Jump to content

75 mm gun M1917

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by InternetArchiveBot (talk | contribs) at 19:06, 26 September 2018 (Rescuing 1 sources and tagging 0 as dead. #IABot (v2.0beta9)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

75 mm gun Model of 1917
TypeField gun
Place of originUnited States
Service history
In service1918 - 1945
Used byUnited States
United Kingdom
Finland
Greece
Philippine Commonwealth
WarsWorld War II
Continuation War
Production history
Designed1917
Produced1917
Specifications
MassGun & Breech: 995 lb (451 kg)
Total: 2,890 lb (1,310 kg)
Barrel lengthBore: 7 ft (2.1 m) L/28
Total: 7 ft 4 in (2.24 m)

ShellFixed QF 75 x 350mm R[1]
Shell weight16 lb (7.3 kg) (Shrapnel)
12.3 lb (5.6 kg) (HE)
Calibre75 mm (2.95 in)
Recoilhydro - spring 45-49 inches
Carriagewheeled, pole trail
Muzzle velocity1,693 ft/s (516 m/s) (Shrapnel)
1,900 ft/s (580 m/s) (HE)
Effective firing range6,494 yd (5,938 m) (Shrapnel)
8,100 yd (7,400 m)
(HE short fuze)
7,450 yd (6,810 m)
(HE long fuze)

The 75 mm Gun Model of 1917 (British) was an interim measure, based on the British QF 18 pounder, produced by the United States in World War I after it had decided to switch from 3-inch (76 mm) to 75 mm calibre for its field guns.

History

The US decided early in World War I to switch from 3-inch (76 mm) to 75 mm calibre for its field guns. Its preferred gun for re-equipment was the French 75 mm Model of 1897, but early attempts to produce it in the US using US commercial mass-production techniques failed, partly due to delays in obtaining necessary French plans, and then their being incomplete or inaccurate, and partly because US industry was not equipped to work to Metric measurements.[2] By 1917 US firms had produced 851 QF 18 pounders for export to Britain. Hence production of a 75 mm version offered a simple interim solution, being basically a copy of the British QF 18 pounder rechambered for French 75 mm ammunition, utilizing existing production capacity.[3] It remains very similar to the 18 pounder, the main visible difference being a shorter barrel with straight muzzle.

The gun was developed too late to see action in World War I.

Finnish service

Finland purchased 200 old guns from the United States for its Winter War against the USSR in 1940. They arrived too late to be used in that war but were designated "75 K/17 " and after necessary overhaul were used in the Continuation War from 1941, and many continued in use for training until the 1990s.[4]

British service

British airmen man a 75mm field gun during training at No. 2 RAF Regiment School, Whitley Bay, Northumberland, UK, during World War II

Early in World War II Britain lost many of its field guns in France, and the US transferred its large remaining stocks of the Model of 1917 to Britain where its similarity to the 18 pounder made it useful for British home defence and training needs. Its British designation was "Ordnance QF 75mm on Carriage, 75mm /18 pr Mark 1PA".

Greek service

The gun entered in Greek service during the Greco-Italian war of 1940-1941. Greece requested aid from Britain and USA, which in part came in the form of the British 75mm field gun. A total of 50 by Britain in January and 24 by the US in March 1941 were offered. Of those, 24 were sent from Britain, but only 18 arrived in January 1941 to Greece. The rest of the offered guns were either sunk or never loaded on ships due to the fall of Greece in April 1941. The 18 that arrived to Greece were in need of maintenance before being pressed into service. Ultimately 4 guns saw service with the 19th Field Artillery Battalion, and 12 guns with the B3 Field Artillery Battalion.[5]

See also

Surviving examples

"Minnie" at United States Army Ordnance Museum, MD

Notes

  1. ^ "75-77 MM CALIBRE CARTRIDGES". www.quarryhs.co.uk. Retrieved 2017-09-05.
  2. ^ Brown 1920, Pages 50 - 56
  3. ^ "The model of 1917 (British) was ordered shortly after the declaration of war [April 1917] to expedite production, inasmuch as the Bethlehem Steel Co. had orders for this type of gun and carriage from the British Government, and was in a position to proceed with the manufacture according to drawings, specifications, and gauges already on hand" Wade, 1919, page 17
  4. ^ http://www.jaegerplatoon.net/ARTILLERY3.htm#75K17
  5. ^ Εφοδιασμοί του Στρατού εις Υλικά Οπλισμού και Πυρομαχικών Πυροβολικού και Πεζικού κατά τον Πόλεμον 1940-41, Έκδοσις Διευθύνσεως Ιστορίας Στρατού, Αθήναι 1982, pages 49-50 and 67-68

References

United States War Department Forms (of Ordnance, many guns manuals)