RADIUS

For other uses, see Radius (disambiguation).

Remote Authentication Dial In User Service (RADIUS) is a networking protocol that provides centralized Authentication, Authorization, and Accounting (AAA) management for users that connect and use a network service. RADIUS was developed by Livingston Enterprises, Inc. in 1991 as an access server authentication and accounting protocol and later brought into the Internet Engineering Task Force (IETF) standards.

Because of the broad support and the ubiquitous nature of the RADIUS protocol, it is often used by ISPs and enterprises to manage access to the Internet or internal networks, wireless networks, and integrated e-mail services. These networks may incorporate modems, DSL, access points, VPNs, network ports, web servers, etc.

RADIUS is a client/server protocol that runs in the application layer, using UDP as transport. The Remote Access Server, the Virtual Private Network server, the Network switch with port-based authentication, and the Network Access Server (NAS), are all gateways that control access to the network, and all have a RADIUS client component that communicates with the RADIUS server. The RADIUS server is usually a background process running on a UNIX or Microsoft Windows server.

AAA

Main article: AAA protocol

RADIUS servers use the AAA concept to manage network access in the following two-step process, also known as an "AAA transaction". AAA stands for “authentication, authorization and accounting”. Authentication and Authorization characteristics in RADIUS are described in RFC 2865 while Accounting is described by RFC 2866.

Authentication and authorization

The user or machine sends a request to a Remote Access Server (RAS) to gain access to a particular network resource using access credentials. The credentials are passed to the RAS device via the link-layer protocol - for example, Point-to-Point Protocol (PPP) in the case of many dialup or DSL providers or posted in an HTTPS secure web form.

In turn, the RAS sends a RADIUS Access Request message to the RADIUS server, requesting authorization to grant access via the RADIUS protocol.

This request includes access credentials, typically in the form of username and password or security certificate provided by the user. Additionally, the request may contain other information which the RAS knows about the user, such as its network address or phone number, and information regarding the user's physical point of attachment to the RAS.

The RADIUS server checks that the information is correct using authentication schemes such as PAP, CHAP or EAP. The user's proof of identification is verified, along with, optionally, other information related to the request, such as the user's network address or phone number, account status, and specific network service access privileges. Historically, RADIUS servers checked the user's information against a locally stored flat file database. Modern RADIUS servers can do this, or can refer to external sources — commonly SQL, Kerberos, LDAP, or Active Directory servers — to verify the user's credentials.

RADIUS Authentication and Authorization Flow

The RADIUS server then returns one of three responses to the RAS : 1) Access Reject, 2) Access Challenge, or 3) Access Accept.

• Access Reject - The user is unconditionally denied access to all requested network resources. Reasons may include failure to provide proof of identification or an unknown or inactive user account.
• Access Challenge - Requests additional information from the user such as a secondary password, PIN, token, or card. Access Challenge is also used in more complex authentication dialogs where a secure tunnel is established between the user machine and the Radius Server in a way that the access credentials are hidden from the RAS.
• Access Accept - The user is granted access. Once the user is authenticated, the RADIUS server will often check that the user is authorized to use the network service requested. A given user may be allowed to use a company's wireless network, but not its VPN service, for example. Again, this information may be stored locally on the RADIUS server, or may be looked up in an external source such as LDAP or Active Directory.

Each of these three RADIUS responses may include a Reply-Message attribute which may give a reason for the rejection, the prompt for the challenge, or a welcome message for the accept. The text in the attribute can be passed on to the user in a return web page.

Authorization attributes are conveyed to the RAS stipulating terms of access to be granted. For example, the following authorization attributes may be included in an Access-Accept:

• The specific IP address to be assigned to the user
• The address pool from which the user's IP should be chosen
• The maximum length that the user may remain connected
• An access list, priority queue or other restrictions on a user's access
• L2TP parameters
• VLAN parameters
• Quality of Service (QoS) parameters

Accounting

RADIUS Accounting Flow

Accounting is described in RFC 2866.

When network access is granted to the user by the NAS, an Accounting Start (a RADIUS Accounting Request packet containing an Acct-Status-Type attribute with the value "start") is sent by the NAS to the RADIUS server to signal the start of the user's network access. "Start" records typically contain the user's identification, network address, point of attachment and a unique session identifier.

Periodically, Interim Update records (a RADIUS Accounting Request packet containing an Acct-Status-Type attribute with the value "interim-update") may be sent by the NAS to the RADIUS server, to update it on the status of an active session. "Interim" records typically convey the current session duration and information on current data usage.

Finally, when the user's network access is closed, the NAS issues a final Accounting Stop record (a RADIUS Accounting Request packet containing an Acct-Status-Type attribute with the value "stop") to the RADIUS server, providing information on the final usage in terms of time, packets transferred, data transferred, reason for disconnect and other information related to the user's network access.

Typically, the client sends Accounting-Request packets until it receives an Accounting-Response acknowledgement, using some retry interval.

The primary purpose of this data is that the user can be billed accordingly; the data is also commonly used for statistical purposes and for general network monitoring.

Roaming

Roaming using a proxy RADIUS AAA server.

RADIUS is commonly used to facilitate roaming between ISPs, for example:

• by companies which provide a single global set of credentials that are usable on many public networks;
• by independent, but collaborating, institutions issuing their own credentials to their own users, that allow a visitor from one to another to be authenticated by their home institution, such as in eduroam.

RADIUS facilitates this by the use of realms, which identify where the RADIUS server should forward the AAA requests for processing.

Realms

A realm is commonly appended to a user's user name and delimited with an '@' sign, resembling an email address domain name. This is known as postfix notation for the realm. Another common usage is prefix notation, which involves prepending the realm to the username and using '\' as a delimiter. Modern RADIUS servers allow any character to be used as a realm delimiter, although in practice '@' and '\' are usually used.

Realms can also be compounded using both prefix and postfix notation, to allow for complicated roaming scenarios; for example, somedomain.com\username@anotherdomain.com could be a valid username with two realms.

Although realms often resemble domains, it is important to note that realms are in fact arbitrary text and need not contain real domain names. Realm formats are standardized in RFC 4282, which defines a Network Access Identifier (NAI) in the form of 'user@realm'. In that specification, the 'realm' portion is required to be a domain name. However, this practice is not always followed.

Proxy operations

When a RADIUS server receives an AAA request for a user name containing a realm, the server will reference a table of configured realms. If the realm is known, the server will then proxy the request to the configured home server for that domain. The behavior of the proxying server regarding the removal of the realm from the request ("stripping") is configuration-dependent on most servers. In addition, the proxying server can be configured to add, remove or rewrite AAA requests when they are proxied over time again.

Security

Roaming with RADIUS exposes the users to various security and privacy concerns. More generally, some roaming partners establish a secure tunnel between the RADIUS servers to ensure that users' credentials cannot be intercepted while being proxied across the internet. This is a concern as the MD5 hash built into RADIUS is considered insecure.

Packet structure

RADIUS packet data format.

The RADIUS packet data format is shown to the right. The fields are transmitted from left to right, starting with the code, the identifier, the length, the authenticator and the attributes.

RADIUS Codes (decimal) are assigned as follows:

Code	Assignment
1	Access-Request
2	Access-Accept
3	Access-Reject
4	Accounting-Request
5	Accounting-Response
11	Access-Challenge
12	Status-Server (experimental)
13	Status-Client (experimental)
255	Reserved

The Identifier field aids in matching requests and replies.

The Length field indicates the length of the entire RADIUS packet including the Code, Identifier, Length, Authenticator and optional Attribute fields.

The Authenticator is used to authenticate the reply from the RADIUS server, and is used in encrypting passwords; its length is 16 bytes.

Attribute value pairs

RADIUS AVP layout.

The RADIUS Attribute Value Pairs (AVP) carry data in both the request and the response for the authentication, authorization, and accounting transactions. The length of the radius packet is used to determine the end of the AVPs.

AVP Type	Assignment
1	User-Name
2	User-Password
3	CHAP-Password
4	NAS-IP-Address
5	NAS-Port
6	Service-Type
7	Framed-Protocol
8	Framed-IP-Address
9	Framed-IP-Netmask
10	Framed-Routing
11	Filter-Id
12	Framed-MTU
13	Framed-Compression
14	Login-IP-Host
15	Login-Service
16	Login-TCP-Port
17	(unassigned)
18	Reply-Message
19	Callback-Number
20	Callback-Id
21	(unassigned)
22	Framed-Route
23	Framed-IPX-Network
24	State
25	Class
26	Vendor-Specific
27	Session-Timeout
28	Idle-Timeout
29	Termination-Action
30	Called-Station-Id
31	Calling-Station-Id
32	NAS-Identifier
33	Proxy-State
34	Login-LAT-Service
35	Login-LAT-Node
36	Login-LAT-Group
37	Framed-AppleTalk-Link
38	Framed-AppleTalk-Network
39	Framed-AppleTalk-Zone
40	Acct-Status-Type
41	Acct-Delay-Time
42	Acct-Input-Octets
43	Acct-Output-Octets
44	Acct-Session-Id
45	Acct-Authentic
46	Acct-Session-Time
47	Acct-Input-Packets
48	Acct-Output-Packets
49	Acct-Terminate-Cause
50	Acct-Multi-Session-Id
51	Acct-Link-Count
52-59	(reserved for accounting)
60	CHAP-Challenge
61	NAS-Port-Type
62	Port-Limit
63	Login-LAT-Port

Vendor-specific attributes

RADIUS is extensible; many vendors of RADIUS hardware and software implement their own variants using Vendor-Specific Attributes (VSAs). Microsoft has published some of their VSAs. VSA definitions from many other companies remain proprietary and/or ad-hoc, nonetheless many VSA dictionaries can be found downloading source code of open source RADIUS implementations, for example FreeRADIUS or openRADIUS

UDP port numbers

RADIUS has been officially assigned UDP ports 1812 for RADIUS Authentication and 1813 for RADIUS Accounting by the Internet Assigned Numbers Authority (IANA). However, prior to IANA allocation of ports 1812 and 1813, ports 1645 and 1646 (authentication and accounting, respectively) were used unofficially and became the default ports assigned by many RADIUS Client/Server implementations of the time. The tradition of using 1645 and 1646 for backwards compatibility continues to this day. For this reason many RADIUS Server implementations monitor both sets of UDP ports for RADIUS requests.

Security

The RADIUS protocol does not transmit passwords in cleartext between the NAS and RADIUS server (not even with PAP protocol). Rather, a shared secret is used along with the MD5 hashing algorithm to obfuscate passwords. Because this particular implementation is not considered to be a very strong protection of the user's credentials, additional protection, such as IPsec tunnels or physically secured data-center networks, should be used to further protect the RADIUS traffic between the NAS device and the RADIUS server. Additionally, the user's security credentials are the only part protected by RADIUS itself, yet other user-specific attributes such as tunnel-group IDs or vlan memberships passed over RADIUS may be considered sensitive (helpful to an attacker) or private (sufficient to identify the individual client) information as well. The RadSec protocol claims to solve aforementioned security issues.

RADIUS history

RADIUS was originally specified in an RFI by Merit Network in 1991 to control dial-in access to NSFnet. Livingston Enterprises responded to the RFI with a description of a RADIUS server. Merit Network awarded the contract to Livingston Enterprises that delivered their PortMaster series of Network Access Servers and the initial RADIUS server to Merit. RADIUS was later (1997) published as RFC 2058 and RFC 2059 (current versions are RFC 2865 and RFC 2866).

Now, several commercial and open-source RADIUS servers exist. Features can vary, but most can look up the users in text files, LDAP servers, various databases, etc. Accounting records can be written to text files, various databases, forwarded to external servers, etc. SNMP is often used for remote monitoring and keep-alive checking of a RADIUS server. RADIUS proxy servers are used for centralized administration and can rewrite RADIUS packets on the fly (for security reasons, or to convert between vendor dialects).

The Diameter protocol was intended as the replacement for RADIUS. While both are Authentication, Authorization, and Accounting (AAA) protocols, the use-cases for the two protocols have since diverged. Diameter is largely used in the 3G space. RADIUS is used elsewhere. One of the largest barriers to having Diameter replace RADIUS is that switches and Access Points typically implement RADIUS, but not Diameter.

Diameter uses SCTP or TCP while RADIUS typically uses UDP as the transport layer. As of 2012, RADIUS can also use TCP as the transport layer with TLS for security.

RFCs

The RADIUS protocol is currently defined in the following IETF RFCs: Obsolete RFCs are indicated with strikethrough text.

RFC	Title	Date published	Related article	Related RFCs	Notes
RFC 2058	Remote Authentication Dial In User Service (RADIUS)	January 1997	RADIUS	Obsoleted by RFC 2138
RFC 2059	RADIUS Accounting	January 1997	RADIUS	Obsoleted by RFC 2139
RFC 2138	Remote Authentication Dial In User Service (RADIUS)	April 1997	RADIUS	Obsoleted by RFC 2865
RFC 2139	RADIUS Accounting	April 1997	RADIUS	Obsoleted by RFC 2866
RFC 2548	Microsoft Vendor-specific RADIUS Attributes	March 1999	RADIUS
RFC 2607	Proxy Chaining and Policy Implementation in Roaming	June 1999
RFC 2618	RADIUS Authentication Client MIB		Management information base	Obsoleted by RFC 4668
RFC 2619	RADIUS Authentication Server MIB		Management information base	Obsoleted by RFC 4669
RFC 2620	RADIUS Accounting Client MIB	June 1999	Management information base	Obsoleted by RFC 4670
RFC 2621	RADIUS Accounting Server MIB	June 1999	Management information base	Obsoleted by RFC 4671
RFC 2809	Implementation of L2TP Compulsory Tunneling via RADIUS	April 2000
RFC 2865	Remote Authentication Dial In User Service (RADIUS)	June 2000	RADIUS	Updated by RFC 2868, RFC 3575, RFC 5080	This standard describes RADIUS authentication and authorization between a Network Access Server (NAS) and a shared RADIUS authentication server. This protocol is also used to carry configuration information from the RADIUS server to the NAS.
RFC 2866	RADIUS Accounting	June 2000	RADIUS		This standard describes how accounting information is carried from the NAS to a shared RADIUS accounting server.
RFC 2867	RADIUS Accounting Modifications for Tunnel Protocol Support	June 2000	RADIUS	Updates RFC 2866
RFC 2868	RADIUS Attributes for Tunnel Protocol Support	June 2000		Updates RFC 2865
RFC 2869	RADIUS Extensions	June 2000		Updated by RFC 3579, RFC 5080
RFC 2882	Network Access Servers Requirements: Extended RADIUS Practices	July 2000
RFC 3162	RADIUS and IPv6	August 2001
RFC 3575	IANA Considerations for RADIUS	July 2003
RFC 3576	Dynamic Authorization Extensions to RADIUS	July 2003		Obsoleted by RFC 5176
RFC 3579	RADIUS Support for EAP	September 2003	Extensible Authentication Protocol	Updates RFC 2869
RFC 3580	IEEE 802.1X RADIUS Usage Guidelines	September 2003	802.1X
RFC 4014	RADIUS Attributes Suboption for the DHCP Relay Agent Information Option	February 2005
RFC 4372	Chargeable User Identity	January 2006
RFC 4590	RADIUS Extension for Digest Authentication	July 2006		Obsoleted by RFC 5090
RFC 4668	RADIUS Authentication Client MIB for IPv6	August 2006	Management information base
RFC 4669	RADIUS Authentication Server MIB for IPv6	August 2006	Management information base
RFC 4670	RADIUS Accounting Client MIB for IPv6	August 2006	Management information base
RFC 4671	RADIUS Accounting Server MIB for IPv6	August 2006	Management information base
RFC 4675	RADIUS Attributes for Virtual LAN and Priority Support	September 2006
RFC 4679	DSL Forum Vendor-Specific RADIUS Attributes	September 2006
RFC 4818	RADIUS Delegated-IPv6-Prefix Attribute	April 2007
RFC 4849	RADIUS Filter Rule Attribute	April 2007
RFC 5080	Common RADIUS Implementation Issues and Suggested Fixes	December 2007		Updates RFC 3579
RFC 5090	RADIUS Extension for Digest Authentication	February 2008
RFC 5176	Dynamic Authorization Extensions to RADIUS	January 2008
RFC 5607	RADIUS Authorization for NAS Management	July 2009
RFC 5997	Use of Status-Server Packets in the RADIUS Protocol	August 2010		Updates RFC 2866
RFC 6158	RADIUS Design Guidelines	March 2011
RFC 6613	RADIUS over TCP	May 2012
RFC 6614	Transport Layer Security (TLS) Encryption for RADIUS	May 2012

See also

• 802.1X
• Diameter (protocol)
• Kerberos (protocol)
• Security Assertion Markup Language
• TACACS
• TACACS+

Bibliography

• Hassell, Jonathan (2002). RADIUS - Securing Public Access to Private Resources. O'Reilly & Associates. ISBN 0-596-00322-6. Retrieved 2009-04-17.

External links

• An Analysis of the RADIUS Authentication Protocol
• Decoding a Sniffer-trace of RADIUS Transaction
• using Wireshark to debug RADIUS