Jump to content

Sloper antenna

From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by Monkbot (talk | contribs) at 01:33, 6 January 2020 (Task 15: language icon template(s) replaced (2×);). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)

The Sloper Antenna is a slanted Dipole antenna.[1][2]

Advantages

[edit]

While horizontal dipoles required two large support masts, this antenna type only needs one large mast. It is therefore widely used by radio amateurs with limited space.[3] In particular for low frequencies this antenna form is interesting.[4] The angle of the slope is usually between 45°–60° and the lower end of the wire is at least 16 wavelength above the electrical ground.[3]

A sloper is typically fed with a coaxial cable in the center, at the top of the center support mast. At least 14 of the wavelength of feedline must be at 90° angle to the antenna.[3] It is also possible to feed the antenna asymmetrically.[5] Due to the low-angle radiation pattern this antenna has, it performs well for long distance contacts (QSOs) (DX).[3]

References

[edit]
  1. ^ Novice Antenna Notebook (D. DeMaw, W1FB)
  2. ^ (in German) Rund um die Antenne (M. Rüegger, HB9ACC)
  3. ^ a b c d Practical Wire Antennas (J. Heys, G3BDQ)
  4. ^ The 160 meter sloper system at K3LR in The ARRL Antenna Compendium Vol. 4
  5. ^ (in German) Reinprecht, K. OE5RI. Asymmetrisch gespeiste Sloper-Antennen