Jump to content

Tees Jubilee Bridge

Coordinates: 54°32′06″N 1°19′16″W / 54.535°N 1.321°W / 54.535; -1.321
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by BG19bot (talk | contribs) at 23:03, 14 May 2016 (→‎top: Remove blank line(s) between list items per WP:LISTGAP to fix an accessibility issue for users of screen readers. Do WP:GENFIXES and cleanup if needed. Discuss this at Wikipedia talk:WikiProject Accessibility#LISTGAP). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

54°32′06″N 1°19′16″W / 54.535°N 1.321°W / 54.535; -1.321

Jubilee Bridge
Jubilee Bridge over the river Tees from west side
Coordinates54°32′5.4″N 1°19′14.5″W / 54.534833°N 1.320694°W / 54.534833; -1.320694
CarriesQueen Elizabeth Way
CrossesRiver Tees
LocaleBorough of Stockton-on-Tees, England, United Kingdom
Official nameJubilee Bridge
Preceded byPreston Pipe Bridge
Followed bySurtees Bridge
Characteristics
DesignBalanced cantilever
MaterialReinforced concrete and T-section steel plate girders
Total length150 metres (492 ft)
Longest span106 metres (348 ft)
No. of spans3
Piers in water2
History
Constructed byBirse Construction Ltd.
Fabrication byCleveland Bridge & Engineering Company
Construction end2002
Opened20 April 2002
Location
Map

The Jubilee Bridge is a road and pedestrian/cycle bridge carrying the Queen Elizabeth Way north-south across the River Tees linking Stockton-on-Tees with nearby Ingleby Barwick in the borough of Stockton-on-Tees in the north-east of England.[1][2] The bridge is over 5 kilometres upriver from, and over 3 kilometres approximately south of Stockton town centre.[citation needed]

Design

The Jubilee Bridge is a balanced cantilever design, 150 m long with 3 spans and a main span of 106 m.[1][2] It is constructed from reinforced concrete and T-section steel plate girders.[3] It carries dual two lane carriageways and additionally on the western side, a pedestrian cycle track linking in to the local pedestrian cycle tracks on the southern bank of the river Tees.[4]

The piers are supported on 914 mm concrete-filled tubular steel piles and the abutments are supported by steel 'H' piles.[2]


Construction

The bridge was built by Birse Construction Ltd with steel fabrication supplied by Cleveland Bridge & Engineering Company of Darlington.[2]

Operation

The bridge was opened on 20 April 2002.[1][2]

References

  1. ^ a b c "Jubilee Bridge". Bridges on the Tyne. Retrieved 17 July 2010.
  2. ^ a b c d e "Bridges over the Tees" (PDF). touristleafletsonline.com. Retrieved 16 July 2012.
  3. ^ Janberg, Nicolas. "Jubilee Bridge". Structurae. Retrieved 16 July 2012.
  4. ^ "View Cabinet Decision Record". Stockton-on-Tees Borough Council. 28 April 2008. Retrieved 17 July 2010.