Jump to content

Socket 754

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Pancho507 (talk | contribs) at 13:39, 17 April 2020. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Socket 754
TypePGA-ZIF
Chip form factorsOPGA
Contacts754
FSB frequency200 MHz System clock
800 MHz HyperTransport
Voltage range0.8 - 1.55 V
ProcessorsAMD Athlon 64 (2800+ - 3700+)
AMD Sempron (2500+ - 3400+)
AMD Turion 64 (ML and MT)
AMD Mobile Athlon 64 (2800+ - 4000+)
PredecessorSocket A
SuccessorSocket 939

This article is part of the CPU socket series

Socket 754 is a CPU socket originally developed by AMD to supersede its Athlon XP platform (socket 462, also referred to as Socket A). Socket 754 was the first socket developed by AMD to support their new consumer version of the 64 bit microprocessor family known as AMD64.

Technical specifications

Socket 754 was the original socket for AMD's Athlon 64 desktop processors. Due to the introduction of newer socket layouts (i.e. Socket 939, Socket 940 and Socket AM2), Socket 754 became the more "budget-minded" socket for use with AMD Athlon 64 or Sempron processors. It differs from Socket 939 in several areas:

  • support for a single channel memory controller (64 bits wide) with a maximum of three unbuffered DIMMs, or four registered DIMMs
  • no dual channel support
  • lower HyperTransport speed (800 MHz Bi-Directional, 16 bit data path, up and downstream)
  • lower effective data bandwidth (9.6 GB/s)
  • lower motherboard manufacturing costs

Although AMD promoted Socket 754 as a budget platform on the desktop and encouraged mid- and high-end users to use newer platforms, Socket 754 remained for some time as AMD's high-end solution for mobile applications, (e.g. the HP zv6000 series). However, Socket S1 was released and superseded Socket 754 in the mobile CPU segment, with support for dual-core CPUs and DDR2 SDRAM.

Availability

Demonstration of a PGA-ZIF socket (AMD 754).

The first processors using Socket 754 came on the market in the second half of 2003. Socket 754 was phased out in favor of Socket 939 on desktops because of low sales. The socket remained in use for laptops until it was replaced by S1 in 2006.

See also

References


  • "Socket 754 Design and Qualification Requirements (rev 3.13)" (PDF). Advanced Micro Devices. Archived from the original (PDF) on 2007-01-25. Retrieved 2010-09-23.
  • AMD 754 Pin Package Functional Data Sheet