Magnetic pulse welding: Difference between revisions

Content deleted Content added

Inline

Revision as of 12:06, 5 August 2015

Magnetic pulse welding (MPW) is a solid state welding process that uses magnetic forces to weld two workpieces together. The welding mechanism is most similar to that of explosion welding.^[1] Magnetic pulse welding started in the early 1970s, when the automotive industry began to use solid state welding. The biggest advantage using magnetic pulse welding is that the formation of brittle intermetallic phases is avoided. Therefore, dissimilar metals can be welded, which cannot be joined by fusion welding. With magnetic pulse welding high quality welds in similar and dissimilar metals can be made in microseconds without the need for shielding gases or welding consumables.

Process

Magnetic pulse welding is based on a very short electromagnetic pulse (<100µs), which is obtained by a fast discharge of capacitors through low inductance switches into a coil. The pulsed current with a very high amplitude and frequency (500kA and 15 kHz) produces a high-density magnetic field, which creates an eddy current in one of the work pieces. Repulsive Lorentz forces are created and a high magnetic pressure well beyond the material yield strength causing acceleration and one of the work pieces impacts onto the other part with a collision velocity up to 500 m/s.^[2]

During magnetic pulse welding a high plastic deformation is developed along with high shear strain and oxide disruption thanks to the jet and high temperatures near the collision zone. This leads to solid state weld due to the microstructure refinement, dislocation cells, slip bends, micro twins and local recrystallization.^[3]

Principles

In order to get a strong weld, several conditions have to be reached:^[4]

Jetting condition: the collision has to be subsonic compare to the local materials speed of sound to generate a jet.
High pressure regime: the impact velocity has to be sufficient to obain a hydrodynamic regime, otherwise the parts will only crimped or formed.
No fusion during the collision: If the pressure is too high, the materials can locally melt and re-solidify. This can cause a weak weld.

The main difference between magnetic pulse welding and explosive welding is that the collision angle and the velocity are almost constant during the explosive welding process, while in magnetic pulse welding they continuously vary.

Advantages of MPW

Allows welding on designs which with other ways are not possible.
High-speed pulse lasts from 10 to 100µs, the only time limitation is loading and unloading.
High repeatability.
Suited to mass-production: typically 1-5 million welds per year.
Dissimilar metals welding is possible.
Cold weld with no heat-affected zone.
No need for filler materials.
Green process: no smoke, no radiation and no disposals.
High quality clean interface.
Mechanical strength of the joint is stronger than that of the parent material.
High precision obtainable by adjustment of magnetic field.
No distortion.
No corrosion development in the welding area.

References

^ Weman, Klas (2003), Welding processes handbook, CRC Press, pp. 91–92, ISBN 978-0-8493-1773-6.
^ Magnetic Pulse Welding Illustration
^ A. Stern, V. Shribman, A. Ben-Artzy, and M. Aizenshtein, Interface Phenomena and Bonding Mechanism in Magnetic Pulse Welding, Journal of Materials Engineering and Performance, 2014.
^ Magnetic Pulse Welding: J.P. Cuq-Lelandais, S. Ferreira, G. Avrillaud, G. Mazars, B. Rauffet: Welding windows and high velocity impact simulations.

External links

[1] Weman, Klas (2003), Welding processes handbook, CRC Press, pp. 91–92, ISBN 978-0-8493-1773-6.

[2] Magnetic Pulse Welding Illustration

[3] A. Stern, V. Shribman, A. Ben-Artzy, and M. Aizenshtein, Interface Phenomena and Bonding Mechanism in Magnetic Pulse Welding, Journal of Materials Engineering and Performance, 2014.

[4] Magnetic Pulse Welding: J.P. Cuq-Lelandais, S. Ferreira, G. Avrillaud, G. Mazars, B. Rauffet: Welding windows and high velocity impact simulations.

[1]

[2]

[3]

[4]

@@ Line 2: / Line 2: @@
 '''Magnetic pulse welding''' ('''MPW''') is a solid state [[welding]] process that uses [[magnetic]] forces to weld two workpieces together. The welding mechanism is most similar to that of [[explosion welding]].<ref>{{Citation | last = Weman | first = Klas | title = Welding processes handbook | pages = 91–92 | publisher = CRC Press | year = 2003 | url = http://books.google.com/books?id=yIJm5uL9_sAC&pg=PA91 | isbn = 978-0-8493-1773-6 | postscript =.}}</ref>
-Magnetic pulse welding was known since the early 1970s, when the automotive industry began to use solid state welding. The biggest advantage using magnetic pulse welding is that the formation of brittle intermetallic phases is avoided. Therefore, dissimilar metals can be welded, which cannot be joined by fusion welding. With magnetic pulse welding high quality welds in similar and dissimilar metals can be made in microseconds without the need for shielding gases or welding consumables.
+Magnetic pulse welding started in the early 1970s, when the automotive industry began to use solid state welding. The biggest advantage using magnetic pulse welding is that the formation of brittle intermetallic phases is avoided. Therefore, dissimilar metals can be welded, which cannot be joined by fusion welding. With magnetic pulse welding high quality welds in similar and dissimilar metals can be made in microseconds without the need for shielding gases or welding consumables.
 ==Process==