Jump to content

Lambda diode

Edit links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 2607:fea8:98e0:209:c5ce:b71d:c877:9ee7 (talk) at 01:49, 6 October 2019 (Specified that they're made using JFETs. The original wording of "field effect transistor implied that these could be made with a pair of complimentary MOSFETs or JFETs.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

An n-channel JFET (top) and a p-channel JFET combine to form a lambda-diode circuit

A lambda diode is an electronic circuit that combines a complementary pair of junction gated field effect transistors into a two-terminal device that exhibits an area of differential negative resistance much like a tunnel diode. The term refers to the shape of the V–I curve of the device, which resembles the Greek letter λ (lambda).

Lambda diodes work at higher voltage than tunnel diodes. Whereas a typical tunnel diode[1] may exhibit negative differential resistance approximately between 70 mV and 350 mV, this region occurs approximately between 1.5 V and 6 V in a lambda diode due to the higher pinch-off voltages of typical JFET devices. A lambda diode therefore cannot replace a tunnel diode directly.

Moreover, in a tunnel diode the current reaches a minimum of about 20% of the peak current before rising again towards higher voltages. The lambda diode current approaches zero as voltage increases, before rising quickly again at a voltage high enough to cause gate–source Zener breakdown in the FETs.

It is also possible to construct a device similar to a lambda diode by combining an n-channel JFET with a PNP bipolar transistor.[2] A suggested modulatable variant but is a bit more difficult to build uses a PNP based optocoupler and can be tweaked by using its IR diode. This has the advantage that its properties can be fine tuned with a simple bias driver and used for high sensitivity radio applications, sometimes a modified open can PNP transistor with IR LED can be used instead.

Applications

Like the tunnel diode, the negative resistance aspect of the lambda diode lends itself naturally to application in oscillator circuits[3] and amplifiers. In addition, bistable circuits such as memory cells have been described.[4]

References

  1. ^ 1N3712 data sheet.
  2. ^ Oscillations and Regenerative Amplification using Negative Resistance.
  3. ^ A Dip Meter Using the Lambda Negative Resistance Circuit. Lloyd Butler, Amateur Radio, January 1997.
  4. ^ United States Patent 4376986: Double Lambda diode memory cell; http://www.wipo.int/pctdb/images4/PCT-PAGES/1983/091983/83001335/83001335.pdf.

Literature

  • Graf, Rudolf F. (1999). Modern Dictionary of Electronics, 7th ed. Boston [etc.]: Newnes Press. p. 411. ISBN 0-7506-9866-7.
Stub icon

This electronics-related article is a stub. You can help Wikipedia by expanding it.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Lambda_diode&oldid=919824814"