Row echelon form
In linear algebra, a matrix is in row echelon form if it can be obtained as the result of Gaussian elimination. In particular, every matrix can be put in row echelon form by a succession of elementary row operations. The term echelon comes from the French "échelon" ("level" or step of a ladder), and refers to the fact that the nonzero entries of a matrix in row echelon form look like an inverted staircase.[citation needed]
For square matrices, an upper triangular matrix with nonzero entries on the diagonal is in row echelon form, and a matrix in row echelon form is (weakly) upper triangular. Thus, the row echelon form can be viewed as a generalization of upper triangular form for rectangular matrices.
A matrix is in reduced row echelon form if it is in row echelon form, the first nonzero entry of each row is equal to and the ones above it within the same column equal . The reduced row echelon form of a matrix is unique and does not depend on the sequence of elementary row operations used to obtain it. The variant of Gaussian elimination that transforms a matrix to reduced row echelon form is sometimes called Gauss–Jordan elimination.
A matrix is in column echelon form if its transpose is in row echelon form. So, all properties of column echelon forms can be easily deduced from the corresponding properties of row echelon forms. Therefore, only row echelon forms are considered in the remainder of the article.
(General) row echelon form
A matrix is in row echelon form if
- All rows having only zero entries are at the bottom.[1]
- The leading entry (that is, the left-most nonzero entry) of every nonzero row, called the pivot, is on the right of the leading entry of every row above.[2]
Some texts add the condition that the leading coefficient must be 1[3] while others require this only in reduced row echelon form.
These two conditions imply that all entries in a column below a leading coefficient are zeros.[4]
The following is an example of a matrix in row echelon form, but not in reduced row echelon form (see below):
Many properties of matrices may be easily deduced from their row echelon form, such as the rank and the kernel.
Reduced row echelon form
A matrix is in reduced row echelon form (also called row canonical form) if it satisfies the following conditions:[5]
- It is in row echelon form.
- The leading entry in each nonzero row is 1 (called a leading one).
- Each column containing a leading 1 has zeros in all its other entries.
For a matrix in row echelon form, the last condition is equivalent to
- Each column containing a leading 1 has zeros in all entries above the leading 1.
While a matrix may have several echelon forms, its reduced echelon form is unique.
Given a matrix in reduced row echelon form, if one permutes the columns in order to have the leading 1 of the ith row in the ith column, one gets a matrix of the form
where I is an identity matrix, X is a matrix with the same number of rows as I, and the two 0's are zero matrices of appropriate size. However, since a permutation of columns is not a row operation, the resulting matrix is inequivalent.
Systems of linear equations
A system of linear equations is said to be in row echelon form if its augmented matrix is in row echelon form. Similarly, a system of linear equations is said to be in reduced row echelon form or in canonical form if its augmented matrix is in reduced row echelon form.
The canonical form may be viewed as an explicit solution of the linear system. In fact, the system is inconsistent if and only if one of the equations of the canonical form is reduced to 0 = 1; that is if there is a leading 1 in the column of the constant terms[6] Otherwise, regrouping in the right hand side all the terms of the equations but the leading ones, expresses the variables corresponding to the pivots as constants or linear functions of the other variables, if any.
Transformation to row echelon form
Gaussian elimination is the main algorithm for transforming every matrix into a matrix in row echelon form. A variant, sometimes called Gauss–Jordan elimination produces a reduced row echelon form. Both consist of a finite sequence of elementary row operations; the number of required elementary row operations is at most mn for an m-by-n matrix.[7] For a given matrix, despite the row echelon form not being unique, all row echelon forms, including the reduced row echelon form, have the same number of zero rows and the pivots are located in the same positions.[7]
This is an example of a matrix in reduced row echelon form, which shows that the left part of the matrix is not always an identity matrix:
For a matrix with integer coefficients, the Hermite normal form is a row echelon form that can be calculated without introducing any denominator, by using Euclidean division or Bézout's identity. The reduced echelon form of a matrix with integer coefficients generally contains non-integer coefficients, because of the need of dividing by its leading coefficient each row of arow echelon form.
The non-uniqueness of the row echelon form of a matrix follows from the fact that some elementary row operations transform a matrix in row echelon form into another (equivalent) matrix that is also in row echelon form. These elementary row operations include the multiplication of a row by a nonzero scalar and the addition of a scalar multiple of a row to one of the above rows. For example:
In this example, the unique reduced row echelon form can be obtained by subtracting three times the second row from the first row :
Affine spaces of reduced echelon forms
In this section and the following one, we denote the location of the columns containing the leading entries of the successive rows of a matrix in reduced row echelon form as , with
where is the dimension of the row space of the matrix. The data will be called the shape of , which has leading non-zero entries , the entries in the column above and below it vanish, and so do all those to the left of it within the same row, as well as all entries in the th row for :
Since all other entries are arbitrary elements of the base field , the set of all reduced echelon form matrices with shape is a K-affine space of dimension[8][9]
To see this, note that, of the possible matrix entries within the first rows, are determined as 's and 's because they are in the columns containing the pivots. A further are also required to be , because they are to the left of the pivots, but of these,
are also in the columns . Therefore, the total number of entries that are not fixed to be equal to or is
Maximal rank: Schubert cells
![]() | This section may be too technical for most readers to understand.(October 2023) |
If , the matrices in are of maximal rank , and determine -dimensional subspaces of the free -module , as the span
of linear combinations
of the elementary basis vectors , with coefficients equal to the row vectors. In this case, the affine space is the Schubert cell[8][9] of the Grassmannian , consisting of -dimensional subspaces of corresponding to the integer partition
with parts equal to
relative to the complete flag
where
This means that consists of those -dimensional subspaces whose intersections with the subspaces have dimensions
Its dimension is then equal to the weight of the partition[8]
Notes
- ^ Phrased in terms of each individual zero row in Leon (2010, p. 13):"A matrix is said to be in row echelon form ... (iii) If there are rows whose entries are all zero, they are below the rows having nonzero entries."
- ^ Leon (2010, p. 13):"A matrix is said to be in row echelon form ... (ii) If row k does not consist entirely of zeros, the number of leading zero entries in row is greater than the number of leading zero entries in row k."
- ^ See, for instance, the first clause of the definition of row echelon form in Leon (2010, p. 13): "A matrix is said to be in row echelon form (i) If the first nonzero entry in each nonzero row is 1."
- ^ Meyer 2000, p. 44
- ^ Meyer 2000, p. 48
- ^ Cheney, Ward; Kincaid, David R. (2010-12-29). Linear Algebra: Theory and Applications. Jones & Bartlett Publishers. pp. 47–50. ISBN 9781449613525.
- ^ a b Anton, Howard; Rorres, Chris (2013-10-23). Elementary Linear Algebra: Applications Version, 11th Edition. Wiley Global Education. p. 21. ISBN 9781118879160.
- ^ a b c Fulton, William (1997). Young Tableaux. With Applications to Representation Theory and Geometry, Chapt. 9.4. London Mathematical Society Student Texts. Vol. 35. Cambridge, U.K.: Cambridge University Press. doi:10.1017/CBO9780511626241. ISBN 9780521567244.
- ^ a b Kleiman, S.L.; Laksov, Dan (1972). "Schubert Calculus". American Mathematical Monthly. 79 (10). American Mathematical Society: 1061–1082. doi:10.1080/00029890.1972.11993188. ISSN 0377-9017.
References
- Leon, Steven J. (2010), Lynch, Deirdre; Hoffman, William; Celano, Caroline (eds.), Linear Algebra with Applications (8th ed.), Pearson, ISBN 978-0-13-600929-0,
A matrix is said to be in row echelon form (i) If the first nonzero entry in each nonzero row is 1. (ii) If row k does not consist entirely of zeros, the number of leading zero entries in row is greater than the number of leading zero entries in row k. (iii) If there are rows whose entries are all zero, they are below the rows having nonzero entries.
. - Meyer, Carl D. (2000), Matrix Analysis and Applied Linear Algebra, SIAM, ISBN 978-0-89871-454-8.
External links
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/df/Wikibooks-logo-en-noslogan.svg/40px-Wikibooks-logo-en-noslogan.svg.png)