Jump to content

SCOBY

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Bochulm (talk | contribs) at 19:44, 17 May 2024 (→Use in Circuit Boards). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A SCOBY used for brewing kombucha.
Kombucha co-culture with SCOBY biofilm

Symbiotic culture of bacteria and yeast (SCOBY) is a culinary symbiotic fermentation culture (starter) consisting of lactic acid bacteria (LAB), acetic acid bacteria (AAB), and yeast which arises in the preparation of sour foods and beverages such as kombucha.[1] Beer and wine also undergo fermentation with yeast, but the lactic acid bacteria and acetic acid bacteria components unique to SCOBY are usually viewed as a source of spoilage rather than a desired addition.[2][3] Both LAB and AAB enter on the surface of barley and malt in beer fermentation and grapes in wine fermentation; LAB lowers the pH of the beer/wine while AAB takes the ethanol produced from the yeast and oxidizes it further into vinegar, resulting in a sour taste and smell.[2][3] AAB are also responsible for the formation of the cellulose SCOBY.[1]

In its most common form, SCOBY is a gelatinous, cellulose-based biofilm or microbial mat found floating at the container's air-liquid interface. This bacterial cellulose mat is sometimes called a pellicle.[4] SCOBY pellicles, like sourdough starters, can serve the purpose of continuing the fermentation process into a new vessel and reproducing the desired product.[4] This can be attributed to SCOBY's ability to house not only the symbiotic growth, but a small amount of the previous media and product due to its ability to absorb water.[1] SCOBYs can vary greatly in cell density within the biofilm due to fermentation conditions, leading to possible variations in the end product; numerous studies are currently taking place to determine the optimal ratio of SCOBY, if any, to liquid culture to ensure highest product consistency, as there are no standard operating procedures in place.[4] Further information such as the organisms and culture conditions necessary to ferment and form a SCOBY, biofilm characteristics, and applications in foods and beverages with specific emphasis in kombucha can be found below.[5]

Co-culture composition and conditions

Based on the desired product of the SCOBY, different species of bacteria and yeast are used. Such cultures generally include aerobic, gram negative AAB species such as Acetobacter, Gluconobacter and Komagataeibacter, aerobic, gram positive LAB such as Lactobacillus, as well as various yeasts such as Saccharomyces and Zygosaccharomyces.[1][2] Strains are pre-screened for viability under compatible conditions, increased yield of desired product, and indisposition to compete; once chosen, various culture conditions are modified for optimal growth and productivity.[6]

For kombucha SCOBYs, the first step is yeast fermentation of sugars such as glucose from black or green tea into ethanol and carbon dioxide.[7] Zygosaccharomyces is reported to be involved in 84.1% of all kombucha SCOBY fermentation processes due to its improved stability in high sugar and halophilic conditions, while Saccharomyces is predominantly used for its efficient fermentation rates and resistance to high temperature and alcohol content.[1] Different variations of yeast can also be added as either a supplemental means to introduce different flavors and aromas or ensure reaction completion by utilizing different niches.[1] While these niches vary yeast to yeast, certain fermentation conditions remain consistent. Such conditions include but are not limited to high substrate concentration, sufficient oxygen levels, temperatures between 20 °C and 30 °C, and a pH between 4-4.5.[8]

The second step in the formation of SCOBY is the introduction of different bacteria into the liquid culture to convert the ethanol product of fermentation into organic acids such as lactic acid or acetic acid. These processes are known as lactic acid fermentation and ethanol metabolism respectively.[7] A possible byproduct of this reaction is cellulose, which serves as the foundation for the SCOBY biofilm.[4] Like yeasts, the species of bacteria chosen as well as culture conditions directly affect both the characteristics of the liquid kombucha product as well as the composition and morphology of the SCOBY pellicle. While there are many species that have the mechanisms necessary to form cellulose such as Acetobacter and Komagataeibacter, Gluconaceobacter are one of the most populous used, residing in between 86 and 99% of both liquid and biofilm cultures.[1] The necessary culturing conditions of these bacteria are similar to that of yeasts, but require more oxygen due to their aerobic nature in oxidizing ethanol to form organic acids.[9]

Once the internal conditions of the co-culture are in place, the symbiotic mixture is left to ferment. Certain studies have claimed optimal fermentation time to be 10 days, but the duration can be modified to change the contents of the yield; greater fermentation times correlate with higher levels of organic acids and other amino acids, which can attribute to the sour undertones of some Kombucha.[9] Despite controls in place, the species comprising the mixed cultures can still initiate metabolic change preparation to preparation with the slightest change in co-culture conditions and alter product qualities such as sugar concentration, so adequate monitoring is necessary when running in a continuous mode or reusing a starter culture.[1]

Biofilm characteristics

The formation of the cellulose pellicle at the surface of the broth yields a product with unique characteristics that both bacteria and consumers find advantageous. Upon inoculation into the culture, bacteria such as Acetobacter immediately begin pulling glucose molecules together outside of the cell and joining them via β(1-4) linkages to form long, slender structures extending from their cell membranes called fibrils.[1] The nanocellulose composing these fibrils demonstrates great strength and stability while still allowing hydrophilic interactions and biocompatibility, making it a great resource for the culture to use.[10] A variety of inter and intramolecular bonding events join numerous fibrils together into the final, much larger structures known as microfibrils; because of the integrity of the microfibrils and the organized, linear nature of cellulose bonds, the resulting biofilm can also be referred to as a matrix or mat.[10] This biofilm is a natural defense mechanism for the co-culture, and can withstand extreme conditions such as temperature and UV radiation.[10] Two additional characteristics of the nanofibril cellulose SCOBY—its high purity and crystallinity—are currently a target in biomedical research in the formation of biocompatible tissue scaffolds, cardiovascular components such as blood vessels, bone grafts, and connective tissue replacements.[11] The nanocellulose fibrils can also be extracted via acid hydrolysis and used in the food packaging, clothing, and wastewater treatment industries.[1][10]

The thickness of a kombucha SCOBY is contingent on all brewing conditions, but one study reported an average a thickness of two to five millimeters.[12] SCOBYs can be divided to start multiple cultures or dehydrated for storage and later use. Once removed, the culture will begin to regenerate a new pellicle known informally as a "baby SCOBY." This process can be repeated multiple times for months at a time.[13]

A group of kombucha SCOBYs

Use in food production

In addition to kombucha, there are a variety of other foods and beverages which require a similar "symbiotic culture" in their production such as:

Use in clothing production

Queensland University of Technology and the State Library of Queensland have been using kombucha scoby to produce a workable bio-textile, called a "vegan leather".[14]

Use in Circuit Boards

A small international team of material and computer engineers from the UK, Italy and Greece has tested the possibility of using kombucha SCOBY to produce electronic circuit boards.[15]

See also

References

  1. ^ a b c d e f g h i j Villarreal-Soto, Silvia Alejandra; Beaufort, Sandra; Bouajila, Jalloul; Souchard, Jean-Pierre; Taillandier, Patricia (March 2018). "Understanding Kombucha Tea Fermentation: A Review: Understanding Kombucha tea fermentation…". Journal of Food Science. 83 (3): 580–588. doi:10.1111/1750-3841.14068. PMID 29508944.
  2. ^ a b c Bokulich, N. A.; Bamforth, C. W. (2013-06-01). "The Microbiology of Malting and Brewing". Microbiology and Molecular Biology Reviews. 77 (2): 157–172. doi:10.1128/MMBR.00060-12. ISSN 1092-2172. PMC 3668669. PMID 23699253.
  3. ^ a b "Lactic Acid Bacteria and Wine Spoilage". Midwest Grape and Wine Industry Institute. Retrieved 2020-05-12.
  4. ^ a b c d May, Alexander; Narayanan, Shrinath; Alcock, Joe; Varsani, Arvind; Maley, Carlo; Aktipis, Athena (2019-09-03). "Kombucha: a novel model system for cooperation and conflict in a complex multi-species microbial ecosystem". PeerJ. 7: e7565. doi:10.7717/peerj.7565. ISSN 2167-8359. PMC 6730531. PMID 31534844.
  5. ^ "Homemade Kombucha". Fonsly. 13 November 2019. Retrieved 1 August 2021.
  6. ^ Yao, Wanying; Nokes, Sue E. (2013). "The use of co-culturing in solid substrate cultivation and possible solutions to scientific challenges". Biofuels, Bioproducts and Biorefining. 7 (4): 361–372. doi:10.1002/bbb.1389. ISSN 1932-1031. S2CID 55738159.
  7. ^ a b "Experiment with Fermentation using Kombucha". RockEDU. Retrieved 2020-05-12.
  8. ^ "Fermented and vegetables. A global perspective. Chapter 3". www.fao.org. Retrieved 2020-05-12.
  9. ^ a b St-Pierre, Danielle (2019-08-23). Microbial Diversity of the Symbiotic Colony of Bacteria and Yeast (SCOBY) and its Impact on the Organoleptic Properties of Kombucha (MS thesis). The University of Maine.
  10. ^ a b c d Dima, Stefan-Ovidiu; Panaitescu, Denis-Mihaela; Orban, Csongor; Ghiurea, Marius; Doncea, Sanda-Maria; Fierascu, Radu Claudiu; Nistor, Cristina Lavinia; Alexandrescu, Elvira; Nicolae, Cristian-Andi; Trică, Bogdan; Moraru, Angela (2018). "Bacterial Nanocellulose from Side-Streams of Kombucha Beverages Production: Preparation and Physical-Chemical Properties". Polymers. 9 (8): 374. doi:10.3390/polym9080374. PMC 6418918. PMID 30971046.
  11. ^ Torres, Fernando; Commeaux, Solene; Troncoso, Omar (2012-12-05). "Biocompatibility of Bacterial Cellulose Based Biomaterials". Journal of Functional Biomaterials. 3 (4): 864–878. doi:10.3390/jfb3040864. ISSN 2079-4983. PMC 4030925. PMID 24955750.
  12. ^ Shade, Ashley (2011-07-27). "The Kombucha Biofilm: a Model System for Microbial Ecology" (PDF). Yale University. Archived from the original (PDF) on 2021-02-17. Retrieved 2020-05-12.
  13. ^ "The 30+ Most Common Questions About Kombucha Tea | Kombucha FAQ". Retrieved 2020-05-12.
  14. ^ Mitchell-Whittington, Amy (2016-08-04). "QUT and State Library leading the way in 'vegan leather'". BrisbaneTimes.com.au. Retrieved 2016-08-05.
  15. ^ Yirka, Bob; Xplore, Tech. "Testing the use of kombucha to make circuit boards". techxplore.com. Retrieved 2023-05-24.

Further reading

Retrieved from "https://en.wikipedia.org/w/index.php?title=SCOBY&oldid=1224338400"