Jump to content

Smith & Wesson

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 12.96.65.14 (talk) at 15:27, 11 July 2007 (→‎Agreement of 2000: removed this section entirely. the referenced websites contain numerous false claims, about agreements that never took place). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Smith & Wesson Holding Corp.
Company typePublic NYSE: SWHC
IndustryAerospace/Defense Products & Services
Founded1852
FounderHorace Smith, Daniel B. Wesson
Headquarters
Springfield, Massachusetts
,
United States of America
Key people
Michael F. Golden (CEO), John A. Kelly (CFO),
ProductsFirearms and law enforcement goods
RevenueUS$190 million (2006)
US$12.6 million (2006)
Number of employees
832 (2006)
SubsidiariesThompson/Center
WebsiteSmith-Wesson.com

Smith & Wesson Nasdaq: SWHC (S&W) is the largest manufacturer of handguns in the United States. The corporate headquarters is in Springfield, Massachusetts. Smith & Wesson is known for the many types of ammunition it has introduced over the years and for its revolver expertise.

History

  • Cal. .44, between 1881 and 1923
    Cal. .44, between 1881 and 1923
  • Model 1, cal. .22
    Model 1, cal. .22
  • Smith & Wesson Volcanic, cal. .31, between 1845 and 1855
    Smith & Wesson Volcanic, cal. .31, between 1845 and 1855
  • Model 3, Cal. .44, between 1874 and 1878
    Model 3, Cal. .44, between 1874 and 1878

Beginning

In 1852, partners Horace Smith and Daniel B. Wesson formed a company to produce a lever-action pistol nicknamed the Volcanic pistol. The company became known as the "Volcanic Repeating Arms Company"; financial difficulties caused it to come into the majority ownership of investor Oliver Winchester.

In 1856, the partners left the Volcanic Company to begin a new company and to manufacture a newly-designed revolver-and-cartridge combination. The timing of the founding of this new company proved quite opportune for the partners, since the onset of the American Civil War five years later produced a great demand for Smith & Wesson's products.

In 1964, the company passed from Wesson family control, and subsequently several conglomerates took control of it.

From 1987 to 2001 Tomkins PLC, a British company, owned Smith & Wesson.


Acquisition by Saf-T-Hammer

On May 11, 2001, Saf-T-Hammer Corporation acquired Smith & Wesson Corp. from Tomkins PLC for US$15 million, a fraction of the US$112 million originally paid by Tomkins. Saf-T-Hammer also assumed US$30 million in debt, bringing the total purchase price to US$45 million.[1][2] Saf-T-Hammer, a manufacturer of gun locks and other firearms safety products, purchased the company with the intention of incorporating its line of security products into all Smith & Wesson firearms in compliance with the 2000 agreement.

The acquisition of Smith & Wesson was chiefly brokered by Saf-T-Hammer President Bob Scott, who had left Smith & Wesson in 1999 because of a disagreement with Tomkins’ policies. After the purchase, Scott became the president of Smith & Wesson to guide the 157-year-old company back to its former standing in the market.

On February 15, 2002, the name of the newly formed entity was changed to Smith & Wesson Holding Corporation.

Ammunition types introduced by Smith & Wesson

Famous revolvers

Smith & Wesson Model 60, 3 inch barrel
  • S&W Model 3—first automatic ejection of used ammunition
J-Frame (small) Models
  • S&W Model 36—known as the "Chiefs Special"; first J-frame (1950)
  • S&W Model 60—first stainless steel revolver (1965); the stainless Chiefs Special
  • S&W Model 340PD—first revolver made of scandium alloy, very light, possibly the final evolution of the classic J-frame Chief's Special introduced over 60 years earlier, weighs 12 ounces (340 g).
  • Centennial - standard and "Airweight" (Models 40, 42, 442, 640, 642) (once also available in 9x19mm caliber as the Model 940)
  • S&W Ladysmith
K-Frame (medium) Models
L-Frame (medium-large) Models
  • Model 586— blued steel "Distinguished Combat Magnum"
  • S&W Model 686— stainless steel "Distinguished Combat Magnum"
N-Frame (large) Models
  • S&W Model 21
  • S&W Model 22
  • S&W Model 24
  • S&W Model 25— both .45 ACP and .45 LC
  • Model 27— first .357 Magnum; usually a custom or limited-run revolver, with a deep blue lustre
  • Model 28— "Highway Patrolman" .357 Magnum; fewer frills than the Model 27, same performance; marketed to police for its reduced price and equal performance.
  • Model 29— first .44 Magnum, made famous by its appearance in the film Dirty Harry
  • S&W Model 58— .41 Magnum; 4-inch barrel with fixed sights; marketed as a police duty revolver offering greater power than .38/.357 revolvers when using a reduced power .41 Magnum police load
  • S&W Model 1917— first revolver chambered for .45 ACP
  • S&W Model 624
  • Model 625— used by Jerry Miculek to set the world record for 12 rounds (with one reload) on target in 2.99 seconds
  • S&W Model 627— replacement for Model 27; chambered for 8 rounds of .357
  • S&W Model 629
  • S&W Model 329PD—same as the 629 made with scandium and titanium and weighing 26 ounces (740 g). Lightest current production .44 magnum.
X-Frame

Famous semi-automatic pistols

Classic semi-automatic pistols

Sigma series

A Sigma pistol

Smith & Wesson introduced the Sigma series of recoil-operated, locked-breech semi-auto pistols in 1994 with the Sigma 40, followed by the Sigma 9. Sigma pistols bore so much similarity to Glock's that users could reportedly interchange many parts between Glock and Sigma models. The similarities were so great that many pundits referred to the Sigma series as "Swocks", a playful contraction of S&W and Glock. As a result, Glock initiated a patent infringement lawsuit against Smith & Wesson, which paid an undisclosed sum (the amount of three million dollars has been theorized) to Glock for infringement of their patents. S&W thereupon received the rights to continue the production of Sigma line, but they were forced to redesign the pistol's trigger mechanism so that it did not infringe upon Glock's patents.

The gun frame is manufactured from polymer, while the slide and barrel use either stainless steel or carbon steel. In 1999, Smith & Wesson updated the Sigma by shortening the barrel (from 4-1/2 to 4 inches) and added an integral accessory rail for lights and laser target designators.

SW99 Series

S&W also reached an agreement with Walther to produce variations of the P99 line of pistols. Branded as the SW99, the pistol is available in several calibers, including 9mm, .40 S&W, and .45 ACP, and in both full size and compact variations. Under the terms of the agreement, Walther produced the frames, and Smith and Wesson produced the slide and barrel. The pistol has several cosmetic differences from the original Walther design and strongly resembles a hybrid between the P99 and the Sigma series.

M&P Series

Pistols

In 2005, Smith & Wesson debuted a new polymer-frame pistol intended for the law enforcement market. Dubbed the M&P (for Military and Police), its name was meant to evoke S&W's history as the firearm of choice for law enforcement agencies through its previous lineup of M&P revolvers. Though similar in appearance to the still-produced Sigma lineup, the M&P is a new design. Many of the ergonomic study elements that had been incorporated into the Sigma and the SW99 were brought over to the M&P. The improved trigger weight and feel, and unique takedown method (not requiring a dry pull of the trigger) were meant to set the M&P apart from both the Sigma and the popular Glock pistols.

The M&P is available in 9x19, .40 S&W, and .357 SIG. A .45 ACP model was released in early 2007, after making its debut at the SHOT Show. In addition, compact versions are available in 9x19, .40 S&W and .357 SIG.

SW1911 Series

In 2003, Smith & Wesson introduced their variation of the classic M1911 .45 ACP semi-automatic handgun, the SW1911. This firearm retains the M1911's well known dimensions, operation, and feel, while adding a variety of modern touches. Updates to the design include serration at the front of the slide for easier operation and disassembly, a high "beaver-tail" grip safety, external extractor, lighter weight hammer and trigger, as well as updated internal safeties to prevent accidental discharges if dropped. S&W 1911s are available with black finished carbon steel slides and frames or bead blasted stainless slides and frames. They are also available with aluminum frames alloyed with scandium in either natural or black finishes. These updates have resulted in a firearm that is true to the M1911 design, with additions that would normally be considered "custom", with a price similar to entry-level M1911 designs from other manufacturers.

Rifles

In January 2006, Smith & Wesson entered into the AR-15 market with its M&P15 series of rifles. Unveiled at SHOT Show 2006, the rifle debuted in two varieties; the M&P15 and the M&P15T. Both are basically the same rifle, chambered in 5.56 NATO, with the T model featuring folding sights and a four-sided accessories rail. At its debut, the M&P15's suggested retail price was $1,200, while the M&P15T retailed for $1,700. Their current line consists of four models, ranging in price from $1,300 to $2,200. [3]

Shotguns

Smith & Wesson produced the Model 916,916T,916A 12 gauge shotguns which were plagued by poor quality control and had cascading minor issues in the field, prompting them to move on to the model 1000 and 3000 shotguns. However, Smith & Wesson exited the shotgun market in the early 1970s to return to their "core" market of handguns.

In November 2006, S&W announced that it would reenter the shotgun market with two new lines of shotguns, the Elite series and the 1000 series, unveiled at the 2007 SHOT Show. Along with the new shotguns, S&W debuted the Heirloom Warranty program, a first of its kind in the firearms industry. The warranty provides both the original buyer and the buyer's chosen heir with a lifetime warranty on all Elite Series shotguns.[4]

Internal locking mechanism

All Smith & Wesson handguns have been equipped with an internal locking mechanism since the acquisition by Saf-T-Hammer. The mechanism itself is relatively unobtrusive, is activated with a special key, and renders the firearm inoperable. While the lock can simply not be 'used', some gun enthusiasts refuse to buy "post-lock" guns, fearing the lock might cause the gun to fail ( i.e., malfunction ) when they need it most. Smith & Wesson has repeatedly stated that the locking mechanism does not affect reliability.

Other products

Smith & Wesson markets gun accessories, handcuffs, safes, apparel, collectibles, knives, tools, toys, and a myriad of other products under it's brand name, including cologne and handbags.

In October 2002, Smith & Wesson announced it had entered into a licensing agreement with Cycle Source Group to produce a line of bicycles designed by and for law enforcement. These bicycles feature custom configurations and silent hubs ( for 'stealth' cycling ), and are available for purchase by 'civilians'. [5][6]

Smith & Wesson flashlights are available to the general public. They are designed and produced by PowerTech, Inc. in Collierville, Tennessee.

Smith & Wesson also has a line of wood pellet grills. They are named after various pistol cartridges, such as .22 Mag, .38 Special, .44 Mag, .357 Mag, and .500 Mag.

Miscellaneous

Nineteenth century Japanese samurai and revolutionary Sakamoto Ryoma carried a Smith & Wesson revolver.[7]

In 2005, the History Channel released a documentary about Smith & Wesson titled "Tales of the Gun: Guns of Smith & Wesson".[8]

References

  1. ^ Article on Sale of Smith & Wesson
  2. ^ Phoenix Business Journals on Smith & Wesson Sale
  3. ^ S&W press release on new M&P15 Rifles
  4. ^ S&W press release on new line of shotguns
  5. ^ S&W press release on new line of bicycles
  6. ^ S&W press release on Police Bicycles
  7. ^ Things Asian article on Sakamoto Ryoma
  8. ^ AETV Store
Retrieved from "https://en.wikipedia.org/w/index.php?title=Smith_%26_Wesson&oldid=143979243"