Jump to content

Alberg 22

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Ahunt (talk | contribs) at 20:10, 12 October 2018 (→‎See also: *Spindrift 22). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Alberg 22
Development
DesignerCarl Alberg
LocationCanada
Year1970
No. built180
Builder(s)Nye Yachts
NameAlberg 22
Boat
Displacement3,200 lb (1,451 kg)
Draft3.08 ft (0.94 m)
Hull
TypeMonohull
ConstructionFiberglass
LOA22.00 ft (6.71 m)
LWL16.00 ft (4.88 m)
Beam7.00 ft (2.13 m)
Engine typeOutboard motor
Hull appendages
Keel/board typelong keel
Ballast1,540 lb (699 kg)
Rudder(s)keel-mounted rudder
Rig
Rig typeBermuda rig
I foretriangle height27.75 ft (8.46 m)
J foretriangle base8.75 ft (2.67 m)
P mainsail luff24.00 ft (7.32 m)
E mainsail foot9.50 ft (2.90 m)
Sails
SailplanMasthead sloop
Mainsail area114.00 sq ft (10.591 m2)
Jib/genoa area121.41 sq ft (11.279 m2)
Total sail area235.41 sq ft (21.870 m2)
Racing
PHRF282 (average)

The Alberg 22 is a Canadian sailboat, that was designed by Swedish naval architect Carl Alberg and first built in 1970.[1][2]

Production

The design was built by Nye Yachts in Belleville, Ontario, later located in Bloomfield, Ontario, Canada. A total of 180 examples were completed before production ended.[1][3]

Design

Alberg 22

The Alberg 22 is a small recreational keelboat, built predominantly of fiberglass, with wooden handrails and toe rails, plus other trim. It has a masthead sloop rig, a raked stem, a raised transom, a keel-mounted rudder controlled by a tiller and a fixed long keel. It displaces 3,200 lb (1,451 kg) and carries 1,540 lb (699 kg) of ballast.[1]

The boat is normally fitted with a small outboard motor for docking and maneuvering.[1]

The design has a PHRF racing average handicap of 282 with a high of 276 and low of 288. It has a hull speed of 5.36 kn (9.93 km/h).[4]

Operational history

In a review Michael McGoldrick wrote, "This full keel boat has the proportions of a classic sailboat. It was designed by Carl Alberg, who earned a reputation for drawing extremely seaworthy sailboats. In fact, some people who are now sailing Alberg 30s and 37s got their start with the Alberg 22. The Alberg 22 heels over fairly easily at first, but it reaches a point where it locks in and goes. The full keel and high ballast displacement ratio (almost 50%) suggests that this boat should be able to handle some rough conditions."[5]

See also

Similar sailboats

References

  1. ^ a b c d Browning, Randy (2018). "Alberg 22 sailboat specifications and details". sailboatdata.com. Retrieved 25 July 2018.
  2. ^ Browning, Randy (2018). "Carl Alberg". sailboatdata.com. Retrieved 25 July 2018.
  3. ^ Browning, Randy (2018). "Nye Yachts (CAN)". sailboatdata.com. Retrieved 25 July 2018.
  4. ^ InterVisionSoft LLC (2018). "Sailboat Specifications for Alberg 22". Sailing Joy. Retrieved 25 July 2018.
  5. ^ McGoldrick, Michael (2018). "Alberg 22". Sail Quest. Retrieved 25 July 2018.
  • Media related to Alberg 22 at Wikimedia Commons