Jump to content

Marchbanks Speedway

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Ched (talk | contribs) at 16:11, 5 August 2019 (Adding short description: "Former auto race track" (Shortdesc helper)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Marchbanks Speedway
LocationKings County, near Hanford, California
Major eventsUSAC National Championship
California 200
(1967-1969)
NASCAR Grand National
(1951, 1960-1961)
Dirt oval
Surfacedirt
Length0.5 miles (0.8 km)
Asphalt tri-oval
SurfaceAsphalt
Length1.375 miles (2.212 km)

Marchbanks Speedway (also Hanford Motor Speedway) was a racetrack located in San Joaquin Valley near Hanford, California. It hosted open-wheel and NASCAR cars, as well as motorcycle racing, in the 1950s and 1960s. The track was subsequently dismantled and destroyed.

It was originally built by local farmer B. L. Marchbanks, and named after himself. The track began as a half mile dirt track. It was later paved as a 1.4-mile (2.3 km), high-banked racetrack and also hosted speed runs for watercraft in an infield lake, much as Lake Lloyd at the Daytona International Speedway does today.

Three NASCAR races were held at the track. The first was held on the dirt track in 1951. Danny Weinberg won his only NASCAR race. Marvin Porter won the race on the 1.4-mile (2.3 km) paved course in 1960. The NASCAR race record was set March 12, 1961, when Fireball Roberts led all 178 laps of a 250-mile (400 km) race, hosted at the track. He finished two laps ahead of the second place driver.[1][2][3]

Use in gaming

Hanford is used in Indianapolis 500 Evolution.

Sources

  1. ^ Track NASCAR winners list at racing-reference.info, Retrieved November 26, 2007
  2. ^ Qualifying Record-Breaker, 1999, Retrieved November 26, 2007
  3. ^ Countdown: California; Mark Aumann, NASCAR.COM, January 7, 2006, Retrieved November 26, 2007

"Kings County, California" is an invalid category parameter for Template:Coord missing.
The problem is usually caused either by a spelling mistake or by an-over-precise category.
For a full list of categories, see Category:Unclassified articles missing geocoordinate data and its subcategories.