Chloromethyl methyl ether
Names | |
---|---|
IUPAC name
Chloro(methoxy)methane
| |
Other names
MOM-Cl, CMME, MCD, Chlorodimethyl ether, Chloromethoxymethane, Dimethylchloroether, Methylchloromethyl ether
| |
Identifiers | |
3D model (JSmol)
|
|
ChemSpider | |
ECHA InfoCard | 100.003.165 |
EC Number |
|
KEGG | |
PubChem CID
|
|
RTECS number |
|
UNII | |
UN number | 1239 |
CompTox Dashboard (EPA)
|
|
| |
| |
Properties | |
C2H5ClO | |
Molar mass | 80.51 g·mol−1 |
Appearance | Colorless liquid |
Odor | Irritating and acrid |
Density | 1.06 g/mL |
Melting point | −103.5 °C (−154.3 °F; 169.7 K) |
Boiling point | 55–57 °C (131–135 °F; 328–330 K) |
reacts | |
Solubility | Soluble in alcohol and diethylether |
Vapor pressure | 192 mmHg (21°C)[2] |
Hazards | |
Occupational safety and health (OHS/OSH): | |
Main hazards
|
Carcinogen & Irritant |
GHS labelling: | |
Danger | |
H225, H302, H312, H319, H332, H350 | |
P201, P202, P210, P233, P240, P241, P242, P243, P261, P264, P270, P271, P280, P281, P301+P312, P302+P352, P303+P361+P353, P304+P312, P304+P340, P305+P351+P338, P308+P313, P312, P322, P330, P337+P313, P363, P370+P378, P403+P235, P405, P501 | |
NFPA 704 (fire diamond) | |
Flash point | 0 °C (32 °F; 273 K) (open cup)[2] |
NIOSH (US health exposure limits): | |
PEL (Permissible)
|
OSHA-Regulated Carcinogen, no PEL[2] |
REL (Recommended)
|
Carcinogenic[2] |
IDLH (Immediate danger)
|
N.D.[2] |
Safety data sheet (SDS) | Safety Data Sheet Archived |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Chloromethyl methyl ether (CMME) is a compound with formula CH3OCH2Cl. It is a chloroalkyl ether. It is used as an alkylating agent and industrial solvent to manufacture the detergent dodecylbenzyl chloride, water repellents and ion-exchange resins. In organic synthesis, it is used for introducing the methoxymethyl (MOM) protecting group,[3] and is thus often called MOM-Cl or MOM chloride. It also finds application as a chloromethylating agent in some variants of the Blanc chloromethylation.
A convenient and reliable method to prepare chloromethyl methyl ether in situ is by combining dimethoxymethane and acetyl chloride, either neat or as a solution in an inert solvent like toluene, in the presence of zinc bromide (0.0001 equiv) as a catalytic Lewis acid.[4][5] This mixture affords a solution of chloromethyl methyl ether of high purity (>95%) in methyl acetate which can be used directly in many applications. A very similar method, using a high-boiling acyl chloride, can be used to prepare pure material. After simple distillation, this method yields >93% pure material with dimethoxymethane as the only contaminant.[6] In contrast, the classical procedure reported in Organic Syntheses employing formaldehyde, methanol and hydrogen chloride yields material contaminated with a significant amount of the dangerous bis(chloromethyl) ether and requires fractional distillation.[7]
The amount of time required to destroy residual chloromethyl methyl ether using various standard aqueous quench solutions (ammonium chloride solution, water, and sodium carbonate solution) has been measured. In all cases, a solution of chloromethyl methyl ether in toluene/methyl acetate was destroyed (to within detection limit) after vigorous stirring with the quench solution for 15 minutes.[5]
CMME is a known human carcinogen.[8] Chronic exposure can increase the incidence of respiratory cancers, including small cell carcinoma.[9] It is one of 13 chemicals regulated by the Occupational Safety and Health Administration despite not having an established permissible exposure limit.[10][11]
It is classified as an extremely hazardous substance in the United States as defined in Section 302 of the U.S. Emergency Planning and Community Right-to-Know Act (42 U.S.C. 11002), and is subject to strict reporting requirements by facilities which produce, store, or use it in significant quantities.[12] It listed in Schedule 1 Part 1 of Canada's Prohibition of Certain Toxic Substances Regulations.[13]
References
- ^ Sigma-Aldrich
- ^ a b c d e NIOSH Pocket Guide to Chemical Hazards. "#0129". National Institute for Occupational Safety and Health (NIOSH).
- ^ Protective Groups in Organic Synthesis, T. W. Greene and P. G. M. Green, 3rd Edition, pages 27-33. ISBN 0-471-16019-9
- ^ Synthesis of Alpha-Halo Ethers from Symmetric Acetals and In Situ Methoxymethylation of an Alcohol, Organic Syntheses, Vol. 84, No. 102 (2007)
- ^ a b Berliner, Martin A.; Belecki, Katherine (November 2005). "Simple, Rapid Procedure for the Synthesis of Chloromethyl Methyl Ether and Other Chloro Alkyl Ethers 1". The Journal of Organic Chemistry. 70 (23): 9618–9621. doi:10.1021/jo051344g. ISSN 0022-3263. PMID 16268645.
- ^ R.J. Linderman, M. Jaber, B.D. Griedel, J. Org. Chem. 1994, 59, 6499-6500.
- ^ Monochloromethyl ether, Organic Syntheses I, 377
- ^ bis(Chloromethyl) Ether and Technical-Grade Chloromethyl Methyl Ether CAS Nos. 542-88-1 and 107-30-2 Report on carcinogens, eleventh edition
- ^ "Chloromethyl methyl ether". U.S. Environmental Protection Agency, Integrated Risk Information System. 7 March 2011. Accessed 3 May 2011.
- ^ NIOSH Pocket Guide to Chemical Hazards
- ^ "40 C.F.R.: Appendix A to Part 355—The List of Extremely Hazardous Substances and Their Threshold Planning Quantities" (PDF) (July 1, 2008 ed.). Government Printing Office. Archived from the original (PDF) on February 25, 2012. Retrieved October 29, 2011.
{{cite journal}}
: Cite journal requires|journal=
(help) - ^ http://laws-lois.justice.gc.ca/PDF/SOR-2012-285.pdf