GG45
 | This article needs additional citations for verification. (October 2008) |
GG45 (GigaGate 45) or ARJ45 (Augmented RJ45) is a connector for high-speed Category 7 cable local area network (LAN) cabling, originally developed by Nexans. GG45 provides limited backwards compatibility for standard 8P8C connectors (often colloquially called RJ45). It has been standarized by the International Electrotechnical Commission (IEC) as IEC 61076-3-110.[1]
Details
The GG45/ARJ45 connector operates in the frequency spectrum between 600 MHz to 5 GHz with shielded twisted pair and twinax cables. To reduce crosstalk, two of the four pairs have been moved so that each pair occupies one corner. A protrusion on the socket is designed to activate a switch on the jack for the alternative contact positions. Combined with an internal system of Faraday cages, the GG45 interface therefore has plenty of headroom, plus the ability to migrate to higher speed service by upgrading to Category 7A patch cords that activate the switch in the jack.[2]
There are two main variants of GG45/ARJ45:
- GG45 or ARJ45 HD is the full connector with 12 contacts, providing a Category 6 cable interface (100/250 MHz) for older devices as well as the new interface.
- ARJ45 HS is the version without the Cat 6-compatible contacts, for a total of 8 contacts.
1 2 3 4 5 6 7 8 |‾‾█‾█‾█‾█‾█‾█‾█‾█‾‾| Pinout of GG45 and ARJ45 HD sockets. The protrusion ▒▒▒ | | activates a switch, redirecting the 3-6 and 4-5 pairs to |_█_█____▒▒▒____█_█_| the corners on a GG45 jack. 3'6' | | 4'5' |_| ARJ45 HS omits the Cat 6 compatible 3-6 and 4-5 pairs.
See also
- TERA – a connector for high-speed Category 7 cable
References
- ^ IEC Webstore: International standard IEC 61076-3-110 Connectors for electronic equipment - Product requirements - Part 3-110: Rectangular connectors — Detail specification for shielded, free and fixed connectors for data transmissions with frequencies up to 1000MHz, Edition 1.0, December 2007; ( (in English and French) "Preview" (PDF). (217 KB))
- ^ "Twisted-pair connectors continue technological evolution". November 1, 2008. Archived from the original on 2011-07-08., section A step further
External links
- "Stewart Connector's New ARJ45 Connector Series Meets Proposed Category 7a Standards as Defined by IEC" (Press release). November 13, 2006. Archived from the original on 2007-05-28.
- Ziobron, Betsy (November 1, 2008). "Twisted-pair connectors continue technological evolution". Cabling Installation & Maintenance. Retrieved 2009-10-19.