Jump to content

Type II secretion system

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Artoria2e5 (talk | contribs) at 09:49, 22 December 2020. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Type II secretion system
Identifiers
SymbolType II secretion system
PfamPF00263
TCDB3.A.5
OPM superfamily348
OPM protein5wln
Membranome430
Available protein structures:
Pfam  structures / ECOD  
PDBRCSB PDB; PDBe; PDBj
PDBsumstructure summary

The type 2 secretion system (often referred to as the type II secretion system or the T2SS) is protein secretion machinery found in various species of Gram-negative bacteria, including various human pathogens such as Pseudomonas aeruginosa and Vibrio cholerae.[1] The type II secretion system is one of six protein secretory systems that are commonly found in gram negative bacteria along with the type I secretion system, the type III secretion system, The type IV secretion system, the chaperone/usher pathway, the autotransporter pathway/type V secretion system and the type VI secretion system (some bacteria also utilize the type VII secretion system).[2] Like these other systems, the type II secretion system enables the transport of cytoplasmic proteins across the lipid bilayers that make up the cell membranes in gram negative bacteria.

Overview

The type II secretion system is a membrane bound protein complex found in Gram-negative bacteria that is used to secrete proteins found in the cytoplasm of the bacteria into the extracellular space outside of the cell. The type II secretion system is just one of many secretory systems found in Gram-negative bacteria and is used to secrete a variety of different proteins, including bacterial toxins and degradative enzymes such as proteases and lipases. These secreted proteins are generally associated with the breakdown of host tissues and therefore are often important in causing the symptoms associated with certain bacterial infections.[3] Each bacterial cell will contain a number of type II secretion systems and these are found embedded in the inner and outer membranes of the cell.

Along with other secretory systems such as the chaperone/usher pathway and the type IV secretion system, secretion via the type II secretion system is a two-step process. The first step involves the Sec and Tat secretory pathways which are responsible for transporting proteins across the inner membrane into the periplasm.[4] For instance, the Sec pathway is used to transport structural components of the type II secretion system into the periplasm where they can then assemble, while both the Sec and Tat pathways are used to transport secretory proteins into the periplasm. Once these secretory proteins are in the periplasm the second step can then take place and they are secreted out of the cell through the type II secretion system.

Structure

Overall the type II secretion system is a large multiprotein machinery, made up of a number of distinct protein subunits known as the general secretory proteins (GSPs).[5] The genes encoding these GSPs are usually found together in the genome in a single operon and many of these genes overlap. Each gene is named with a letter corresponding to the GSP that it encodes (for example the gspD gene encodes GspD) and studies indicate that between 12 and 15 of these genes are essential to the function of the type II secretion system.[6] The GSPs are common among a number of different bacterial species and when they come together they form a complex that is structurally very similar to the type IV pili, an appendage that is also commonly found in gram negative bacteria.[7] Overall the type II secretion system can be broken down into four main components. These are the outer membrane complex, the inner membrane complex, the secretion ATPase and the pseudopilus.

Outer Membrane Complex

The outer membrane complex is made up largely by the secretin GspD.[8] Secretins are β-barrels that are found in membrane where they form channels that allow substances to move in or out of cells.[9] In the type II secretion system GspD creates a pore in the outer membrane of the bacterial cell through which proteins can be secreted. As a result, GspD is essential for the correct function system because without it secretory proteins cannot exit the cell. GspD is transported into the periplasm via the Sec translocon and is then inserted into the outer membrane. This insertion is not spontaneous however and is often reliant upon the β-barrel assembly machinery which ensures β-barrel proteins are folded correctly before insertion into the membrane.[10]

GspD is often found associated with the lipoprotein GspS. GspS is also transported into the periplasm using the Sec translocation machinery, at which point it is inserted into the inner layer of the outer membrane where it remains closely associated with GspD. It is thought that GspS plays an important role in the stabilization of the secretin GspD and helps prevent it from breaking down in the presence of highly degradative periplasmic enzymes.[8]

Inner Membrane Complex

The inner membrane complex is made up of several different Gsp proteins which are embedded in the inner membrane. Like the outer membrane secretin GspD these proteins are transported into the periplasm via the Sec translocation pathway before being inserted into the inner membrane. Four different proteins make up the inner membrane complex; these are GspC, GspF, GspL and GspM.[5]

Each of these individual subunits plays a slightly different role. GspC for instance has been shown to interact with GspD. This interaction helps gate the type II secretion system and only when this gate is open are secretory proteins able to enter the system and be pumped out of the cell. Importantly, when associated together, GspC, GspL and GspM help protect each other from proteolytic enzymes that would otherwise degrade them. Unlike the other proteins that make up the inner membrane complex GspF is a multipass transmembrane protein and it may play a role in binding the secretion ATPase. GspL is however known to form tight interactions with the secretion ATPase and these are needed to hold it in close association with the rest of the inner membrane complex.[11]

Secretion ATPase

The secretion ATPase, GspE, is an ATPase which is found closely associated with the inner membrane complex on the cytoplasmic side of the inner membrane.[12] GspE belongs to the type II/type IV secretion ATPase family. ATPases belonging to this family have a distinct hexameric structure. Each individual subunit of the hexamer has 3 main domains. These are 2 separate N-terminal domains called N1D and N2D which are separated by a short linker region and a single C-terminal domain termed the CTD. The CTD in turn is made up of 3 subdomains, one of which is a nucleotide binding domain. It is this nucleotide binding domain, which is present in of each of the 6 subunits of the hexamer, that is responsible for binding ATP. The other 2 domains that make up the CTD, a four helical domain and a metal binding domain, then help catalyze the hydrolysis of bound ATP.[12] This ATP hydrolysis is used to power the assembly and disassembly of the pseudopillus which is what drives secretion via the type II secretion system. As a result, the system cannot function without GspE. The N-terminal domains N1D and N2D form the interactions with the inner membrane complex which help keep the secretion ATPase in close association with the rest of the type II secretion system. The N2D domain is not fully understood but observations show that it is the N1D which is responsible for forming the tight interactions seen with the inner membrane complex subunit GspL.

Pseudopilus

The pseudopilus is found in the periplasm but does not extend out through the secretin GspD into the extracellular milieu. Its name it derived from the fact that it is made up of a number of pilin like proteins or pseudopilins, known as GspG, GspH, GspI, GspJ and GspK.[3] They are known as pseudopilins due to their similarity to the pilins (like PilA) that make up the type IV pili found in gram negative bacteria. Like their counterparts, the pseudopilins are initially produced in an immature form. These pre-pseudopilins consist of an N-terminal signal sequence that targets the proteins to the Sec translocon and a long C-terminal passenger domain which encodes the actual pseudopilin protein itself. Once the Sec machinery has transported the pre-pseudopilin across the inner membrane, but before the protein itself is released into the periplasm, the N-terminal signal sequence is cleaved at a conserved stretch of positively charged amino acid residues. This cleavage is catalysed by the signal peptidase GspO and the end result is the removal of the N-terminal signal sequence and the formation of a mature pseudopilin.[5] GspO is inserted in the inner membrane and is often closely associated with the type II secretion system machinery. Mature pilins and pseudopilins have a lollipop shaped structure, made up of a long hydrophobic tail and a globular hydrophilic head domain. Once in the periplasm in their mature state, the pseudopilins will then often be inserted into the outer leaflet of the inner membrane via their hydrophobic tails.

The major pseudopilin present in the pseudopilus is GspG. The pseudopilus forms when the individual pseudopilin subunits polymerize together. In this reaction the hydrophobic tails of different pseudopilins mesh together leaving their globular hydrophilic heads exposed. These long hydrophobic tails are able to aggregate together like this due to strong hydrophobic interactions and the end result is that the pseudopilus steadily grows. The assembly and disassembly of these pseudopilus subunits is powered by the secretion ATPase GspE. It is thought that this constant extension and retraction of the pseudopilus causes it to act like a piston and push secretory proteins out through the outer membrane secretin. When the pseudopilus then retracts new secretory proteins can then enter the system and the process will repeat. This movement of the pseudopilus is similar to the movement displayed by type IV pili which is known to enable twitching motility.[13]

Diagram showing the type II secretion system

Mechanism

Secretion of proteins via the type II secretion system occurs in a very specific way and is largely uniform among different species of bacteria. This mechanism can be broken down into several steps:

  1. Exoproteins, or proteins that are to be secreted, are first transported across the inner membrane and into the periplasm via the Sec translocation machinery. These exoproteins will exist here in the periplasm secretion until the type II secretion system is activated.
  2. Pre-pseudopilins are also transported from the cytoplasm into the periplasm via the Sec translocation machinery. Once in the periplasm they are cleaved by the pre-pilin peptidase GspO and converted into mature pseudopilins. The mature pseudopilins can then insert themselves into the inner membrane where they will exist until pseudopilus assembly occurs.
  3. The secretion ATPase GspE will then bind and hydrolyze ATP and the energy produced is used to power the formation of the pseudopilus. GspE is located in the cytoplasm but remains associated with the inner membrane complex via interactions with both GspL and GspF.
  4. When activated, the exoproteins previously transported into the periplasm are able to enter the secretion machinery. It is not fully understood how these exoproteins are selected for, but it is believed the interaction between GspC and GspD plays an important role.
  5. The assembly of the pseudopilus then forces the exoproteins out through the secretin GspD and into the extracellular milieu. This secretin forms a hydrophilic channel in the outer membrane which allows the proteins to exit the cell.
  6. Once outside of the cell the secreted exoproteins can then carry out their intended effects. Some of these for instance may be involved in signalling and others may act as virulence factors that help promote infection.

It is believed that quorum sensing plays a key role in controlling the activation of the type II secretion system and the initiation of exoprotein release.[6] Specifically quorum sensing helps regulate the transcription of the genes encoding these exoproteins and ensures that they are only produced when other like bacteria are nearby and environmental conditions are conducive to survival and infection.

References

  1. ^ Douzi B, Filloux A, Voulhoux R (2012). "On the path to uncover the bacterial type II secretion system". Philosophical Transactions of the Royal Society B: Biological Sciences. 367 (1592): 1059–1072. doi:10.1098/rstb.2011.0204. PMC 3297435. PMID 22411978.
  2. ^ Tseng T, Tyler BM, Setubal JC (2009). "Protein secretion systems in bacterial-host associations, and their description in the Gene Ontology". BMC Microbiology. 9: S2. doi:10.1186/1471-2180-9-S1-S2. PMC 2654662. PMID 19278550.{{cite journal}}: CS1 maint: unflagged free DOI (link)
  3. ^ a b Korotkov KV, Sandkvist M, Hol WG (2012). "The type II secretion system: biogenesis, molecular architecture and mechanism". Nature Reviews Microbiology. 10 (5): 336–351. doi:10.1038/nrmicro2762. PMC 3705712. PMID 22466878.
  4. ^ Natale P, Bruser T, Driessen AJ (2008). "Sec- and Tat-mediated protein secretion across the bacterial cytoplasmic membrane—Distinct translocases and mechanisms". Biochimica et Biophysica Acta (BBA) - Biomembranes. 1778 (9): 1735–1756. doi:10.1016/j.bbamem.2007.07.015. PMID 17935691.
  5. ^ a b c Filloux A (2004). "The underlying mechanisms of type II protein secretion". Biochimica et Biophysica Acta (BBA) - Molecular Cell Research. 1–3 (1–3): 163–179. doi:10.1016/j.bbamcr.2004.05.003. PMID 15546665.
  6. ^ a b Sandkvist M (2001). "Type II Secretion and Pathogenesis". Infection and Immunity. 69 (6): 3523–3535. doi:10.1128/IAI.69.6.3523-3535.2001. PMC 98326. PMID 11349009.
  7. ^ Craig L, Pique ME, Tainer JA (2004). "Type IV pilus structure and bacterial pathogenicity". Nature Reviews Microbiology. 2 (5): 363–378. doi:10.1038/nrmicro885. PMID 15100690.
  8. ^ a b von Tils D, Blädel I, Schmidt MA, Heusipp G (2012). "Type II secretion in Yersinia—a secretion system for pathogenicity and environmental fitness". Frontiers in Cellular and Infection Microbiology. 2: 160. doi:10.3389/fcimb.2012.00160. PMC 3521999. PMID 23248779.{{cite journal}}: CS1 maint: unflagged free DOI (link)
  9. ^ Korotkov KV, Gonen T, Hol WG (2011). "Secretins: dynamic channels for protein transport across membranes". Trends in Biochemical Sciences. 36 (8): 433–443. doi:10.1016/j.tibs.2011.04.002. PMC 3155655. PMID 21565514.
  10. ^ Ricci DP, Silhavy TJ (2012). "The Bam machine: A molecular cooper". Biochimica et Biophysica Acta (BBA) - Biomembranes. 1818 (4): 1067–1084. doi:10.1016/j.bbamem.2011.08.020. PMC 3253334. PMID 21893027.
  11. ^ Johnson TL, Abendroth J, Hol WG, Sandkvist M (2006). "Type II secretion: from structure to function". FEMS Microbiology Letters. 255 (2): 175–186. doi:10.1111/j.1574-6968.2006.00102.x. PMID 16448494.
  12. ^ a b Lu C, Turley S, Marionni ST, Park SY, Lee KK, Patrick M, Shah R, Sandkvist M, Bush MF, Hol WG (2013). "Hexamers of the Type II Secretion ATPase GspE from Vibrio cholerae with Increased ATPase Activity". Structure. 21 (9): 1707–1717. doi:10.1016/j.str.2013.06.027. PMC 3775503. PMID 23954505.
  13. ^ Mattick JS (2002). "Type IV pili and twitching motility". Annual Review of Microbiology. 56: 289–314. doi:10.1146/annurev.micro.56.012302.160938. PMID 12142488.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Type_II_secretion_system&oldid=995685359"