Jump to content

Coagulase

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by ZI Jony (talk | contribs) at 14:48, 8 January 2022 (clean up). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

S. aureus uses coagulase to form a fibrin coat from fibrinogen present in the bloodstream. This helps the bacteria evade detection and phagocytosis by the immune system.

Coagulase is a protein enzyme produced by several microorganisms that enables the conversion of fibrinogen to fibrin. In the laboratory, it is used to distinguish between different types of Staphylococcus isolates. Importantly, S. aureus is generally coagulase-positive, meaning that a positive coagulase test would indicate the presence of S. aureus or any of the other 11 coagulase-positive Staphylococci.[1] A negative coagulase test would instead show the presence of coagulase-negative organisms such as S. epidermidis or S. saprophyticus. However, it is now known that not all S. aureus are coagulase-positive.[2][3] Whereas coagulase-positive Staphylococci are usually pathogenic, coagulase-negative Staphylococci are more often associated with opportunistic infection.[4]

It is also produced by Yersinia pestis.[5]

Coagulase reacts with prothrombin in the blood. The resulting complex is called staphylothrombin, which enables the enzyme to act as a protease to convert fibrinogen, a plasma protein produced by the liver, to fibrin. This results in clotting of the blood. Coagulase is tightly bound to the surface of the bacterium S. aureus and can coat its surface with fibrin upon contact with blood. The fibrin clot may protect the bacterium from phagocytosis and isolate it from other defenses of the host.[6] The fibrin coat can therefore make the bacteria more virulent. Bound coagulase is part of the larger family of MSCRAMM adhesin proteins.

Coagulase test

The coagulase test has traditionally been used to differentiate Staphylococcus aureus from coagulase-negative staphylococci. S.aureus produces two forms of coagulase (i.e., bound coagulase and free coagulase). Bound coagulase, otherwise known as "clumping factor", can be detected by carrying out a slide coagulase test, and free coagulase can be detected using a tube coagulase test.

Slide test

A slide coagulase test is run with a negative control to rule out autoagglutination. Two drops of saline are put onto the slide labeled with sample number, Test (T) and control (C). The two saline drops are emulsified with the test organism using a wire loop, straight wire, or wooden stick. A drop of plasma (rabbit plasma anticoagulated with EDTA is recommended)[7] is placed on the inoculated saline drop corresponding to test, and mixed well, then the slide is rocked gently for about 10 seconds.

  • If 'positive', macroscopic clumping would be observed in the plasma within 10 seconds, with no clumping in the saline drop.
  • If 'negative', no clumping will be observed.

If the slide coagulase test is negative, a tube test should follow as a confirmation. Clumping in both drops is an indication of autoagglutination, so a tube test should be carried out. Tube test is not performed each institutions but most of the result depends on blood cultures from lab.

Tube test

A fibrin clot formed in a test tube by the coagulase reaction

The tube test uses rabbit plasma that has been inoculated with a staphylococcal colony (i.e., Gram-positive cocci which are catalase positive). The tube is then incubated at 37 °C for 1.5 hours. If negative, then incubation is continued up to 18 hours.

  • If 'positive' (e.g., the suspect colony is S. aureus), the plasma will coagulate,[8] resulting in a clot (sometimes the clot is so pronounced, the liquid will completely solidify).
  • If 'negative', the plasma remains a liquid. The negative result may be S. epidermidis but only a more detailed identification test can confirm this, using biochemical tests as in analytical profile index tests methods. A false negative can be perceived if the sample is not allowed to cool for about 30 minutes at room temperature or 10 minutes in the freezer, given that the serum can melt. If truly negative, the serum will remain liquid after cooling.
  • List of coagulase-positive staphylococci: Staphylococcus aureus subsp. anaerobius, S. aureus subsp. aureus, S. delphini, S. hyicus, S. intermedius, S. lutrae, and Staphylococcus schleiferi subsp. coagulans.
  • List of coagulase-negative staphylococci of clinical significance: S. saprophyticus, S.cohnii subsp. cohnii, S. cohnii subsp. urealyticum, S. captitus subsp. captitus, S. warneri, S.hominis, S.epidermidis, S. caprae, and S.lugdunensis

References

  1. ^ Becker et al., 2014. PMID 25278577
  2. ^ Ryan KJ, Ray CG (editors) (2004). Sherris Medical Microbiology (4th ed.). McGraw Hill. ISBN 0-8385-8529-9.
  3. ^ PreTest, Surgery, 12th ed., p.88
  4. ^ González-Martín M, Suárez-Bonnet A, Tejedor-Junco MT (2020). "Virulence factors in coagulase-positive staphylococci of veterinary interest other than Staphylococcus aureus". Veterinary Quarterly. 40 (1): 118–131. doi:10.1080/01652176.2020.1748253. PMC 7178840. PMID 32223696.
  5. ^ "coagulase" at Dorland's Medical Dictionary
  6. ^ Tortora, Gerard J.; Funke, Berdell R.; Case, Christine L. (2013). Microbiology: An Introduction (11 ed.). Glenview, IL: Pearson Education Inc. p. 434. ISBN 978-0-321-73360-3.
  7. ^ A.Forbes, Betty; Daniel F.Sahm; Alice S.Weissfeld (1998). BAILEY& SCOTT'S Diagnostic Microbiology (Tenth ed.). Don Ladig. pp. 430–431. ISBN 0-8151-2535-6.
  8. ^ "coagulase test" at Dorland's Medical Dictionary
Retrieved from "https://en.wikipedia.org/w/index.php?title=Coagulase&oldid=1064471230"