75 mm gun M2–M6
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/23/The_British_Army_in_Italy_1944_NA16518.jpg/220px-The_British_Army_in_Italy_1944_NA16518.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/35/The_British_Army_in_Burma_1945_SE3621.jpg/220px-The_British_Army_in_Burma_1945_SE3621.jpg)
The US 75 mm gun tank gun M2 and the later M3 were the standard American tank guns of the World War II, used primarily on the two main American medium tanks of the war, the M3 Lee (M2 or M3 gun) and the M4 Sherman (M3 gun).
The lightweight M6 and M5 variants were developed to equip the M24 Chaffee light tank, and the -G and -H subtypes of the B-25 Mitchell bomber respectively. The M3 was also used on the prototype M7 Medium Tank platform.
History
![](http://upload.wikimedia.org/wikipedia/commons/thumb/9/97/Puckapunyal-M3-Lee-hull-gun-1.jpg/220px-Puckapunyal-M3-Lee-hull-gun-1.jpg)
The 75 mm tank gun has its origins in the famous French Canon de 75 modèle 1897 field gun of World War I fame, which was also adopted by the United States and used well into World War II as the 75 mm M1897 field gun. The tank and field guns fired the same range of 75x350R ammunition. The primary round was the 6.76 kg (14.9 lb) M48 High Explosive round, which travelled at 625 m/s (2,050 ft/s) and contained 1.5 pounds (680g) of TNT filling (2845 kilojoules of explosive energy) and a choice of fuse; the Super Quick (SQ) and the Delay (PD), which had delays of 0.05 and 0.15 seconds respectively. SQ was the standard setting, with PD used against structures, gun positions or lightly protected vehicles. The field gun origins of the ordnance and ammunition ensured that the M2/3/6 series HE round was highly effective for its caliber. The M48 was available in two versions, standard and supercharge, which had an increased propellent charge for greater muzzle velocity (1,885 ft/s (575 m/s) vs. 1,470 ft/s (450 m/s)) and range (2,300 yards greater).
Other important rounds fired by the 75 mm tank guns included the T30 canister shot for use against troops in the open at short range. This, which was essentially a giant shotgun shell full of large numbers of steel balls, was used primarily in the Pacific. There was also the M89 base-ejecting hexachloroethane (HC) smoke round and the M64 white phosphorus (WP or "Willy Pete") round, which proved highly effective in the bocage fighting around Normandy. Finally, there were two different armor-piercing rounds.
The first armor-piercing round was the 6.32 kg (13.9 lb) M72 AP-T, a plain uncapped armor-piercing round whose performance dropped off as range increased due to poor aerodynamics. The M72 was replaced by the 6.63 kg (14.62 lb) M61 armor-piercing capped ballistic capped high explosive with tracer (APCBC-HE-T) shell. The blunt armor-piercing cap, made of a softer metal, helped to prevent shell shatter at higher velocities and against sloped and face-hardened armor. The aerodynamic ballistic cap acted as a windscreen and improved ballistic performance, maintained velocity, and hence increased penetration at longer ranges. Once the projectile had penetrated the target, a small explosive charge contained in a cavity at the base of the shell would detonate, shattering the shell and increasing damage inside the enemy vehicle. The tracer helped in the aiming of a second shot. In practice, the majority of M61 rounds were shipped without the explosive filler.
The M61A1 used an improved method of attaching the ballistic cap to the shell. The M61 had a muzzle velocity of 617 m/s (2024.28 ft/s) and was credited with the ability to penetrate 81 millimetres (3.2 in) of rolled homogeneous armor plate at 0° from vertical at 500 yards range, which was a quite acceptable performance by the standards of 1942. This ammunition type proved lethal to the Panzer III and IV (up to Ausf. F2), as these tanks were protected by a maximum of 50 mm of face-hardened armor with little slope, which the 75 mm M3 with M61 was capable of penetrating from at least 1500 m.[1] However, in March 1942, the Germans introduced the Ausf. G verson of the Panzer IV, which was armed with the 48-caliber long KwK 40 gun, and had frontal hull armour increased to 80 mm - however, its turret and gun mantlet retained their 50 mm thickness. This was somewhat compensated by the M4 Sherman's improved armor over the earlier M3 Lee making up for the 75mm M3's diminishing battlefield dominance; Wa Pruef 1 estimated that the M4's glacis was impenetrable to the KwK 40 when standing at a 30-degree side angle, while the 75 mm M3 could penetrate the Ausf G's hull from 100 m in the same situation.[1]
British tanks in the early years of World War II relied on high-velocity, smaller-calibre anti-tank guns, such as the 40 mm calibre Ordnance QF 2 pounder and 57 mm calibre Ordnance QF 6 pounder, for their primary armament. As tank guns, these had the great disadvantage of either not having a truly effective High Explosive round or not even having a HE round at all. After experiencing the effectiveness of the American 75 mm tank guns in the infantry support role, the British opted to adopt the American caliber and ammunition by the expedient of boring-out the 6 pounder tank gun to make the Ordnance QF 75 mm. By 1944, this had become the standard British tank gun, equipping the Cromwell tank and Churchill tank for the campaigns in northwest Europe.
Variants
T6
Experimental anti-aircraft gun based on the M1897 field gun. The barrel was shortened from 36 to 31 calibers, and Nordenfelt screw breech replaced with the sliding block breech.
T7 / M2
Adaptation of the T6 for tank gun role. Used on the early M3 Lee.
- Barrel length: 31 calibers
- Muzzle velocity: 588 m/s (1,929 ft/s) with M72 AP shell
T8 / M3
Longer derivative of the M2. Equipped American and British vehicles such as the M4 Sherman, the later models of the M3 Lee and the Churchill III/IV (scavenged from General Sherman tanks in the North African theatre). The US Army also experimented with mounting the M3 on various wheeled carriages for use as anti-tank gun, but the program was cancelled due to a lack of requirement.[2]
- Barrel length: 40 calibers
- Muzzle velocity: 619 m/s (2,031 ft/s) with M72 AP shell
M4
The 75 mm aircraft gun M4 is a modification of the M3 gun found in medium tanks. It differs from the M3 gun, only in having a seat for the spline machined in the tube. It was mounted on the M6 mount.
T13E1 / M5
A lightweight version of the M3 with a lighter thin-walled barrel and a different recoil mechanism that was used in the B-25H Mitchell bomber. It uses the same ammunition and has the same ballistics as the M3.
M6
A version derived from the T13E1 for the M24 Chaffee.
- Barrel length: 39 calibres (2,92 m)
- Muzzle velocity: 619 m/s (2,031 ft/s) with M72 AP shell
Penetration comparison
Gun type | Ammunition type | Muzzle velocity (m/s) |
Penetration (mm) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
100 m | 250 m | 500 m | 750 m | 1000 m | 1250 m | 1500 m | 1750 m | 2000 m | 2500 m | 3000 m | |||
75mm L/31 (M2) | M61 versus FHA | 563 m/s (1,850 ft/s) | 92 | 89 | 84 | 79 | 75 | 71 | 67 | 63 | 59 | 53 | 47 |
75mm L/31 (M2) | M61 versus RHA | 563 m/s (1,850 ft/s) | 78 | 76 | 72 | 68 | 65 | 61 | 58 | 55 | 52 | 47 | 42 |
75mm L/31 (M2) | M72 versus FHA | 563 m/s (1,850 ft/s) | 82 | 76 | 67 | 59 | 52 | 45 | 40 | 35 | 31 | 24 | 19 |
75mm L/31 (M2) | M72 versus RHA | 563 m/s (1,850 ft/s) | 95 | 90 | 81 | 73 | 66 | 60 | 54 | 49 | 45 | 36 | 30 |
75mm L/40 (M3/M6) | M61 versus FHA | 618 m/s (2,030 ft/s) | 102 | 99 | 95 | 90 | 86 | 82 | 79 | 75 | 72 | 65 | 60 |
75mm L/40 (M3/M6) | M61 versus RHA | 618 m/s (2,030 ft/s) | 88 | 85 | 81 | 77 | 73 | 69 | 65 | 62 | 59 | 53 | 47 |
75mm L/40 (M3/M6) | M72 versus FHA | 618 m/s (2,030 ft/s) | 91 | 85 | 75 | 66 | 58 | 51 | 45 | 40 | 35 | 27 | 21 |
75mm L/40 (M3/M6) | M72 versus RHA | 618 m/s (2,030 ft/s) | 109 | 102 | 92 | 84 | 76 | 68 | 62 | 56 | 51 | 41 | 34 |
See also
Weapons of comparable role, performance and era
- Ordnance QF 75 mm : contemporary British tank gun
- 7.5 cm KwK 40 : contemporary German tank gun
- F-34 tank gun : contemporary Soviet tank gun
Notes
- ^ a b Jentz, Thomas; Doyle, Hilary (2001). Panzerkampfwagen IV Ausf. G, H and J 1942-45. Osprey Publishing. pp. 20–21. ISBN 1841761826.
- ^ Zaloga, Delf - US Anti-tank Artillery 1941-45, p 8-9
- ^ Bird, Lorrin Rexford; Livingston, Robert D. (2001). WWII Ballistics: Armor and Gunnery. Overmatch Press. pp. 62–63.
References
- Zaloga, Steven J., Brian Delf - US Anti-tank Artillery 1941-45 (2005) Osprey Publishing (New Vanguard 107), ISBN 1-84176-690-9.
- TM 9-2800 Standard Artillery and Fire Control Material (dated February 1944)
External links
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- Armor penetration table of US 75 mm M3 L/40 guns (search for Intelligence then Text Database of Penetration Data and select US guns)