Aerodynamics: Difference between revisions
→Modern beginnings - 18th to 19th century: mostly minor grammar edits, also defined wing loading |
→Practical flight - early 20th century: took out assertion about just beating Langley, couldn't find what flight was referred to in Samuel Pierpont Langley article, + a few minor |
||
Line 49: | Line 49: | ||
===Practical flight - early 20th century=== |
===Practical flight - early 20th century=== |
||
With the information contained in Chanute's book, the personal assistance of Chanute himself, and research carried out in their own wind tunnel, the [[Wright brothers]] gained |
With the information contained in Chanute's book, the personal assistance of Chanute himself, and research carried out in their own wind tunnel, the [[Wright brothers]] gained enough knowledge of aerodynamics to fly the first powered aircraft on December 17, 1903. The Wright brothers' flight confirmed or disproved a number of aerodynamics theories. Newton's drag force theory was finally proved incorrect. This first widely-publicised flight led to a more organized effort between aviators and scientists, leading the way to modern aerodynamics. |
||
During the time of the first flights, [[Frederick W. Lanchester]],<ref>{{cite book | author=Lanchester, F. W. | title=Aerodynamics | year=1907}}</ref> [[Martin Wilhelm Kutta]], and [[Nikolay Yegorovich Zhukovsky|Nikolai Zhukovsky]] independently created theories that connected [[Circulation (fluid dynamics)|circulation]] of a fluid flow to lift. Kutta and Zhukovsky went on to develop a two-dimensional wing theory. Expanding upon the work of Lanchester, [[Ludwig Prandtl]] is credited with developing the mathematics<ref>{{cite book | author=Prandtl, L. | title=Tragflügeltheorie | publisher=Göttinger Nachrichten, mathematischphysikalische Klasse, 451-477 | year=1919}}</ref> behind thin-airfoil and lifting-line theories as well as work with [[boundary layer]]s. Prandtl, a professor at the [[University of Göttingen]], instructed many students who would play important roles in the development of aerodynamics |
During the time of the first flights, [[Frederick W. Lanchester]],<ref>{{cite book | author=Lanchester, F. W. | title=Aerodynamics | year=1907}}</ref> [[Martin Wilhelm Kutta]], and [[Nikolay Yegorovich Zhukovsky|Nikolai Zhukovsky]] independently created theories that connected [[Circulation (fluid dynamics)|circulation]] of a fluid flow to lift. Kutta and Zhukovsky went on to develop a two-dimensional wing theory. Expanding upon the work of Lanchester, [[Ludwig Prandtl]] is credited with developing the mathematics<ref>{{cite book | author=Prandtl, L. | title=Tragflügeltheorie | publisher=Göttinger Nachrichten, mathematischphysikalische Klasse, 451-477 | year=1919}}</ref> behind thin-airfoil and lifting-line theories as well as work with [[boundary layer]]s. Prandtl, a professor at the [[University of Göttingen]], instructed many students who would play important roles in the development of aerodynamics, such as [[Theodore von Kármán]] and [[Michael Max Munk|Max Munk]]. |
||
===Faster than sound - later 20th century=== |
===Faster than sound - later 20th century=== |
Revision as of 16:31, 12 March 2012
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/fe/Airplane_vortex_edit.jpg/350px-Airplane_vortex_edit.jpg)
Aerodynamics is a branch of dynamics concerned with studying the motion of air, particularly when it interacts with a solid object. Aerodynamics is a subfield of fluid dynamics and gas dynamics, with much theory shared between them. Aerodynamics is often used synonymously with gas dynamics, with the difference being that gas dynamics applies to all gases.
Overview
Understanding motion of air (often called a flow field) around an object enables the calculation of forces and moments acting on the object. Typical properties calculated for a flow field include velocity, pressure, density and temperature as a function of spatial position and time. Aerodynamics allows the definition and solution of equations for the conservation of mass, momentum, and energy in air. The use of aerodynamics through mathematical analysis, empirical approximations, wind tunnel experimentation, and computer simulations form the scientific basis for heavier-than-air flight and a number of other technologies.
Aerodynamic problems can be classified according to the flow environment. External aerodynamics is the study of flow around solid objects of various shapes. Evaluating the lift and drag on an airplane or the shock waves that form in front of the nose of a rocket are examples of external aerodynamics. Internal aerodynamics is the study of flow through passages in solid objects. For instance, internal aerodynamics encompasses the study of the airflow through a jet engine or through an air conditioning pipe.
Aerodynamic problems can also be classified according to whether the flow speed is below, near or above the speed of sound. A problem is called subsonic if all the speeds in the problem are less than the speed of sound, transonic if speeds both below and above the speed of sound are present (normally when the characteristic speed is approximately the speed of sound), supersonic when the characteristic flow speed is greater than the speed of sound, and hypersonic when the flow speed is much greater than the speed of sound. Aerodynamicists disagree over the precise definition of hypersonic flow; minimum Mach numbers for hypersonic flow range from 3 to 12.
The influence of viscosity in the flow dictates a third classification. Some problems may encounter only very small viscous effects on the solution, in which case viscosity can be considered to be negligible. The approximations to these problems are called inviscid flows. Flows for which viscosity cannot be neglected are called viscous flows.
History
Early ideas - ancient times to the 17th century
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/d4/Design_for_a_Flying_Machine.jpg/300px-Design_for_a_Flying_Machine.jpg)
Humans have been harnessing aerodynamic forces for thousands of years with sailboats and windmills.[1] Images and stories of flight have appeared throughout recorded history,[2] such as the legendary story of Icarus and Daedalus.[3] Although observations of some aerodynamic effects such as wind resistance (e.g. drag) were recorded by Aristotle, Leonardo da Vinci and Galileo Galilei, very little effort was made to develop a rigorous quantitative theory of air flow prior to the 17th century.
In 1505, Leonardo da Vinci wrote the Codex on the Flight of Birds, one of the earliest treatises on aerodynamics. He notes for the first time that the center of gravity of a flying bird does not coincide with its center of pressure, and he describes the construction of an ornithopter, with flapping wings similar to a bird's.
Sir Isaac Newton was the first person to develop a theory of air resistance,[4] making him one of the first aerodynamicists. As part of that theory, Newton considered that drag was due to the dimensions of a body, the density of the fluid, and the velocity raised to the second power. These all turned out to be correct for low flow speeds. Newton also developed a law for the drag force on a flat plate inclined towards the direction of the fluid flow. Using F for the drag force, ρ for the density, S for the area of the flat plate, V for the flow velocity, and θ for the inclination angle, his law was expressed as
This equation is incorrect for the calculation of drag in most cases. Drag on a flat plate is closer to being linear with the angle of inclination as opposed to acting quadratically at low angles. The Newton formula can lead one to believe that flight is more difficult than it actually is, due to this overprediction of drag and thus required thrust, and it may have contributed to a delay in human flight. However, it is more correct for a very slender plate when the angle becomes large and flow separation occurs, or if the flow speed is supersonic.[5]
Modern beginnings - 18th to 19th century
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/3d/Governableparachute.jpg/200px-Governableparachute.jpg)
In 1738 The Dutch-Swiss mathematician Daniel Bernoulli published Hydrodynamica, in which he described the fundamental relationship among pressure, density, and velocity; in particular Bernoulli's principle, which is one method to calculate aerodynamic lift.[6] More general equations of fluid flow - the Euler equations - were published by Leonhard Euler in 1757. The Euler equations were extended to incorporate the effects of viscosity in the first half of the 1800s, resulting in the Navier-Stokes equations.
Sir George Cayley is credited as the first person to identify the four aerodynamic forces of flight—weight, lift, drag, and thrust—and the relationships between them.[7][8] Cayley believed that the drag on a flying machine must be counteracted by a means of propulsion in order for level flight to occur. Cayley also looked to nature for aerodynamic shapes with low drag. Among the shapes he investigated were the cross-sections of trout. This may appear counterintuitive, however, the bodies of fish are shaped to produce very low resistance as they travel through water. Their cross-sections are sometimes very close to that of modern low-drag airfoils.
Air resistance experiments were carried out by investigators throughout the 18th and 19th centuries. Drag theories were developed by Jean le Rond d'Alembert,[9] Gustav Kirchhoff,[10] and Lord Rayleigh.[11] Equations for fluid flow with friction were developed by Claude-Louis Navier[12] and George Gabriel Stokes.[13] To simulate fluid flow, many experiments involved immersing objects in streams of water or simply dropping them off the top of a tall building. Towards the end of this time period Gustave Eiffel used his Eiffel Tower to assist in the drop testing of flat plates.
A more precise way to measure resistance is to place an object within an artificial, uniform stream of air where the velocity is known. The first person to experiment in this fashion was Francis Herbert Wenham, who in doing so constructed the first wind tunnel in 1871. Wenham was also a member of the first professional organization dedicated to aeronautics, the Royal Aeronautical Society of the United Kingdom. Objects placed in wind tunnel models are almost always smaller than in practice, so a method was needed to relate small scale models to their real-life counterparts. This was achieved with the invention of the dimensionless Reynolds number by Osborne Reynolds.[14] Reynolds also experimented with laminar to turbulent flow transition in 1883.
By the late 19th century, two problems were identified before heavier-than-air flight could be realized. The first was the creation of low-drag, high-lift aerodynamic wings. The second problem was how to determine the power needed for sustained flight. During this time, the groundwork was laid down for modern day fluid dynamics and aerodynamics, with other less scientifically-inclined enthusiasts testing various flying machines with little success.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/4/4e/WB_Wind_Tunnel.jpg/300px-WB_Wind_Tunnel.jpg)
In 1889, Charles Renard, a French aeronautical engineer, became the first person to reasonably predict the power needed for sustained flight.[15] Renard and German physicist Hermann von Helmholtz explored the wing loading (weight to wing-area ratio) of birds, eventually concluding that humans could not fly under their own power by attaching wings onto their arms. Otto Lilienthal, following the work of Sir George Cayley, was the first person to become highly successful with glider flights. Lilienthal believed that thin, curved airfoils would produce high lift and low drag.
Octave Chanute provided a great service to those interested in aerodynamics and flying machines by publishing a book outlining all of the research conducted around the world up to 1893.[16]
Practical flight - early 20th century
With the information contained in Chanute's book, the personal assistance of Chanute himself, and research carried out in their own wind tunnel, the Wright brothers gained enough knowledge of aerodynamics to fly the first powered aircraft on December 17, 1903. The Wright brothers' flight confirmed or disproved a number of aerodynamics theories. Newton's drag force theory was finally proved incorrect. This first widely-publicised flight led to a more organized effort between aviators and scientists, leading the way to modern aerodynamics.
During the time of the first flights, Frederick W. Lanchester,[17] Martin Wilhelm Kutta, and Nikolai Zhukovsky independently created theories that connected circulation of a fluid flow to lift. Kutta and Zhukovsky went on to develop a two-dimensional wing theory. Expanding upon the work of Lanchester, Ludwig Prandtl is credited with developing the mathematics[18] behind thin-airfoil and lifting-line theories as well as work with boundary layers. Prandtl, a professor at the University of Göttingen, instructed many students who would play important roles in the development of aerodynamics, such as Theodore von Kármán and Max Munk.
Faster than sound - later 20th century
As aircraft began to travel faster, aerodynamicists realized that the density of air began to change as it came into contact with an object, leading to a division of fluid flow into the incompressible and compressible regimes. In compressible aerodynamics, density and pressure both change, which is the basis for calculating the speed of sound. Newton was the first to develop a mathematical model for calculating the speed of sound, but it was not correct until Pierre-Simon Laplace accounted for the molecular behavior of gases and introduced the heat capacity ratio. The ratio of the flow speed to the speed of sound was named the Mach number after Ernst Mach, who was one of the first to investigate the properties of supersonic flow which included Schlieren photography techniques to visualize the changes in density. William John Macquorn Rankine and Pierre Henri Hugoniot independently developed the theory for flow properties before and after a shock wave. Jakob Ackeret led the initial work on calculating the lift and drag on a supersonic airfoil.[19] Theodore von Kármán and Hugh Latimer Dryden introduced the term transonic to describe flow speeds around Mach 1 where drag increases rapidly. Because of the increase in drag approaching Mach 1, aerodynamicists and aviators disagreed on whether supersonic flight was achievable.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/55/X-43A_%28Hyper_-_X%29_Mach_7_computational_fluid_dynamic_%28CFD%29.jpg/300px-X-43A_%28Hyper_-_X%29_Mach_7_computational_fluid_dynamic_%28CFD%29.jpg)
On September 30, 1935 an exclusive conference was held in Rome with the topic of high velocity flight and the possibility of breaking the sound barrier.[20] Participants included Theodore von Kármán, Ludwig Prandtl, Jakob Ackeret, Eastman Jacobs, Adolf Busemann, Geoffrey Ingram Taylor, Gaetano Arturo Crocco, and Enrico Pistolesi. Ackeret presented a design for a supersonic wind tunnel. Busemann gave a presentation on the need for aircraft with swept wings for high speed flight. Eastman Jacobs, working for NACA, presented his optimized airfoils for high subsonic speeds which led to some of the high performance American aircraft during World War II. Supersonic propulsion was also discussed. The sound barrier was broken using the Bell X-1 aircraft twelve years later, thanks in part to those individuals.
By the time the sound barrier was broken, much of the subsonic and low supersonic aerodynamics knowledge had matured. The Cold War fueled an ever evolving line of high performance aircraft. Computational fluid dynamics was started as an effort to solve for flow properties around complex objects and has rapidly grown to the point where entire aircraft can be designed using a computer.
With some exceptions, the knowledge of hypersonic aerodynamics has matured between the 1960s and the present decade. Therefore, the goals of an aerodynamicist have shifted from understanding the behavior of fluid flow to understanding how to engineer a vehicle to interact appropriately with the fluid flow. For example, while the behavior of hypersonic flow is understood, building a scramjet aircraft to fly at hypersonic speeds has seen very limited success. Along with building a successful scramjet aircraft, the desire to improve the aerodynamic efficiency of current aircraft and propulsion systems will continue to fuel new research in aerodynamics.
Introductory terminology
Continuity assumption
Gases are composed of molecules which collide with one another and solid objects. If density and velocity are taken to be well-defined at infinitely small points, and are assumed to vary continuously from one point to another, the discrete molecular nature of a gas is ignored.
The continuity assumption becomes less valid as a gas becomes more rarefied. In these cases, statistical mechanics is a more valid method of solving the problem than continuous aerodynamics. The Knudsen number can be used to guide the choice between statistical mechanics and the continuous formulation of aerodynamics.
Laws of conservation
Aerodynamics problems are often solved using conservation laws as applied to a fluid continuum. The conservation laws can be written in integral or differential form. In many basic problems, three conservation principles are used:
- Continuity: If a certain mass of fluid enters a volume, it must either exit the volume or change the mass inside the volume. In fluid dynamics, the continuity equation is analogous to Kirchhoff's Current Law in electric circuits. The differential form of the continuity equation is:
Above, is the fluid density, u is a velocity vector, and t is time. Physically, the equation also shows that mass is neither created nor destroyed in the control volume.[21] For a steady state process, the rate at which mass enters the volume is equal to the rate at which it leaves the volume.[22] Consequently, the first term on the left is then equal to zero. For flow through a tube with one inlet (state 1) and exit (state 2) as shown in the figure in this section, the continuity equation may be written and solved as:
Above, A is the variable cross-section area of the tube at the inlet and exit. For incompressible flows, density remains constant.
- Conservation of Momentum: This equation applies Newton's second law of motion to a continuum, whereby force is equal to the time derivative of momentum. Both surface and body forces are accounted for in this equation. For instance, F could be expanded into an expression for the frictional force acting on an internal flow.
For the same figure, a control volume analysis yields:
Above, the force is placed on the left side of the equation, assuming it acts with the flow moving in a left-to-right direction. Depending on the other properties of the flow, the resulting force could be negative which means it acts in the opposite direction as depicted in the figure.
- Conservation of Energy: Although energy can be converted from one form to another, the total energy in a given system remains constant.
Above, h is enthalpy, k is the thermal conductivity of the fluid, T is temperature, and is the viscous dissipation function. The viscous dissipation function governs the rate at which mechanical energy of the flow is converted to heat. The term is always positive since, according to the second law of thermodynamics, viscosity cannot add energy to the control volume.[23] The expression on the left side is a material derivative. Again using the figure, the energy equation in terms of the control volume may be written as:
Above, the shaft work and heat transfer are assumed to be acting on the flow. They may be positive (to the flow from the surroundings) or negative (to the surroundings from the flow) depending on the problem. The ideal gas law or another equation of state is often used in conjunction with these equations to form a system to solve for the unknown variables.
Incompressible aerodynamics
An incompressible flow is characterized by a constant density despite flowing over surfaces or inside ducts. A flow can be considered incompressible as long as its speed is low. For higher speeds, the flow will begin to compress as it comes into contact with surfaces. The Mach number is used to distinguish between incompressible and compressible flows.
Subsonic flow
Subsonic (or low-speed) aerodynamics is the study of fluid motion which is everywhere much slower than the speed of sound through the fluid or gas. There are several branches of subsonic flow but one special case arises when the flow is inviscid, incompressible and irrotational. This case is called Potential flow and allows the differential equations used to be a simplified version of the governing equations of fluid dynamics, thus making available to the aerodynamicist a range of quick and easy solutions.[24] It is a special case of Subsonic aerodynamics.
In solving a subsonic problem, one decision to be made by the aerodynamicist is whether to incorporate the effects of compressibility. Compressibility is a description of the amount of change of density in the problem. When the effects of compressibility on the solution are small, the aerodynamicist may choose to assume that density is constant. The problem is then an incompressible low-speed aerodynamics problem. When the density is allowed to vary, the problem is called a compressible problem. In air, compressibility effects are usually ignored when the Mach number in the flow does not exceed 0.3 (about 335 feet (102m) per second or 228 miles (366 km) per hour at 60 °F). Above 0.3, the problem should be solved by using compressible aerodynamics.
Compressible aerodynamics
According to the theory of aerodynamics, a flow is considered to be compressible if its change in density with respect to pressure is non-zero along a streamline. This means that - unlike incompressible flow - changes in density must be considered. In general, this is the case where the Mach number in part or all of the flow exceeds 0.3. The Mach .3 value is rather arbitrary, but it is used because gas flows with a Mach number below that value demonstrate changes in density with respect to the change in pressure of less than 5%. Furthermore, that maximum 5% density change occurs at the stagnation point of an object immersed in the gas flow and the density changes around the rest of the object will be significantly lower. Transonic, supersonic, and hypersonic flows are all compressible.
Transonic flow
The term Transonic refers to a range of velocities just below and above the local speed of sound (generally taken as Mach 0.8–1.2). It is defined as the range of speeds between the critical Mach number, when some parts of the airflow over an aircraft become supersonic, and a higher speed, typically near Mach 1.2, when all of the airflow is supersonic. Between these speeds some of the airflow is supersonic, and some is not.
Supersonic flow
Supersonic aerodynamic problems are those involving flow speeds greater than the speed of sound. Calculating the lift on the Concorde during cruise can be an example of a supersonic aerodynamic problem.
Supersonic flow behaves very differently from subsonic flow. Fluids react to differences in pressure; pressure changes are how a fluid is "told" to respond to its environment. Therefore, since sound is in fact an infinitesimal pressure difference propagating through a fluid, the speed of sound in that fluid can be considered the fastest speed that "information" can travel in the flow. This difference most obviously manifests itself in the case of a fluid striking an object. In front of that object, the fluid builds up a stagnation pressure as impact with the object brings the moving fluid to rest. In fluid traveling at subsonic speed, this pressure disturbance can propagate upstream, changing the flow pattern ahead of the object and giving the impression that the fluid "knows" the object is there and is avoiding it. However, in a supersonic flow, the pressure disturbance cannot propagate upstream. Thus, when the fluid finally does strike the object, it is forced to change its properties -- temperature, density, pressure, and Mach number -- in an extremely violent and irreversible fashion called a shock wave. The presence of shock waves, along with the compressibility effects of high-velocity (see Reynolds number) fluids, is the central difference between supersonic and subsonic aerodynamics problems.
Hypersonic flow
In aerodynamics, hypersonic speeds are speeds that are highly supersonic. In the 1970s, the term generally came to refer to speeds of Mach 5 (5 times the speed of sound) and above. The hypersonic regime is a subset of the supersonic regime. Hypersonic flow is characterized by high temperature flow behind a shock wave, viscous interaction, and chemical dissociation of gas.
Associated terminology
![](http://upload.wikimedia.org/wikipedia/commons/thumb/9/92/Types_of_flow_analysis_in_fluid_mechanics.svg/320px-Types_of_flow_analysis_in_fluid_mechanics.svg.png)
The incompressible and compressible flow regimes produce many associated phenomena, such as boundary layers and turbulence.
Boundary layers
The concept of a boundary layer is important in many aerodynamic problems. The viscosity and fluid friction in the air is approximated as being significant only in this thin layer. This principle makes aerodynamics much more tractable mathematically.
Turbulence
In aerodynamics, turbulence is characterized by chaotic, stochastic property changes in the flow. This includes low momentum diffusion, high momentum convection, and rapid variation of pressure and velocity in space and time. Flow that is not turbulent is called laminar flow.
Aerodynamics in other fields
Aerodynamics is important in a number of applications other than aerospace engineering. It is a significant factor in any type of vehicle design, including automobiles. It is important in the prediction of forces and moments in sailing. It is used in the design of mechanical components such as hard drive heads. Structural engineers also use aerodynamics, and particularly aeroelasticity, to calculate wind loads in the design of large buildings and bridges. Urban aerodynamics seeks to help town planners and designers improve comfort in outdoor spaces, create urban microclimates and reduce the effects of urban pollution. The field of environmental aerodynamics studies the ways atmospheric circulation and flight mechanics affect ecosystems. The aerodynamics of internal passages is important in heating/ventilation, gas piping, and in automotive engines where detailed flow patterns strongly affect the performance of the engine.
See also
- List of aerospace engineering topics
- List of engineering topics
- Automotive aerodynamics
- Aeronautics
- Aviation
- Fluid dynamics
- Aerostatics
- Nose cone design
- Bernoulli's principle
- Navier-Stokes equations
- Center of pressure
- Computational Fluid Dynamics
- Transonic flows.
- Supersonic flows.
- Hypersonic flows.
- Sound barrier
References
- ^ "...it shouldn't be imagined that aerodynamic lift (the force that makes airplanes fly) is a modern concept that was unknown to the ancients. The earliest known use of wind power, of course, is the sail boat, and this technology had an important impact on the later development of sail-type windmills. Ancient sailors understood lift and used it every day, even though they didn't have the physics to explain how or why it worked." Wind Power's Beginnings (1000 B.C. - 1300 A.D.) Illustrated History of Wind Power Development http://telosnet.com/wind/early.html
- ^ Don Berliner (1997). "Aviation: Reaching for the Sky". The Oliver Press, Inc. p.128. ISBN 1-881508-33-1
- ^ Ovid; Gregory, H. (2001). The Metamorphoses. Signet Classics. ISBN 0451527933. OCLC 45393471.
{{cite book}}
: CS1 maint: multiple names: authors list (link) - ^ Newton, I. (1726). Philosophiae Naturalis Principia Mathematica, Book II.
- ^ von Karman, Theodore (2004). Aerodynamics: Selected Topics in the Light of Their Historical Development. Dover Publications. ISBN 0486434850. OCLC 53900531.
- ^ "Hydrodynamica". Britannica Online Encyclopedia. Retrieved 2008-10-30.
- ^ "U.S Centennial of Flight Commission - Sir George Cayley". Retrieved 2008-09-10.
Sir George Cayley, born in 1773, is sometimes called the Father of Aviation. A pioneer in his field, he was the first to identify the four aerodynamic forces of flight - weight, lift, drag, and thrust and their relationship. He was also the first to build a successful human-carrying glider. Cayley described many of the concepts and elements of the modern airplane and was the first to understand and explain in engineering terms the concepts of lift and thrust.
- ^ d'Alembert, J. (1752). Essai d'une nouvelle theorie de la resistance des fluides.
- ^ Kirchhoff, G. (1869). Zur Theorie freier Flussigkeitsstrahlen. Journal fur die reine und angewandte Mathematik (70), 289-298.
- ^ Rayleigh, Lord (1876). On the Resistance of Fluids. Philosophical Magazine (5)2, 430-441.
- ^ Navier, C. L. M. H. (1827). Memoire sur les lois du mouvement des fluides. Memoires de l'Academie des Sciences (6), 389-440.
- ^ Stokes, G. (1845). On the Theories of the Internal Friction of Fluids in Motion. Transaction of the Cambridge Philosophical Society (8), 287-305.
- ^ Reynolds, O. (1883). An Experimental Investigation of the Circumstances which Determine whether the Motion of Water Shall Be Direct or Sinuous and of the Law of Resistance in Parallel Channels. Philosophical Transactions of the Royal Society of London A-174, 935-982.
- ^ Renard, C. (1889). Nouvelles experiences sur la resistance de l'air. L'Aeronaute (22) 73-81.
- ^ Chanute, Octave (1997). Progress in Flying Machines. Dover Publications. ISBN 0486299813. OCLC 37782926.
- ^ Lanchester, F. W. (1907). Aerodynamics.
- ^ Prandtl, L. (1919). Tragflügeltheorie. Göttinger Nachrichten, mathematischphysikalische Klasse, 451-477.
- ^ Ackeret, J. (1925). Luftkrafte auf Flugel, die mit der grosserer als Schallgeschwindigkeit bewegt werden. Zeitschrift fur Flugtechnik und Motorluftschiffahrt (16), 72-74.
- ^ Anderson, John D. (2007). Fundamentals of Aerodynamics (4th ed.). McGraw-Hill. ISBN 0071254080. OCLC 60589123.
- ^ Anderson, J.D., Fundamentals of Aerodynamics, 4th Ed., McGraw-Hill, 2007.
- ^ Clancy, L.J.(1975), Aerodynamics, Section 3.3, Pitman Publishing Limited, London
- ^ White, F.M., Viscous Fluid Flow, McGraw-Hill, 1974.
- ^ Katz, Joseph (1991). Low-speed aerodynamics: From wing theory to panel methods. McGraw-Hill series in aeronautical and aerospace engineering. New York: McGraw-Hill. ISBN 0070504466. OCLC 21593499.
Further reading
General Aerodynamics
- Anderson, John D. (2007). Fundamentals of Aerodynamics (4th ed.). McGraw-Hill. ISBN 0071254080. OCLC 60589123.
- Bertin, J. J.; Smith, M. L. (2001). Aerodynamics for Engineers (4th ed.). Prentice Hall. ISBN 0130646334. OCLC 47297603.
{{cite book}}
: CS1 maint: multiple names: authors list (link) - Smith, Hubert C. (1991). Illustrated Guide to Aerodynamics (2nd ed.). McGraw-Hill. ISBN 0830639012. OCLC 24319048.
- Craig, Gale (2003). Introduction to Aerodynamics. Regenerative Press. ISBN 0964680637. OCLC 53083897.
Subsonic Aerodynamics
- Katz, Joseph; Plotkin, Allen (2001). Low-Speed Aerodynamics (2nd ed.). Cambridge University Press. ISBN 0521665523. OCLC 43970751 45992085.
{{cite book}}
: Check|oclc=
value (help)CS1 maint: multiple names: authors list (link)
Transonic Aerodynamics
- Moulden, Trevor H. (1990). Fundamentals of Transonic Flow. Krieger Publishing Company. ISBN 0894644416. OCLC 20594163.
- Cole, Julian D; Cook, L. Pamela (1986). Transonic Aerodynamics. North-Holland. ISBN 0444879587. OCLC 13094084.
{{cite book}}
: CS1 maint: multiple names: authors list (link)
Supersonic Aerodynamics
- Ferri, Antonio (2005). Elements of Aerodynamics of Supersonic Flows (Phoenix ed.). Dover Publications. ISBN 0486442802. OCLC 58043501.
- Shapiro, Ascher H. (1953). The Dynamics and Thermodynamics of Compressible Fluid Flow, Volume 1. Ronald Press. ISBN 978-0-471-06691-0. OCLC 11404735 174280323 174455871 45374029.
{{cite book}}
: Check|oclc=
value (help) - Anderson, John D. (2004). Modern Compressible Flow. McGraw-Hill. ISBN 0071241361. OCLC 71626491.
- Liepmann, H. W.; Roshko, A. (2002). Elements of Gasdynamics. Dover Publications. ISBN 0486419630. OCLC 47838319.
- von Mises, Richard (2004). Mathematical Theory of Compressible Fluid Flow. Dover Publications. ISBN 0486439410. OCLC 56033096.
- Hodge, B. K. (1995). Compressible Fluid Dynamics with Personal Computer Applications. Prentice Hall. ISBN 013308552X. OCLC 31662199. ISBN 0-13-308552-X.
{{cite book}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help)
Hypersonic Aerodynamics
- Anderson, John D. (2006). Hypersonic and High Temperature Gas Dynamics (2nd ed.). AIAA. ISBN 1563477807. OCLC 68262944.
- Hayes, Wallace D.; Probstein, Ronald F. (2004). Hypersonic Inviscid Flow. Dover Publications. ISBN 0486432815. OCLC 53021584.
History of Aerodynamics
- Chanute, Octave (1997). Progress in Flying Machines. Dover Publications. ISBN 0486299813. OCLC 37782926.
- von Karman, Theodore (2004). Aerodynamics: Selected Topics in the Light of Their Historical Development. Dover Publications. ISBN 0486434850. OCLC 53900531.
- Anderson, John D. (1997). A History of Aerodynamics: And Its Impact on Flying Machines. Cambridge University Press. ISBN 0521454352. OCLC 228667184 231729782 35646587.
{{cite book}}
: Check|oclc=
value (help)
Aerodynamics Related to Engineering
Ground Vehicles
- Katz, Joseph (1995). Race Car Aerodynamics: Designing for Speed. Bentley Publishers. ISBN 0837601428. OCLC 181644146 32856137.
{{cite book}}
: Check|oclc=
value (help) - Barnard, R. H. (2001). Road Vehicle Aerodynamic Design (2nd ed.). Mechaero Publishing. ISBN 0954073401. OCLC 47868546.
Fixed-Wing Aircraft
- Ashley, Holt; Landahl, Marten (1985). Aerodynamics of Wings and Bodies (2nd ed.). Dover Publications. ISBN 0486648990. OCLC 12021729.
{{cite book}}
: CS1 maint: multiple names: authors list (link) - Abbott, Ira H.; von Doenhoff, A. E. (1959). Theory of Wing Sections: Including a Summary of Airfoil Data. Dover Publications. ISBN 0486605868. OCLC 171142119.
{{cite book}}
: CS1 maint: multiple names: authors list (link) - Clancy, L.J. (1975). Aerodynamics. Pitman Publishing Limited. ISBN 0 273 01120 0. OCLC 16420565.
Helicopters
- Leishman, J. Gordon (2006). Principles of Helicopter Aerodynamics (2nd ed.). Cambridge University Press. ISBN 0521858607. OCLC 224565656 61463625.
{{cite book}}
: Check|oclc=
value (help) - Prouty, Raymond W. (2001). Helicopter Performance, Stability, and Control. Krieger Publishing Company Press. ISBN 1575242095. OCLC 212379050 77078136.
{{cite book}}
: Check|oclc=
value (help) - Seddon, J.; Newman, Simon (2001). Basic Helicopter Aerodynamics: An Account of First Principles in the Fluid Mechanics and Flight Dynamics of the Single Rotor Helicopter. AIAA. ISBN 1563475103. OCLC 47623950 60850095.
{{cite book}}
: Check|oclc=
value (help)CS1 maint: multiple names: authors list (link)
Missiles
- Nielson, Jack N. (1988). Missile Aerodynamics. AIAA. ISBN 0962062901. OCLC 17981448.
Model Aircraft
- Simons, Martin (1999). Model Aircraft Aerodynamics (4th ed.). Trans-Atlantic Publications, Inc. ISBN 1854861905. OCLC 43634314 51047735.
{{cite book}}
: Check|oclc=
value (help)
Related Branches of Aerodynamics
Aerothermodynamics
- Hirschel, Ernst H. (2004). Basics of Aerothermodynamics. Springer. ISBN 3540221328. OCLC 228383296 56755343 59203553.
{{cite book}}
: Check|oclc=
value (help) - Bertin, John J. (1993). Hypersonic Aerothermodynamics. AIAA. ISBN 1563470365. OCLC 28422796.
Aeroelasticity
- Bisplinghoff, Raymond L.; Ashley, Holt; Halfman, Robert L. (1996). Aeroelasticity. Dover Publications. ISBN 0486691896. OCLC 34284560.
{{cite book}}
: CS1 maint: multiple names: authors list (link) - Fung, Y. C. (2002). An Introduction to the Theory of Aeroelasticity (Phoenix ed.). Dover Publications. ISBN 0486495051. OCLC 55087733.
Boundary Layers
- Young, A. D. (1989). Boundary Layers. AIAA. ISBN 0930403576. OCLC 19981526.
- Rosenhead, L. (1988). Laminar Boundary Layers. Dover Publications. ISBN 0486656462. OCLC 17619090 21227855.
{{cite book}}
: Check|oclc=
value (help)
Turbulence
- Tennekes, H.; Lumley, J. L. (1972). A First Course in Turbulence. The MIT Press. ISBN 0262200198. OCLC 281992.
- Pope, Stephen B. (2000). Turbulent Flows. Cambridge University Press. ISBN 0521598869. OCLC 174790280 42296280 43540430 67711662.
{{cite book}}
: Check|oclc=
value (help)
External links
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- NASA Beginner's Guide to Aerodynamics
- Aerodynamics for Students
- Applied Aerodynamics: A Digital Textbook
- Aerodynamics for Pilots
- Aerodynamics and Race Car Tuning
- Aerodynamic Related Projects
- eFluids Bicycle Aerodynamics
- Application of Aerodynamics in Formula One (F1)
- Aerodynamics in Car Racing
- Aerodynamics of Birds
- Aerodynamics and dragonfly wings