Bathymetry

Bathymetry is the study of underwater depth of lake or ocean floors. In other words, bathymetry is the underwater equivalent to hypsometry or topography. The name comes from Greek βαθύς (bathus), "deep",^[1] and μέτρον (metron), "measure".^[2] Bathymetric (or hydrographic) charts are typically produced to support safety of surface or sub-surface navigation, and usually show seafloor relief or terrain as contour lines (called depth contours or isobaths) and selected depths (soundings), and typically also provide surface navigational information. Bathymetric maps (a more general term where navigational safety is not a concern) may also use a Digital Terrain Model and artificial illumination techniques to illustrate the depths being portrayed. Paleobathymetry is the study of past underwater depths.

Measurement

Originally, bathymetry involved the measurement of ocean depth through depth sounding. Early techniques used pre-measured heavy rope or cable lowered over a ship's side. This technique measures the depth only a singlular point at a time, and is therefore inefficient. It is also subject to movements of the ship and currents moving the line out of true and therefore is inaccurate.

The data used to make bathymetric maps today typically comes from an echosounder (sonar) mounted beneath or over the side of a boat, "pinging" a beam of sound downward at the seafloor or from remote sensing LIDAR or LADAR systems.^[3] The amount of time it takes for the sound or light to travel through the water, bounce off the seafloor, and return to the sounder informs the equipment of the distance to the seafloor. LIDAR/LADAR surveys are usually conducted by airborne systems.

The seafloor topography near the Puerto Rico Trench

Starting in the early 1930s, single-beam sounders were used to make bathymetry maps. Today, multibeam echosounders (MBES) are typically used, which use hundreds of very narrow adjacent beams arranged in a fan-like swath of typically 90 to 170 degrees across. The tightly packed array of narrow individual beams provides very high angular resolution and accuracy. In general a wide swath, which is depth dependent, allows a boat to map more seafloor in less time than a single-beam echosounder by making fewer passes. The beams update many times per second (typically 0.1-50 Hz depending on water depth), allowing faster boat speed while maintaining 100% coverage of the seafloor. Attitude sensors allow for the correction of the boat's roll, pitch and yaw on the ocean surface, and a gyrocompass provides accurate heading information to correct for vessel yaw. (Most modern MBES systems use an integrated motion-sensor and position system that measures yaw as well as the other dynamics and position.) A boat-mounted Global Positioning System (GPS) (or other Global Navigation Satellite System (GNSS)) positions the soundings with respect to the surface of the earth. Sound speed profiles (speed of sound in water as a function of depth) of the water column correct for refraction or "ray-bending" of the sound waves owing to non-uniform water column characteristics such as temperature, conductivity, and pressure. A computer system processes all the data, correcting for all of the above factors as well as for the angle of each individual beam. The resulting sounding measurements are then processed either manually, semi-automatically or automatically (in limited circumstances) to produce a map of the area. As of 2010^[update] a number of different outputs are generated, including a sub-set of the original measurements that satisfy some conditions (e.g., most representative likely soundings, shallowest in a region, etc.) or integrated Digital Terrain Models (DTM) (e.g., a regular or irregular grid of points connected into a surface). Historically, selection of measurements was more common in hydrographic applications while DTM construction was used for engineering surveys, geology, flow modeling, etc. Since ca. 2003-2005, DTMs have become more accepted in hydrographic practice.

Satellites are also used to measure bathymetry. Satellite radar maps deep-sea topography by detecting the subtle variations in sea level caused by the gravitational pull of undersea mountains, ridges, and other masses. On average, sea level is higher over mountains and ridges than over abyssal plains and trenches.^[4]

In the United States the United States Army Corps of Engineers performs or commissions most surveys of navigable inland waterways, while the National Oceanic and Atmospheric Administration (NOAA) performs the same role for ocean waterways. Coastal bathymetry data is available from NOAA's National Geophysical Data Center (NGDC).^[5] Bathymetric data is usually referenced to tidal vertical datums.^[6] For deep-water bathymetry, this is typically Mean Sea Level (MSL), but most data used for nautical charting is referenced to Mean Lower Low Water (MLLW) in American surveys, and Lowest Astronomical Tide (LAT) in other countries. Many other datums are used in practice, depending on the locality and tidal regime.

Occupations or careers related to bathymetry include the study of oceans and rocks and minerals on the ocean floor, and the study of underwater earthquakes or volcanoes. The taking and analysis of bathymetric measurements is one of the core areas of modern hydrography, and a fundamental component in ensuring the safe transport of goods worldwide.

References

^ βαθύς, Henry George Liddell, Robert Scott, A Greek-English Lexicon, on Perseus
^ μέτρον, Henry George Liddell, Robert Scott, A Greek-English Lexicon, on Perseus
^ Olsen, R. C. (2007), Remote Sensing from Air and Space, SPIE, ISBN 978-0-8194-6235-0
^ Thurman, H. V. (1997), Introductory Oceanography, New Jersey, USA: Prentice Hall College, ISBN 0-13-262072-3
^ NGDC-Bathymetry, Topography, & Relief
^ NGDC/WDC MGG, Boulder-Coastal relief model development

External links

[1] βαθύς, Henry George Liddell, Robert Scott, A Greek-English Lexicon, on Perseus

[2] μέτρον, Henry George Liddell, Robert Scott, A Greek-English Lexicon, on Perseus

[Olsen-3] Olsen, R. C. (2007), Remote Sensing from Air and Space, SPIE, ISBN 978-0-8194-6235-0

[Thurman-4] Thurman, H. V. (1997), Introductory Oceanography, New Jersey, USA: Prentice Hall College, ISBN 0-13-262072-3

[5] NGDC-Bathymetry, Topography, & Relief

[6] NGDC/WDC MGG, Boulder-Coastal relief model development

[1]

[2]

[3]

[4]

[5]

[6]

v t e Physical oceanography
Waves	Airy wave theory Ballantine scale Benjamin–Feir instability Boussinesq approximation Breaking wave Clapotis Cnoidal wave Cross sea Dispersion Edge wave Equatorial waves Gravity wave Green's law Infragravity wave Internal wave Iribarren number Kelvin wave Kinematic wave Longshore drift Luke's variational principle Mild-slope equation Radiation stress Rogue wave Rossby wave Rossby-gravity waves Sea state Seiche Significant wave height Soliton Stokes drift Stokes problem Stokes wave Swell Trochoidal wave Tsunami megatsunami Undertow Ursell number Wave action Wave base Wave height Wave nonlinearity Wave power Wave radar Wave setup Wave shoaling Wave turbulence Wave–current interaction Waves and shallow water one-dimensional Saint-Venant equations shallow water equations Wind fetch Wind setup Wind wave model
Circulation	Atmospheric circulation Baroclinity Boundary current Coriolis force Coriolis–Stokes force Craik–Leibovich vortex force Downwelling Eddy Ekman layer Ekman spiral Ekman transport El Niño–Southern Oscillation General circulation model Geochemical Ocean Sections Study Geostrophic current Global Ocean Data Analysis Project Gulf Stream Humboldt Current Hydrothermal circulation Langmuir circulation Longshore drift Loop Current Modular Ocean Model Ocean current Ocean dynamical thermostat Ocean dynamics Ocean gyre Overflow Princeton Ocean Model Rip current Subsurface ocean current Sverdrup balance Thermohaline circulation shutdown Upwelling Whirlpool Wind generated current World Ocean Circulation Experiment
Tides	Amphidromic point Earth tide Head of tide Internal tide Lunitidal interval Perigean spring tide Rip tide Rule of twelfths Slack tide Theory of tides Tidal bore Tidal force Tidal power Tidal race Tidal range Tidal resonance Tide gauge Tideline
Landforms	Abyssal fan Abyssal plain Atoll Bathymetric chart Carbonate platform Coastal geography Cold seep Continental margin Continental rise Continental shelf Contourite Guyot Hydrography Knoll Ocean bank Oceanic basin Oceanic plateau Oceanic trench Passive margin Seabed Seamount Submarine canyon Submarine volcano
Plate tectonics	Convergent boundary Divergent boundary Fracture zone Hydrothermal vent Marine geology Mid-ocean ridge Mohorovičić discontinuity Oceanic crust Outer trench swell Ridge push Seafloor spreading Slab pull Slab suction Slab window Subduction Transform fault Vine–Matthews–Morley hypothesis Volcanic arc
Ocean zones	Benthic Deep ocean water Deep sea Littoral Mesopelagic Oceanic Pelagic Photic Surf Swash
Sea level	Deep-ocean Assessment and Reporting of Tsunamis Global Sea Level Observing System North West Shelf Operational Oceanographic System Sea-level curve Sea level drop Sea level rise World Geodetic System
Acoustics	Deep scattering layer Ocean acoustic tomography Sofar bomb SOFAR channel Underwater acoustics
Satellites	Jason-1 OSTM/Jason-2 Jason-3
Related	Acidification Argo Benthic lander Color of water DSV Alvin Marginal sea Marine energy Marine pollution Mooring National Oceanographic Data Center Ocean Explorations Observations Reanalysis Ocean surface topography Ocean temperature Ocean thermal energy conversion Oceanography Outline of oceanography Pelagic sediment Sea surface microlayer Sea surface temperature Seawater Science On a Sphere Stratification Thermocline Underwater glider Water column World Ocean Atlas
Category Commons Oceans portal

Measurement

See also

References

External links