Jump to content

FNAB-43

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by BG19bot (talk | contribs) at 05:05, 16 March 2016 (v1.38b - WP:WCW project (Template value ends with break)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

FNAB-43
TypeSubmachine Gun
Place of originItalian Social Republic Italian Social Republic
Service history
In service1944
Used byItalian Social RepublicItalian Social Republic
ItalyItalian Resistance
Nazi GermanyNazi Germany
WarsWorld War II
Production history
Designed1943-44
ManufacturerFabbrica Nazionale d'Armi di Brescia
Produced1944 – 1945
No. built7,000
Specifications
Mass3.9 kg (8 Pounds 12 ounces)
Length790 mm (31.15 in)
Barrel length198 mm (7.80 in)

Cartridge9×19mm Parabellum
Caliber9 mm
ActionLever-delayed blowback, selective fire
Rate of fire400 Rounds Per Minute
Muzzle velocity381 m/s (1250 ft/s)
Feed system20 or 40 round detachable box magazine
SightsIron

The FNAB-43 is an Italian designed and developed submachinegun manufactured from 1943 to 1944. The first prototype was built in 1942 and the 7,000 built by the FNA-B (Fabbrica Nazionale d'Armi di Brescia, "Brescia National Arms Factory", hence the name) were issued to German and Italian RSI [ˌɛrreˌɛsseˈi] (Repubblica di Salò pronounced [reˈpubblika di saˈlɔ]) units fighting in Northern Italy. The FNAB-43 was an expensive weapon to manufacture as it used extensive milling and precision engineering in its manufacture.

Description

External image
image icon FNAB-43

The FNAB-43 uses a lever-delayed blowback system firing from the closed bolt position. The bolt is a two-piece unit with a pivoted lever interposed between bolt head and body. On firing the bolt head retracts and begins to rotate the lever, the base of which is against a lug in the body. This lever is pivoted to delay the opening movement to allow the bullet to leave the barrel. The breech pressure then drops before the lever has completed its rotation. The movement of the lever then presses the free end against the bolt body and accelerates the bolt's movement to the rear. The base of the lever then pulls clear of the lug and the whole bolt unit continues to recoil as one piece. On returning, the lever again engages the lug and pivots forward and in doing so removes a coupling which allows the firing pin to move only when the bolt is fully forward. This unusual and complicated system allows the rate of fire to be kept down to very practical 400 rpms without having to use a heavy bolt or strong spring.[1]

The FNAB-43 also uses a muzzle brake and compensator built into the barrel casing similar to some Russian weapons, and the magazine housing that is hinged so that the magazine can lie beneath the barrel similar to the French MAT-49. The single metal bar stock folds upwards allowing the weapon can be compactly carried.

Notes

References

  • Hogg, Ian (1978). The Encyclopedia of Infantry Weapons of World War II. London: Arms & Armour Press. ISBN 0-85368-281-X.
  • Hogg, Ian; Weeks, John S. (2000). Military Small Arms of the 20th Century. 7th edition. Iola, WI: Krause Publishing. ISBN 0-87341-824-7.