62. doi:10.1086/341148.
{{cite journal}}
: CS1 maint: multiple names: authors list (link) - ^ a b c Siegfried Rebsdat1 and Dieter Mayer "Ethylene Glycol” in Ullmann’s Encyclopedia of Industrial Chemistry, 2002, Wiley-VCH, Weinheim.doi:10.1002/14356007.a10_101.
- ^ Theodora W. Greene, Peter G. M. Wuts (1999). Protective Groups in Organic Synthesis (Third ed.). John Wiley & Sons. pp. 312–322. ISBN 0-471-16019-9.
- ^ J. H. Babler, N. C. Malek and M. J. Coghlan (1978). "Selective hydrolysis of α,β- and β,γ-unsaturated ketals: method for deconjugation of β,β-disubstituted α,β-unsaturated ketones". J. Org. Chem. 43 (9): 1821–1823. doi:10.1021/jo00403a047.
- ^ Safety Officer in Physical Chemistry (November 23, 2009). "Safety (MSDS) data for ethylene glycol". Oxford University. Retrieved December 30, 2009.
- ^ Ethylene glycol. National Institute for Occupational Safety and Health. Emergency Response Database. August 22, 2008. Retrieved December 31, 2008.