Talk:EMD 710

Trains Portal

This article is within the scope of WikiProject Trains, an attempt to build a comprehensive and detailed guide to rail transport on Wikipedia. If you would like to participate, you can visit the project page, where you can join the project and/or contribute to the discussion. See also: WikiProject Trains to do list and the Trains Portal.TrainsWikipedia:WikiProject TrainsTemplate:WikiProject Trainsrail transport articles

High

This article has been rated as High-importance on the project's importance scale.

Associated projects or task forces:
/
	This article is supported by the Locomotives task force.

This article lacks sufficient references and/or adequate inline citations.

Technology

This article is within the scope of WikiProject Technology, a collaborative effort to improve the coverage of technology on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.TechnologyWikipedia:WikiProject TechnologyTemplate:WikiProject TechnologyTechnology articles

Factual accuracy

Someone who is extremely knowledgeable about the specific engine model numbers needs to verify this. I put the table together as best I could piece everything together from the sites I referenced and put in the See Also section, but a lot of data out there conflicts--specifically, the difference between the 16-710G3B and 16-710G3C engines and the T1 and T2 suffixes. I've also seen reference that the SD70MACs have a 16-710G3C-ES, 4000 HP engine, which contradicts what I've come up with in the table (namely that the G3Bs are 4000 HP and the G3Cs are 4300 HP). Needs an expert--maybe I'll tag the article with that template...

cluth 03:46, 9 September 2006 (UTC)[reply]

T1 and T2 refer to the EPA's emissions regulations. B and C are fuel economy engines, and I would assume that C has better fuel economy, but I am not sure.

Never mind, I see you mean the specification differences, not the meaning of the notations Dav2008 17:49, 9 August 2007 (UTC)[reply]

I just saw another reference to the 16-710G3C-ES, 4000 HP engine used in the SD70MAC (but not the SD70M). It's in a 2003-produced DVD issued by Trains Magazine on motive power. Still not sure how that fits into the specs table. It also makes a reference to the initial engine used in the convertible SD90MACs as the 16-710G3-ES with 4,300 HP. cluth 20:37, 1 October 2007 (UTC)[reply]

B & C where ADVERTISED as 'Fuel Economy Engines', but ADVERTS are rarely factual. B typically have 200+ish BHP more over A, C gets an 200BHP above B by increasing the rpms to 950rpm. However, a customer could have them set to whatever they want. There is also confusion about BHP & THP. Tubby.Lunchbox (talk) 14:28, 26 February 2023 (UTC)[reply]

Table and Info Upgrades

I cant say Im a expert, but I do have access to some EMD publications which I used to upgrade the table.

Dont have Max RPM for the 710G3C series or the V12's of any series, I know they are differnt then the G3B's 900 RPM but unfortunately dont have that info handy.

chesapeake 23-09-06

• V8 & V12 Loco 710's are 900/904rpm MUI/EFI, V16 are 900/904/950, V20 are 904 but the 80MAC was a sales flop with only China & India using them. • 8-710G3A = 2000BHP @ 900rpm • 8-710G3B & C variants = 2200BHP @ 900rpm - Progress Rail • 12-710G3A = 3030BHP @ 900rpm • 12-710G3B & C 3200BHP @ 900rpm - Progress Rail • 16-710G3A = 4060BHP @ 900rpm - I have an EXCELLENT link for that, the BHP figure of 4060 gives best BSFC, but it can be set to 3800 if need be. • 16-710G3B = 4300BHP @ 900rpm • 16-710G3C = 4500BHP @ 900rpm - Progress Rail • 20-710G3A = 5000BHP @ 900rpm - SD80MAC Adverts • 20-710G3C = 5500BHP @ 900rpm - Progress Rail

Tubby.Lunchbox (talk) 14:54, 26 February 2023 (UTC)[reply]

Mass

Personally I'd like to know the mass (if not for the table then a few examples)

I also made the table sortable, so you can arrange by power/cylinders/date etc.213.249.232.187 (talk) 14:09, 5 March 2009 (UTC)[reply]

710G3B/GC3 series:8-cyl-10,523kg 23,200lb. 12-cyl-14,855kg 32,750lb 16-cyl-17,962kg 39,600lb 20-cyl=21,047kg 46,400lb.Suckindiesel (talk) 16:56, 20 March 2012 (UTC)[reply]

Roots supercharger and turbocharger are both forced induction

Please read the fourth and fifth sentence of Two-stroke diesel engine. There is more information at:Naturally aspirated, Forced induction, Roots-type supercharger, Turbocharger, and HowStuffWorks

What's your point? Tubby.Lunchbox (talk) 15:00, 26 February 2023 (UTC)[reply]

Math Checking

Note at the line: The 710 model was introduced in 1985 and has a 1-inch (25 mm) longer stroke (now 11 in or 279 mm) than the 645 (9.0625 in or 230 mm bore). Comparing the longer stroke of the 710 to the bore of the 645 doesn't give a useful comparison of stroke length difference or bore difference, and if the bore dimensions of the 645 are actually the stroke dimensions mislabeled, the 710 has roughly a 2" longer stroke. Someone with access to 710 and 645 documentation will need to double check that. — Preceding unsigned comment added by 71.193.23.181 (talk) 20:35, 15 May 2015 (UTC)[reply]

Two or Four Stroke?

The article states that it is a two stroke engine, but the box states that it has four valves per cylinder. What? If it's some sort of unusual engine I think that needs to be explained. Chris.Bristol (talk) 16:54, 12 November 2017 (UTC)[reply]

It has four exhaust values, what's hard to understand about that? The earlier engines in the series had 3 exhaust valves per cylinder.Sturmovik (talk) 13:11, 13 November 2017 (UTC)[reply]