Jump to content

2-Acetylfuran

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Headbomb (talk | contribs) at 23:22, 26 February 2016 (clean up, replaced: Archiv der Pharmazie (Weinheim, Germany) → Archiv der Pharmazie (2) using AWB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

2-Acetylfuran
Names
IUPAC name
1-(2-furanyl)-ethanone
Other names
2-Acetylfuran; Acetyl furan; 2-furyl methyl ketone,
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.013.416 Edit this at Wikidata
  • InChI=1S/C6H6O2/c1-5(7)6-3-2-4-8-6/h2-4H,1H3
    Key: IEMMBWWQXVXBEU-UHFFFAOYSA-N
  • InChI=1/C6H6O2/c1-5(7)6-3-2-4-8-6/h2-4H,1H3
    Key: IEMMBWWQXVXBEU-UHFFFAOYAG
  • CC(=O)C1=CC=CO1
Properties
C6H6O2
Molar mass 110.112 g·mol−1
Appearance Low melting solid
Density 1.0975 at 20 °C
Melting point 30 °C (86 °F; 303 K)
Boiling point 168 to 169 °C (334 to 336 °F; 441 to 442 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

2-Acetylfuran is a low melting solid or high boiling liquid, depending on temperature.[1][2] The solid melts at 30 °C and has a density of 1.0975 g/ml at 20 °C, while the normal boiling point of the liquid is 168–169 °C.[3] 2-Acetylfuran is a useful intermediate in the synthesis of fine chemicals and pharmaceuticals, and is used in the production of the generic cephalophosphorin antibiotic cefuroxime.[4]

Synthesis

2-Acetylfuran was prepared by Ashina in 1914 via the reaction of the methyl Grignard reagent on 2-furonitrile.[5]

Applications

Pharmaceuticals

A one-pot synthesis of an intermediate to the HIV integrase inhibitor S-1360 was based on the Friedel-Crafts alkylation of 2-acetylfuran with 4-fluorobenzyl chloride using zinc chloride catalyst.[6]

Reaction of 2-acetylfuran with aqueous sodium nitrite gave 2-furanyloxoacetic acid, an intermediate to Cefuroxime, a second-generation cephalosporin antibiotic.[7]

References

  1. ^ Howard D. Hartough; Kosak, Alvin I. (1948). "Acylation of thiophene and furan by means of boron trifluoride. VII". Journal of the American Chemical Society. 70: 867. doi:10.1021/ja01182a510.
  2. ^ Walther Borsche; Leditschke, Heinrich; Lange, Karl (1938). "Cleavage of the furan ring by primary aromatic amines and hydrochloric acid". Berichte der Deutschen Chemischen Gesellschaft [Abteilung] B: Abhandlungen. 71B: 957–66.
  3. ^ Y. Asahina; Murayama, Y. (1914). "Ethereal oil of Elsholtzia cristata Willdenow (Lablatae)". Archiv der Pharmazie. 252: 435–48.
  4. ^ Rong-geng Wang; Liu, Cheng-ping; Zhu, Kun-peng; Du, Hai-lin; Liu, Lie-yi (2004). "Side chain of cefuroxime: (Z)-2-methoxyimino-2-(fury-2-yl)acetic acid ammonium salt". Jingxi Yu Zhuanyong Huaxuepin. 12 (17): 10–11.
  5. ^ Asahina, Y.; Murayama, Y. (1914). "Ethereal oil of Elsholtzia cristata Willdenow (Lablatae)". Archiv der Pharmazie. 252: 435–48.
  6. ^ Kenji Izumi; Kabaki, Mikio; Uenaka, Masaaki; Shimizu, Sumio (2007). "One-Step Synthesis of 5-(4-Fluorobenzyl)-2-furyl Methyl Ketone: A Key Intermediate of HIV-Integrase Inhibitor S-1360". Organic Process Research & Development. 11 (6): 1059–1061. doi:10.1021/op700117q.
  7. ^ Rui-min Lv; Zhang, Zhi-de; Zhang, Zhi-cheng (2005). "The research for the synthesis of 2-methoxyimino-2-furylacetic acid". Shandong Huagong. 34 (6): 5–8.
Retrieved from "https://en.wikipedia.org/w/index.php?title=2-Acetylfuran&oldid=707099270"