Jump to content

BoPET

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 69.7.37.70 (talk) at 05:00, 18 November 2010 (→‎Other). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

metallized boPET film, 32 layers of ~15 µm thickness each

BoPET (Biaxially-oriented polyethylene terephthalate) is a polyester film made from stretched polyethylene terephthalate (PET) and is used for its high tensile strength, chemical and dimensional stability, transparency, reflectivity, gas and aroma barrier properties and electrical insulation.

A variety of companies manufacture boPET and other polyester films under different brand names. In the US and Britain, the most well-known trade names are Mylar, Melinex and Hostaphan.

History

BoPET film was developed in the mid-1950s, originally by DuPont and Imperial Chemical Industries (ICI). In 1960 and 1964, NASA launched the Echo satellites, 100 feet (30 m) diameter balloons of metallized 0.005 inches (0.13 mm) thick boPET film.

Manufacture and properties

Chemical structure of polyethylene terephthalate

The manufacturing process begins with a film of molten polyethylene terephthalate (PET) being extruded onto a chill roll, which quenches it into the amorphous state.[1] It is then biaxially oriented by drawing. The most common way of doing this is the sequential process, in which the film is first drawn in the machine direction using heated rollers and subsequently drawn in the transverse direction, i.e. orthogonally to the direction of travel, in a heated oven. It is also possible to draw the film in both directions simultaneously, although the equipment required for this is somewhat more elaborate. Draw ratios are typically around 3 to 4 in each direction.

Once the drawing is completed, the film is "heat set" or crystallized under tension in the oven at temperatures typically above 200 °C (392 °F). The heat setting step prevents the film from shrinking back to its original unstretched shape and locks in the molecular orientation in the film plane. The orientation of the polymer chains is responsible for the high strength and stiffness of biaxially oriented PET film, which has a typical Young's modulus of about 4 GPa. Another important consequence of the molecular orientation is that it induces the formation of many crystal nuclei. The crystallites that grow rapidly reach the boundary of the neighboring crystallite and remain smaller than the wavelength of visible light. As a result, biaxially oriented PET film has excellent clarity, despite its semicrystalline structure.

If it were produced without any additives, the surface of the film would be so smooth that layers would adhere strongly to one another when the film is wound up, similar to the sticking of clean glass plates when stacked. To make handling possible, microscopic inert inorganic particles are usually embedded in the PET to roughen the surface of the film.

Biaxially oriented PET film can be metallized by vapor deposition of a thin film of evaporated aluminum, gold, or other metal onto it. The result is much less permeable to gases (important in food packaging) and reflects up to 99% of light, including much of the infrared spectrum. For some applications like food packaging, the aluminized boPET film can be laminated with a layer of polyethylene, which provides sealability and improves puncture resistance. The polyethylene side of such a laminate appears dull and the PET side shiny.

Other coatings, such as conductive indium tin oxide (ITO), can be applied to boPET film by sputter deposition.

Metallized nylon (or "foil") balloons used for floral arrangements and parties are often mistakenly called "Mylar", one of the trade names for boPET film.

Applications

Uses for boPET polyester films include, but are not limited to:

Flexible packaging and food contact applications

  • Laminates containing metallized boPET foil (In technical language called printin or laminate web substrate) protect food against oxidation and aroma loss, achieving long shelf life. Examples are coffee "foil" packaging and pouches for convenience foods.
  • Attractive glossy or matte surfaces on the outside of packages are achieved using boPET.
  • White boPET web substrate is used as lidding for dairy goods such as yoghurt.
  • Clear boPET web substrate is used as lidding for fresh or frozen ready meals. Due to its excellent heat resistance, it can remain on the package during microwave or oven heating.
  • Roasting bags

Covering over paper

  • A clear overlay on a map, on which notations, additional data, or copied data, can be drawn without damaging the map
  • Metallized boPET is used as a mirror-like decorative surface on some book covers, T-shirts, and other flexible cloths.
  • Protective covering over buttons/pins/badges
  • The glossy top layer of a Polaroid SX-70 photographic print
  • As a backing for very fine sandpaper
  • boPET film is used in bagging comic books, in order to best protect them during storage from environmental conditions (moisture, heat, and cold) that would otherwise cause paper to slowly deteriorate over time. This material is used for archival quality storage of documents by the Library of Congress[2] and several major library comic book research collections, including the Comic Art Collection at Michigan State University.[3] While boPET is widely (and effectively) used in this archival sense, it is not immune to the effects of fire and heat and could potentially melt, depending on the intensity of the heat source, causing further damage to the encased item.[4]
  • For protecting the spine of important documents, such as medical records.

Insulating material

  • An electrical insulating material
  • Insulation for houses and tents in cold environments, covering the inner walls with the metallized surface facing inward, thus reflecting heat back into the space
  • Insulation for houses and tents in hot environments, covering the outer walls with the metallized surface facing outward, thus reflecting heat away from the space
  • Five layers of metallized boPET film in NASA's spacesuits make them radiation resistant and keep astronauts warm.
  • Metallized boPET film "emergency blankets" conserve a shock victim's body heat.
  • As a thin strip to form an airtight seal between the control surfaces and adjacent structure of aircraft, especially gliders.
  • Light insulation for indoor gardening.
  • Wildland fire shelters.
  • Proximity (aluminized) suits used by AR-FF fire fighters for protection from the high amount of heat release from fuel fires.
  • Aluminized boPET films are no longer used as thermal and acoustic insulation in aircraft since they were found to have been a factor in the Swissair Flight 111 crash. The accident investigation showed that the aluminum layer prevents the film from self-extinguishing in a fire under the conditions in aircraft.[5]

Solar and marine applications

  • Metallized boPET is intended to be used for solar sails as an alternative means of propulsion for spacecraft such as Cosmos 1
  • Metallized boPET solar curtains reflect sunlight and heat away from windows.
  • Aluminized, as an inexpensive solar eclipse viewer, although care must be taken, because invisible fissures can form in the metal film, reducing its effectiveness.
  • High performance sails for sailboats and hanggliders
  • Use boPET films as the back face of the PV modules in solar panels
  • Metallized boPET as a reflector material for solar cooking stoves

Science

  • Amateur and professional visual and telescopic solar filters. BoPET films are often annealed to a glass element to improve thermal conductivity, and guarantee the necessary flat surface needed for even telescopic solar observation. Manufacturers will typically utilise films with thicknesses of 280–500 micrometres (0.011–0.020 in), in order to give the films better resilience. 250-micrometre (0.0098 in) thickness films with a heavy aluminium coating are generally preferred for naked-eye Solar observation during eclipses.
  • Films in annular ring mounts on gas-tight cells, will readily deform into spherical mirrors. Photomultiplier cosmic-ray observatories often make use of these mirrors for inexpensive large (1.0 m and above), lightweight mirror surfaces for sky-sector low and medium energy cosmic ray research.
  • As a light diaphragm material separating gases in hypersonic shock and expansion tube facilities.
  • As a beamsplitter in Fourier transform infrared spectroscopy, typically with laser applications. Film thicknesses are often in the 500 micrometre range.
  • Coating around hematocrit tubes.
  • Insulating material for a cryocooler radiation shield.

Electronic and acoustic applications

Graphic arts

Other

  • Route information signs, called rollsigns or destination blinds, displayed by public transport vehicles
  • For materials in kites
  • Covering glass to decrease probability of shattering
  • In theatre effects as confetti.
  • As the adhesive strip to attach the string to a teabag
  • One of the many materials used as Windsavers or valves for valved harmonicas
  • On farmland, highly reflective aluminized PET film ribbons are tied to the plants to create shimmers from the sun for an effect similar to a scarecrow.
  • Measuring Tape

References

  1. ^ manufacturing process
  2. ^ Library of Congress
  3. ^ Scott, Randall W. “A Practicing Comic-Book Librarian Surveys His Collection and Craft.” Serials Review 24.1 (1998): 49-56.
  4. ^ "Albany library's entire collection exposed to smoke". The Athens (NY) Messenger. Retrieved 2008-07-27. {{cite web}}: External link in |publisher= (help)
  5. ^ accident investigation
Retrieved from "https://en.wikipedia.org/w/index.php?title=BoPET&oldid=397445391"