Vortex86
The Vortex86 is a computing system-on-a-chip (SoC) based on a core compatible with the x86 microprocessor family. It is produced by DM&P Electronics, but originated with Rise Technology.
History
Vortex86 previously belonged to SiS, which got the basic design from Rise Technology.[1] SiS sold it to DM&P Electronics[2] in Taiwan.
Before adopting the Vortex86 series, DM&P manufactured the M6117D, an Intel 386SX compatible, 25–40 MHz SoC.[3][4]
CPU
This section possibly contains original research. (July 2012) |
Vortex86 CPUs implement the IA-32 architecture but which instructions are implemented varies depending on the model. Vortex86SX[5] and the early versions of Vortex86[citation needed] do not have a floating point unit (FPU). Any code that runs on i586 but does not use floating point instructions will run on these models. Any i586 code will run on Vortex86DX and later. Some Linux kernels (by build-time option) emulate the FPU on any CPU that is missing one, so a program that uses i586-level floating point instructions will work on any Vortex86 family CPU under such a kernel, albeit more slowly on a model with no FPU. The more advanced models have FPUs that have i686-level instructions, such as fucomi[citation needed].
Code intended for i686 may fail on some models because they lack a Conditional Move (CMOV) instruction. Compilers asked to optimize code for a more advanced CPU (for example the GNU Compiler with its -march=i686 option) generate code that uses CMOV. Linux systems intended to run on i686 are generally not compatible with these Vortex86 models because the GNU C Library, when built for i686, uses a CMOV instruction in its assembly language strcmp function, which its dynamic loader (ld.so) uses. Hence, no program that uses shared libraries can execute.
Below are the properties of a Vortex86 original CPU reported by the Linux kernel tool /proc/cpuinfo
.
Note that this CPU is a later version with an FPU.
processor : 0 vendor_id : SiS SiS SiS cpu family : 5 model : 0 model name : 05/00 stepping : 5 cpu MHz : 199.978 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu tsc cx8 mmx up bogomips : 399.95 clflush size : 32 cache_alignment : 32 address sizes : 32 bits physical, 32 bits virtual power management:
Compatible Components
DM&P maintained an embedded Linux distribution customized to use the SoCs features.[6] Other operating systems are supported depending on the SoC model and may include various RTOS systems like QNX and VxWorks, Linux distributions,[7] FreeBSD[8] or various versions of Microsoft Windows systems like Windows Embedded Compact or Windows IoT.[9]
Versions
Vortex86 original
SiS55x/Rise mP6 or simply Vortex86 – developed by SiS, three integer and MMX pipelines, branch prediction.[10]
Vortex86SX
300 MHz, 16 KB Data + 16 KB Instruction L1 cache, no FPU, no L2 cache. Can use both SD and DDR2 RAM.[11]
Vortex86DX
600 MHz to 1 GHz (2.02 W @ 800 MHz [12]), 16 KB Data + 16 KB Instruction L1 cache, FPU, 256 KB L2 cache, 6-staged pipeline. Can address up to 1 GiB DDR2 RAM[13][14] The PDX-600 is a version of the Vortex86DX that only differs in the number of RS-232 ports (3 instead of 5) and has no I²C and servo controllers, thus targeting more the embedded than the industrial market. Netbooks similar to the Belco 450R use this chip.[15]
The package is a single 581-pin BGA package.
Vortex86MX
1 GHz, the CPU core itself hardly differs from the Vortex86DX, but according to several sources, the processor does appear to have implemented SIMD multi-media instructions (MMX).[16][17][18] This version drops conformance to ISA and integrates a GPU and a HD Audio controller, it also integrates a UDMA/100 IDE controller. The consumer grade version is known as the PMX-1000.[19] Current models of the Gecko Edubook use the Xcore86, a rebadge of the Vortex86MX.[19]
Vortex86MX+
This has a 32KB write through 2-way L1 cache, 256KB write through/write back 4-way L2 cache, PCI rev. 2.1 32-bit bus interface at 33 MHz, DDR2, ROM controller, IPC (Internal Peripheral Controllers with DMA and interrupt timer/counter included), Fast Ethernet, FIFO UART, USB2.0 Host and ATA controller. The MX+ Adds a VGA controller on chip with shared memory.
The package is a single 720-pin BGA package.
Vortex86DX2
This has a 32KB write through 4-way L1 cache (16K Instruction + 16K Data), 256KB write through/write back 4-way L2 cache, PCI rev. 2.1 32-bit bus interface at 33 MHz, DDR2, ROM controller, IPC (Internal Peripheral Controllers with DMA and interrupt timer/counter included), VGA, 100 Mbps ethernet, FIFO UART, USB2.0 Host and ATA controller. Enhancements over the DX include more COM ports (9), 2GB of RAM, and an HD Audio codec, as well as more GPIO pins.
The package is a single 720-pin BGA package.
Vortex86EX
This has a 32KB write through 2-way L1 cache, 128KB write through/write back 2-way L2 cache, PCI-e bus interface, 300 MHz DDR3, ROM controller, IPC (Internal Peripheral Controllers with DMA and interrupt timer/counter included), Fast Ethernet, FIFO UART, USB2.0 Host and ATA controller.
The package is a single 288-pin TFBGA-package.
Vortex86DX3
This has a 1.0 GHz dual-core i686-compatible CPU.[20][21] It has an eight-way 32K I-Cache, an eight-way 32K D-Cache, a four-way 512 KB L2 cache with a write-through or write-back policy, support for up to 2GB of DDR3 RAM, a PCI-e bus interface, 100 Mbps Ethernet, FIFO UART, a USB 2.0 host, integrated GPU, an ATA controller that has an IDE controller, PATA 100 (2x HDD) or 2x SD at Primary Channel, and SATA 1.5Gbit/s (1 Port) at Secondary Channel.
The package is a single 720-pin BGA-package.[22]
Vortex86EX2
The EX2 model has two asymmetrical master/slave CPU cores.[23] The master core runs at 600 MHz, has 16K I-Cache, 16K D-Cache, and four-way 128 KB L2 cache with a write-through or write-back policy. The slave core operates at 400 MHz and also has 16KB I-Cache, 16KB D-Cache, but has no L2 cache. Both have a built-in FPU. Maximum DDR3 RAM capacity is 2GB. ECC memory is also supported. It is produced using the 65 nm manufacturing process[24] and uses the 19x19mm LFBGA-441 package.
See also
External links
- DM&P Electronics official website
- Vortex86 Series overview
- Change CPU speed in DOS, Linux, Windows[permanent dead link]
References
- ^ Cebit 2007: x86 Minisystem mit Vortex86SX[permanent dead link] (german)
- ^ Vortex86 Envision Embedded Design with Windows Embedded Technologies (archived copy)
- ^ M6117D Data Sheet
- ^ "M6117D overview". Archived from the original on 2009-03-03. Retrieved 2009-04-09.
- ^ DM&P Vortex86SX FAQ
- ^ X-Linux
- ^ Vortex86 Series Linux Support List
- ^ VEX2-6427 Datasheet
- ^ Vortex86 Series Windows Support List
- ^ Vortex86 Data Sheet [dead link]
- ^ Vortex86SX Data Sheet (archived copy)
- ^ Vortex86DX overview (archived copy)
- ^ Vortex86DX documentation
- ^ Vortex86DX Data Sheet
- ^ engadget - "The world's cheapest laptop"
- ^ Thomas, Alexander (November 2012). "BTplug Review". Dr. Lex' Site. Retrieved 2012-02-13.
- ^ Kauler, Barry (2010-01-16). "Xcore86 CPU in Gecko Edubook". Barry's Blog. Archived from the original on 2015-02-13. Retrieved 2015-02-13. — See blog comments for more information.
- ^ LoneRifle (2010-01-22). "CPU Features". Flickr. Retrieved 2015-02-13.
- ^ a b Angel, Jonathan (2008-12-11). "X86 system-on-chip adds VGA graphics". LinuxForDevices. Archived from the original on 2012-09-12. Retrieved 2009-12-11.
- ^ http://www.compactpc.com.tw/products/about OS support list
- ^ Vortex86DX3 product overview
- ^ http://www.cnx-software.com/2015/04/09/vortex86dx3-is-a-new-x86-soc-for-embedded-systems/
- ^ Vortex86EX2 product overview
- ^ ICOP Vortex86 SoC website