Mikulin AM-3
Appearance
AM-3 | |
---|---|
Type | Turbojet |
National origin | Soviet Union |
Designer | Alexander Mikulin |
Major applications |
The Mikulin AM-3 (also called RD-3M) was a turbojet engine developed in the Soviet Union by Alexander Mikulin.[1]
Design and development
The development of the high-performance single-shaft engine began in 1948. The engine was used in different versions for the Tupolev Tu-16 and Tu-104, as well as the Myasishchev M-4. It had a single-stage low-pressure and an eight-stage high-pressure compressor, powered by a two-stage high-pressure turbine.
Variants
- AM-3
- first series version
- AM-3A
- AM-3D
- Version for M-4 with 85.6 kN (19,200 lbf) thrust
- AM-3M-200
- AM-3M-500, AM-3M-500A: developed further versions with 93.1 kN (20,900 lbf)
- WP-8
- Chinese copy of the AM-3 with 93.1 kN (20,900 lbf) thrust for the Xian H-6 (reproduction of the Tu-16)
Specifications
General characteristics
- Type: Turbojet engine
- Length: 5,380 mm (212 in)
- Diameter: 1,400 mm (55 in)
- Dry weight: 3,100 kg (6,800 lb)
Components
- Compressor: axial-flow, single stage LP, 8-stage HP
- Combustors: 14 x can combustion chambers
- Turbine: axial-flow, 2-stages
Performance
- Maximum thrust: 85.3 kN (19,200 lbf)
- Overall pressure ratio: 6.4
- Turbine inlet temperature: 860°C
- Specific fuel consumption: 93.2 kg/(kN•h)
- Thrust-to-weight ratio: 2.81
See also
Comparable engines
Related lists
References
Wikimedia Commons has media related to Mikulin AM-3.
- Notes
- ^ Gunston 1989, p. 104.
- Bibliography
- Gunston, Bill. World Encyclopaedia of Aero Engines. Cambridge, England. Patrick Stephens Limited, 1989. ISBN 1-85260-163-9
This aircraft engine article is missing some (or all) of its specifications. If you have a source, you can help Wikipedia by adding them. |