Lakeview Gusher

Coordinates: 35°05′29″N 119°24′05″W / 35.091424°N 119.401377°W / 35.091424; -119.401377
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 83.250.152.96 (talk) at 06:50, 3 September 2014 (→‎Background). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Lakeview Gusher Number One
The Lakeview gusher after the flow had partially subsided and the well surrounded by a sandbag berm, 1910.
Map
LocationKern County, California
Coordinates35°05′29″N 119°24′05″W / 35.091424°N 119.401377°W / 35.091424; -119.401377
Date14 March 1910 – September 1911
Cause
CauseWellhead blowout
OperatorLakeview Oil Company
Spill characteristics
Volume9 million barrels (1.4×10^6 m3)
Reference no.485

Lakeview Gusher Number One is the name given to an immense, out-of-control eruption of hydrocarbons from a pressurized oil well in the Midway-Sunset Oil Field in Kern County, California, in 1910. It created the largest accidental oil spill in history, lasting 18 months and releasing 9 million barrels (1.4×10^6 m3) of crude oil.[1]

Midway-Sunset was one of the largest oil reserves in America. When drilling commenced, the Lakeview Oil Company expected natural gas and a small amount of oil. Instead, there was a large blowout which overloaded storage tanks.[2]

The 9-million-barrels (1.4×10^6 m3) geyser released more than 1.2 million US tons of crude, far more than any other single leak on land or water. Its site is located about a half-mile (800 m) east of the TaftMaricopa Highway, California Route 33, marked by a Caltrans guide sign and a bronze plaque designated as California Historical Landmark number 485.[3]

Background

The Lakeview Oil Company started drilling at their Number One well on 1 January 1909. Initially only natural gas was found. As work continued the company partnered with Union Oil, which wanted to build storage tanks there.[4]

Early twentieth-century drilling technology lacked such modern safety features as blowout preventers. When drilling reached 2,440 ft (740 m) on 14 March 1910[5] pressurized oil blew through well casing above the bit. An estimated 9 million barrels (1.4×10^6 m3) escaped before the gusher was brought under control in September 1911.[6]

Initial daily flow was 18,800 barrels (2,990 m3), creating a river of crude that crews rushed to contain with improvised sand bag dams and dikes. Peak flow reached some 90,000 barrels (14,000 m3), diverted via pipeline to storage tanks 2.5 miles (4.0 km) away, where an 8-inch (200 mm) line led to Port Avila on the coast.[2]

In spite of these efforts, less than half of the 9.4 million barrels released during the gusher's 544 days was saved, the rest evaporating off or seeping into the ground.[2]

See also

References

  1. ^ Harvey, Steve (13 June 2010). "California's legendary oil spill". Los Angeles Times. Retrieved 14 July 2010.
  2. ^ a b c "The Lakeview Gusher". San Joaquin Geological Society. 23 September 2002. Archived from the original on 19 October 2006. Retrieved 11 June 2010.
  3. ^ "Lakeview Gusher". Office of Historic Preservation, California State Parks. Retrieved 2012-10-07.
  4. ^ Bailey, Richard C. (1967). Kern County Place Names. Bakersfield: Merchant's Printing and Lithography Co. OCLC 158106.
  5. ^ Rintoul, William (1976). Spudding In: Recollections of Pioneer Days in the California Oil Fields. San Francisco: California Historical Society. pp. 106–113. ISBN 0-910312-37-0.
  6. ^ Rintoul, William; Hodgson, Susan F. (1990). Drilling through time: 75 years with California's Division of Oil and Gas. Sacramento: California Department of Conservation, Division of Oil and Gas. pp. 13–15. ISBN 0-9627124-0-X.

External links