Maleic acid
Names | |
---|---|
Preferred IUPAC name
(2Z)-But-2-enedioic acid | |
Other names
(Z)-butenedioic acid, cis-butenedioic acid, malenic acid, maleinic acid, toxilic acid
| |
Identifiers | |
3D model (JSmol)
|
|
ChEBI | |
ChEMBL | |
ChemSpider | |
ECHA InfoCard | 100.003.403 |
EC Number |
|
KEGG | |
RTECS number |
|
UNII | |
CompTox Dashboard (EPA)
|
|
| |
| |
Properties | |
C4H4O4 | |
Molar mass | 116.072 g·mol−1 |
Appearance | White solid |
Density | 1.59 g/cm³ [1] |
Melting point | 135 °C (275 °F; 408 K) (decomposes)[2] |
478.8 g/L at 20 C[2] | |
Acidity (pKa) | pka1 = 1.9 pka2 = 6.07 [3] |
-49.71·10−6 cm3/mol | |
Hazards | |
NFPA 704 (fire diamond) | |
Safety data sheet (SDS) | MSDS from J. T. Baker |
Related compounds | |
Related carboxylic acids
|
fumaric acid succinic acid crotonic acid |
Related compounds
|
maleic anhydride maleimide |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Maleic acid or cis-butenedioic acid is an organic compound that is a dicarboxylic acid, a molecule with two carboxyl groups. Its chemical formula is HO2CCHCHCO2H. Maleic acid is the cis-isomer of butenedioic acid, whereas fumaric acid is the trans-isomer. It is mainly used as a precursor to fumaric acid, and relative to its parent maleic anhydride, maleic acid has few applications.
Physical properties
Maleic acid is a less stable molecule than fumaric acid. The difference in heat of combustion is 22.7 kJ/mole. The heat of combustion is -1355 kJ/mole.[4] Maleic acid is more soluble in water than fumaric acid. The melting point of maleic acid (135 °C) is also much lower than that of fumaric acid (287 °C). Both properties of maleic acid can be explained on account of the intramolecular hydrogen bonding[5] that takes place in maleic acid at the expense of intermolecular interactions, and that are not possible in fumaric acid for geometric reasons.
Production and industrial applications
In industry, maleic acid is derived by hydrolysis of maleic anhydride, the latter being produced by oxidation of benzene or butane.[6]
Maleic acid is an industrial raw material for the production of glyoxylic acid by ozonolysis.[7]
Maleic acid may be used to form acid addition salts with drugs to make them more stable, such as indacaterol maleate.
Maleic acid is also used as an adhesion promoter for different substrates, such as nylon and zinc coated metals e.g galvanized steel, in methyl methacrylate based adhesives.
Isomerization to fumaric acid
The major industrial use of maleic acid is its conversion to fumaric acid. This conversion, an isomerization, is catalysed by a variety of reagents, such as mineral acids and thiourea. Again, the large difference in water solubility makes fumaric acid purification easy.
The isomerization is a popular topic in schools. Maleic acid and fumaric acid do not spontaneously interconvert because rotation around a carbon carbon double bond is not energetically favourable. However, conversion of the cis isomer into the trans isomer is possible by photolysis in the presence of a small amount of bromine.[8] Light converts elemental bromine into a bromine radical, which attacks the alkene in a radical addition reaction to a bromo-alkane radical; and now single bond rotation is possible. The bromine radicals recombine and fumaric acid is formed. In another method (used as a classroom demonstration), maleic acid is transformed into fumaric acid through the process of heating the maleic acid in hydrochloric acid solution. Reversible addition (of H+) leads to free rotation about the central C-C bond and formation of the more stable and less soluble fumaric acid.
Some bacteria produce the enzyme maleate isomerase, which is used by bacteria in nicotinate metabolism. This enzyme catalyses isomerization between fumarate and maleate.
Other reactions
Although not practised commercially, maleic acid can be converted into maleic anhydride by dehydration, to malic acid by hydration, and to succinic acid by hydrogenation (ethanol / palladium on carbon).[9] It reacts with thionyl chloride or phosphorus pentachloride to give the maleic acid chloride (it is not possible to isolate the mono acid chloride). Maleic acid, being electrophilic, participates as a dienophile in many Diels-Alder reactions.
Maleates
The maleate ion is the ionized form of maleic acid. The maleate ion is useful in biochemistry as an inhibitor of transaminase reactions. Maleic acid esters are also called maleates, for instance dimethyl maleate.
Use in pharmaceutical drugs
Many drugs that contain amines are provided as the maleate acid salt, e.g. carfenazine, chlorpheniramine, pyrilamine, methylergonovine, and thiethylperazine.
References
- ^ Budavari, Susan, ed. (1996), The Merck Index: An Encyclopedia of Chemicals, Drugs, and Biologicals (12th ed.), Merck, ISBN 0911910123
- ^ a b Record in the GESTIS Substance Database of the Institute for Occupational Safety and Health
- ^ CRC Handbook of Chemistry and Physics, 73rd ed.; CRC Press: Boca Raton, FL., 1993
- ^ Maleic Anhydride, Maleic Acid, and Fumaric Acid, Huntsman Petrochemical Corporation
- ^ M. N. G James, G. J. B Williams (1974). "A Refinement of the Crystal Structure of Maleic Acid". Acta Crystallographica. B30 (5) (5): 1249–1275. doi:10.1107/S0567740874004626.
- ^ Kurt Lohbeck, Herbert Haferkorn, Werner Fuhrmann and Norbert Fedtke "Maleic and Fumaric Acids" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2000. doi:10.1002/14356007.a16_053
- ^ DSM glyoxylic acid production
- ^ Light isomerization experiment (from the University of Regensburg, with video)
- ^ Kwesi Amoa (2007). "Catalytic Hydrogenation of Maleic Acid at Moderate Pressures A Laboratory Demonstration". Journal of Chemical Education. 84 (12): 1948. doi:10.1021/ed084p1948.