Talk:Flux

Physics C‑class High‑importance

	Physics portal This article is within the scope of WikiProject Physics, a collaborative effort to improve the coverage of Physics on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.PhysicsWikipedia:WikiProject PhysicsTemplate:WikiProject Physicsphysics articles
C	This article has been rated as C-class on Wikipedia's content assessment scale.
High	This article has been rated as High-importance on the project's importance scale.

Archives

Archive 1 (2005–2014)

Starting a rewrite (July 8 2016)

I started a full rewrite of the article. I cannot say I am really satisfied with the current result, and I would like to apologize for that - I thought I could get it done without using the sandbox, but I saw too big. Do share any opposition to the general philosophy of how the contents are dealt with though, even if the article will badly need a copyedit (but the former version was worse in that respect). Tigraan^{Click here to contact me} 16:49, 8 July 2016 (UTC)[reply]

the previous page was fine. further, your english isn't sufficient to start making huge edits like this. wikipedia is not an editing service. i understand you want to contribute, but i am very suspicious about what motivated this "edit".

@David Eppstein, Michael Hardy, D.Lazard, and Favonian: what do you think of this new "revision"? i find the figure far inferior and less informative than the old one (among other things). also, i find it suspicious because someone from india (User:G41rn8) randomly set the "expert needed" tag, to which someone else from india (User:Tigraan) miraculously answered, deleted a bunch of things and expected us to edit his work.

one glaring, and obvious example of the poor quality of this "revised" page is when you compare the old figure:

to the new one:

this should have been taken to sandbox and i am going to revert. 174.3.155.181 (talk) 22:40, 10 July 2016 (UTC)[reply]

Do revert if you want, I agree I should have gone through the sandbox and the end result was meh. However, the former article was far from "fine", and the figure change is a clear net positive in my view (not so much the figure itself, but the incomprehensible caption). Keep in my that "flux" is likely to attract readers who do not even know what a cosine is (unlike, say, Bessel's correction where we can assume readers to have some technical background).

As for the WP:SOCK accusation, maybe a quick look at either my user page ("from India", really?) or my contributions would tell you something. I would appreciate if you retracted that, or alternatively took me to WP:SPI if you stand by your implied accusation. Tigraan^{Click here to contact me} 18:51, 11 July 2016 (UTC)[reply]

Leave it as it is right now. I have reviewed both versions and although many of User:Tigraan's edits are good, many are also poor. I would suggest leaving it as it is now, and then (as we normally do in wikipedia) make small edits that other editors can comment on or improve before moving on to another section. This works best for everyone. I think User:Tigraan has already commented that he/she should have done it this way or sandboxed a big project like this, so lesson learned. StarHOG (talk) 15:19, 20 July 2016 (UTC)[reply]

Apologies for the bad diagram (it was mine). I like the newer one by user:Debenben also, feel free to replace. In the mean time I have fixed my old one with a new caption. M ∧Ŝ c²ħε И_τlk 20:02, 20 July 2016 (UTC)[reply]

I agree, that File:General flux diagram.svg is more informative. I created the new one for the German article because it fits better with the notation used in the text, i.e.

in the German article, the surface element is called $\mathrm {d} {\vec {A}}$ , (this article uses $\mathrm {d} \mathbf {A}$ , the figure shows a scalar quantity $dS$ )
quantities that are not refered to in the text (at the moment $\mathbf {F} _{\parallel },\mathbf {F} _{\perp }$ ) are not shown in order to keep it simple and avoid confusion.

In case you want to change File:General flux diagram.svg again, keep in mind it is used in other wikis, too.--Debenben (talk) 20:53, 20 July 2016 (UTC)[reply]

Sorry for late reply. I must have misunderstood completely what the preference in diagrams was, people favored the old one after all. Thanks also for the clarification and heads up Debenben. M ∧Ŝ c²ħε И_τlk 07:15, 23 July 2016 (UTC)[reply]

Misleading Sentence Under "Transport Fluxes"

> Also acts as a generalization of heat flux, which is equal to the radiative flux when restricted to the infrared spectrum.

Should read "Also acts as a generalization of heat flux, which is equal to the radiative flux when restricted to electromagnetic radiation" or similar. You should not imply that only infrared transports heat. 174.124.85.209 (talk) 11:39, 7 October 2017 (UTC)[reply]

Done, but I believe the page is not protected, so you're welcome to edit the page yourself. Gap9551 (talk) 14:08, 7 October 2017 (UTC)[reply]

The terminology section is nearly impossible to follow

It refers to the "first definition" and appears to give two definitions in that sentence. Is the second half of the sentence a different definition? It says "vector field / function of position"; what does it mean to divide a vector field by a function of position?

Are these the two definitions?

First definition: flux is a single vector Second definition: flux is a vector field

The third sentence seems to contradict the second sentence.

The descriptions in the last paragraph are ambiguous. I think the only way someone would understand what is being said is if they already understood the definitions of the various terms.

A step in the right direction would be to clearly identify the two definitions. In the last paragraph, it would make sense to omit the word "flux" when referring to the definitions. Can someone who understands this clean it up?

128.174.126.83 (talk) 18:11, 6 February 2018 (UTC)[reply]

I only changed the names "first definition" and "second definition" for "transport definition" and "electromagnetism definition", respectively, while respecting the original claim regarding the literature. I did check a bit the literature and it seems that the claim is correct that flux is some times used as a quantity that can be integrated over a surface and other times as the result of this integration. Dominic Mayers (talk) 20:37, 27 February 2019 (UTC)[reply]

Section: Flux as a Surface Integral

The "Flux as a surface integral" section and the accompanying image are confusing. Third row of image says "flux is proportional to area within boundary", in which flux is apparently meant as the surface integral and corresponds to rate/vector field in the transport definition. In the body text this image is referred to by: "See also the image at right: the number of red arrows passing through a unit area is the flux density", which I would assume be flux in transport terminology. Two paragraphs above this we have "Conversely, one can consider the flux the more fundamental quantity and call the vector field the flux density." in which the vector field would again be the conserved quantity. It would really be helpful to distinguish between the vector field, flux and flux density first.

Totally aside, I believe the concept of flux was introduced by Fourier long before Maxwell. Will look up references and add them if I can.

--144.122.162.45 (talk) 08:58, 23 June 2018 (UTC)[reply]

It seems that the section terminology addresses your point. It seems on purpose that we do not have a consistent definition of flux (and of flux density) throughout the article. Dominic Mayers (talk) 20:46, 27 February 2019 (UTC)[reply]

In laymen's terms: Flux density is the amount of flux per unit area. Similar to current density. Total flux describes the total amount of whatever the metric is referring to; heat, magnetic, photon, ect, but when it's described in terms of a per unit area (typically about the plane that runs perpendicular to the vector field, or whatever plane you are attempting to describe flux about, the plane doesn't always have to be perpendicular to the vector field), then it becomes flux density. — Preceding unsigned comment added by 64.179.179.8 (talk) 12:34, 28 February 2021 (UTC)[reply]

Flux vs. flux density

Speaking as a physicist in general, and a transport theorist in particular, I agree with the header that says this article is mixing up flux and flux density. As such I think this article is likely to confuse a lot of novice readers (e.g. physics students). The unfortunate thing is that many authors use the two terms interchangeably, and so it isn't so surprising that this article mixes them up. I don't have the time at the moment to try doing a rewrite of this article, but maybe I'll come back to this in a month or so after all my final exams are marked and have a go at it. The distinction made by the previous poster (28 Feb.) is what I think most experts would agree with.

A further criticism is that the statements in the introductory paragraph about whether flux is a vector or scalar an not correct. It is difficult to make a general statement about this because fluxes and flux densities of different types of quantities can be all sorts of different types of mathematical objects depending on the quantity being "transported". For example, in transport theory, momentum flux density is a 2nd rank tensor, and so momentum flux is a vector, but energy flux density is a vector and so energy is a scalar. In general (is this *fully* general? Ask a mathematician not a physicist like me...) if we have any flux density, q, then the associated flux will be whatever sort of quantity results from taking an inner product between q and a vector. — Preceding unsigned comment added by Gleedadswell (talk • contribs) 15:07, 20 March 2021 (UTC)[reply]

@Gleedadswell: It would be great if you could find the time to do your proposed rewrite to clear up the confusion between flux and flux density and also to deal with the case where the flux density is a tensor. Many thanks in advance. Gustav (talk) 15:21, 25 April 2021 (UTC)[reply]

Agree with Gleedadswell, 144.122.162.45, 64.179.179.8. A 'flux' is the surface integral of a 'flux density', so it is the dot product with the surface normal. If the 'flux density' is a vector, such as magnetic field, electric field, current density, Poynting vector, fluid velocity, etc., the flux is a scalar. If the flux density is a 2nd rank tensor, the flux is a vector. --Chetvorno^TALK 16:57, 25 April 2021 (UTC)[reply]

@Gleedadswell: I agree with you. This page is totally confusing. I think the problem concern more articles and this lead a lot of misunderstandings. I have these 3 definitions that should be checked, which if correct, would solve the problems a bit and would be a start:

Flux or Rate: Quantity of objects that cross a surface in a unit of time $\phi ={\frac {dN}{dt}}$
Fluence: Quantity of objects that cross a unit of surface $j={\frac {dN}{dA}}$
Flux density or Fluence Rate: Quantity of objects that cross a unit of surface in a unit of time $\Phi ={\frac {dN}{dtdA}}={\frac {d\phi }{dA}}={\frac {dj}{dt}}$ Agador88 (talk) 11:07, 30 May 2021 (UTC)[reply]

Flux density refers to the rate of change in some quantity with respect to area, flux refers to the total change in some quantity over a given area found either by multiplying the area by the flux density, or by integrating the flux density with respect to area. Flux density is to flux as velocity is to distance.

Wiki Education assignment: Plant Behavior 2022

This article was the subject of a Wiki Education Foundation-supported course assignment, between 28 March 2022 and 10 June 2022. Further details are available on the course page. Student editor(s): Kay Kang 1 (article contribs).

— Assignment last updated by Noosa.N (talk) 04:00, 1 June 2022 (UTC)[reply]

@Noosa.N: You might like to confirm what article is intended as Flux is a physics topic. Johnuniq (talk) 04:34, 1 June 2022 (UTC)[reply]