Jump to content

IPC (electronics)

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Yobot (talk | contribs) at 06:43, 29 August 2016 (WP:CHECKWIKI error fixes using AWB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

IPC – Association Connecting Electronics Industries
Formation1957; 67 years ago (1957)
TypeIndustry association
HeadquartersBannockburn, IL
Chairman
Joe O'Neil
President and CEO
John W. Mitchell
Websitewww.ipc.org
Formerly called
Institute for Printed Circuits, Institute for Interconnecting and Packaging Electronic Circuits

IPC, the Association Connecting Electronics Industries, is a trade association whose aim is to standardize the assembly and production requirements of electronic equipment and assemblies. It was founded in 1957 as the Institute for Printed Circuits. Its name was later changed to the Institute for Interconnecting and Packaging Electronic Circuits to highlight the expansion from bare boards to packaging and electronic assemblies. In 1999, the organization formally changed its name to IPC with the accompanying tagline, Association Connecting Electronics Industries.[1]

IPC is accredited by the American National Standards Institute (ANSI) as a standards developing organization[2] and is known globally for its standards. It publishes the most widely used acceptability standards in the electronics industry.

IPC is headquartered in Bannockburn, IL and maintains additional offices in Washington, D.C.; Taos, N.M.; Arlington, Va.; Stockholm, Sweden; Brussels, Belgium; Moscow, Russia; Bangalore, India; and Shanghai, Shenzhen and Beijing, China.

Standards

IPC standards are used by the electronics manufacturing industry. IPC-A-610, Acceptability of Electronic Assemblies, is used worldwide by original equipment manufacturers and EMS companies. There are more than 3600 trainers worldwide who are certified to train and test on the standard. Standards are created by committees of industry volunteers. Task groups have been formed in China, the United States, and Denmark.

IPC Standard Tree

Standards published by IPC include:

General documents
  • IPC-T-50 Terms and Definitions
  • IPC-2615 Printed Board Dimensions and Tolerances
  • IPC-D-325 Documentation Requirements for Printed Boards
  • IPC-A-31 Flexible Raw Material Test Pattern
  • IPC-ET-652 Guidelines and Requirements for Electrical Testing of Unpopulated Printed Boards
Design specifications
  • IPC-2612 Sectional Requirements for Electronic Diagramming Documentation (Schematic and Logic Descriptions)
  • IPC-2221 Generic Standard on Printed Board Design
  • IPC-2223 Sectional Design Standard for Flexible Printed Boards
  • IPC-7351B Generic Requirements for Surface Mount Design and Land Pattern Standards
Material specifications
  • IPC-FC-234 Pressure Sensitive Adhesives Assembly Guidelines for Single-Sided and Double-Sided Flexible Printed Circuits
  • IPC-4562 Metal Foil for Printed Wiring Applications
  • IPC-4101 Laminate Prepreg Materials Standard for Printed Boards
  • IPC-4202 Flexible Base Dielectrics for Use in Flexible Printed Circuitry
  • IPC-4203 Adhesive Coated Dielectric Films for Use as Cover Sheets for Flexible Printed Circuitry and Flexible Adhesive Bonding Films
  • IPC-4204 Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Circuitry
Performance and inspection documents
  • IPC-A-600 Acceptability of Printed Boards
  • IPC-A-610 Acceptability of Electronic Assemblies
  • IPC-6011 Generic Performance Specification for Printed Boards
  • IPC-6012 Qualification and Performance Specification for Rigid Printed Boards
  • IPC-6013 Specification for Printed Wiring, Flexible and Rigid-Flex
  • IPC- 6202 IPC/JPCA Performance Guide Manual for Single- and Double-Sided Flexible Printed Wiring Boards
  • PAS-62123 Performance Guide Manual for Single & Double Sided Flexible Printed Wiring Boards
  • IPC-TF-870 Qualification and Performance of Polymer Thick Film Printed Boards
Flex assembly and materials standards
  • IPC-FA-251 Assembly Guidelines for Single and Double Sided Flexible Printed Circuits
  • IPC-3406 Guidelines for Electrically Conductive Surface Mount Adhesives
  • IPC-3408 General Requirements for Anisotropically Conductive Adhesives Films

Market research and statistical data

IPC members are eligible to participate in IPC’s statistical programs, which provide free monthly or quarterly reports for specific industry and product markets. Statistical programs cover the electronics manufacturing services (EMS), printed circuit board (PCB), laminate, process consumables, solder and assembly equipment segments.[3]

Comprehensive annual reports are distributed for the EMS and PCB segments, covering market size and sales growth, with breakdowns by product type and product mix as well as revenue trends from value-added services, trends in materials, financial metrics, and forecasts for total production in the Americas and the world.

Monthly market reports for the EMS and PCB segments provide recent data on market size, sales and order growth, book-to-bill ratios and near-term forecasts.[3]

Notes

  1. ^ "History of IPC's Name". IPC. Retrieved 5 January 2011.
  2. ^ "Standards Developing Organizations (SDOs)". ANSI. Retrieved 5 January 2011.
  3. ^ a b "Market Research from IPC". IPC. Retrieved 2014-10-16.