Goodwood railway station

For the disused station in Queensland, see Goodwood railway station, Queensland.

Goodwood
Goodwood Station with the Glenelg Tram overpass.
General information
Location	Railway Terrace North Goodwood SA 5034
Coordinates	34°57′06″S 138°35′06″E
Owned by	DPTI
Operated by	Adelaide Metro
Line(s)	Belair Line, Seaford Line, Tonsley Line
Distance	5 km from Adelaide
Platforms	3 (2 Centre)
Tracks	4
Construction
Structure type	Ground
Parking	Yes
Bicycle facilities	No
Accessible	No
History
Opened	5 March 1883
Rebuilt	1929
Services
Preceding station   TransAdelaide   Following station Template:TransAdelaide stations toward Template:TransAdelaide stations Template:TransAdelaide lines Template:TransAdelaide stations toward Template:TransAdelaide stations Template:TransAdelaide lines Template:TransAdelaide stations toward Template:TransAdelaide stations Template:TransAdelaide lines Template:TransAdelaide stations toward Template:TransAdelaide stations

Goodwood railway station is the junction station for the Belair and Seaford/Tonsley lines. The Belair line diverges south-east towards Millswood, while the Seaford and Tonsley lines diverge south-west towards Clarence Park. The Glenelg Tram line crosses over the railway lines at the south end of Goodwood station.

The station services the Adelaide inner-southern suburb of Goodwood, five kilometres from Adelaide station. It opened on 5 March 1883 with the opening of the Adelaide to Aldgate section of the Adelaide-Melbourne line.

Platform and track usage

Current

Goodwood station has three platforms serving the three broad gauge tracks of the three southern metropolitan lines. The fourth and western most track, which is part of the standard gauge line to Melbourne, bypasses the no-longer-used fourth platform.

From the north of the stations, there are four tracks between Greenhill Road and the station. The western most track is standard gauge, and the other three are broad gauge.

The yard immediately south of the station allows trains on broad gauge lines to transfer from any of the three platforms served by broad gauge to any of the broad gauge lines. The three broad gauge tracks then split into four broad gauge tracks, with two tracks heading south-east along the Belair line alignment, and the other two tracks heading southwest along the Seaford and Tonsley alignment. This also allows a crossing loop on the Belair line.

The western most and now fifth track, (standard gauge), remains separate from all of the broad gauge tracks, and then crosses the two Seaford tracks (from west to east). Keeping west of the two Belair tracks, it heads south-east and follows the Belair alignment. The two Belair broad gauge tracks then merge into one, and follow the eastern side of the Belair alignment. The standard gauge track then follows the western side of the Belair alignment; i.e. south-east of the Seaford / Belair separation, (sometimes referred to as the Goodwood junction), the standard gauge track is where (prior to 1995) the western of the dual broad gauge tracks from Goodwood to Belair used to be.

Pre-1995

Prior to the One Nation gauge standardisation project in 1995, all four tracks at Goodwood were broad gauge, and the Belair line was dual broad gauge tracks. In 1995, the western track of the Belair line was converted to standard gauge, and the Belair line is now only a single track of each gauge.

The Belair trains typically used Platform 1 for outbound services, and Platform 2 for inbound services, whilst the Seaford and Tonsley lines used Platform 3 for outbound services, and Platform 4 for inbound services. The yard immediately south allowed trains to transfer from any platform to any line. The most common use of this feature was when Inter/Intrastate treight and passenger trains would use the Seaford tracks to Goodwood from Keswick Rail Yards, then change to the Belair tracks through Goodwood Yard.

Bridges and underpass

The tram bridge

Prior to 1929, what is now the Glenelg Tram line was a railway line that crossed the main south line on a level junction. As part of its conversion from a broad gauge railway to a standard gauge tramway, the bridge was built to carry the trams safely over the railway lines.

Train on the Belair line passing the underpass

The Goodwood Junction Upgrade separated the existing freight and Belair passenger lines from the Seaford line by a grade separation. A rail underpass near Victoria Street lowered the Seaford line below ground level, with the freight and Belair lines above. It was completed in 2014

A project to construct a footbridge adjacent to the tram bridge was announced in May 2016. The footbridge will provide a new access point to the station.

Royal Adelaide Show

Goodwood station was the main railway station servicing the Royal Adelaide Showgrounds. However between 2005 and 2013 during the Royal Adelaide Show, TransAdelaide closed Platform 1 at Goodwood, and exclusively devoted the easternmost of the four tracks between Adelaide and Goodwood to a non-stop shuttle service between Platform 1 at Adelaide station and a temporary platform at the Showgrounds named Showground Central. During this period, Belair line movements were merged with (the previously) Noarlunga Line movements through Platforms 2 and 3 at Goodwood. In 2014, Showground Central was replaced by the permanent Adelaide Showground station with existing services making additional stops.

External links

• Media related to Goodwood railway station at Wikimedia Commons
• Goodwood Station Upgrade gallery
• Flickr gallery