Jump to content

Paxman Viper

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by InternetArchiveBot (talk | contribs) at 23:21, 6 March 2018 (Rescuing 1 sources and tagging 0 as dead. #IABot (v1.6.4) (Artix Kreiger)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Viper
Role Homebuilt aircraft
National origin Canada
Manufacturer Paxman's Northern Aircraft
Designer Elbert Paxman
Introduction 1994
Status Production completed
Number built One

The Paxman Viper is a Canadian homebuilt aircraft that was designed by Elbert Paxman and produced by Paxman's Northern Aircraft of Glenwood, Alberta, introduced in 1994. When it was available the aircraft was supplied as a kit for amateur construction.[1]

Design and development

The Viper was designed for the Canadian advanced ultralight category. It features a cantilever low-wing, a two-seats-in-side-by-side configuration enclosed cockpit under a bubble canopy, fixed conventional landing gear and a single engine in tractor configuration.[1][2]

The aircraft airframe is made from wood, covered in doped aircraft fabric. Its 27.00 ft (8.2 m) span wing has a wing area of 102.0 sq ft (9.48 m2). The acceptable power range is 65 to 110 hp (48 to 82 kW) and the standard engine used is a 100 hp (75 kW) Suzuki automotive conversion powerplant.[1]

The Viper has a typical empty weight of 585 lb (265 kg) and a gross weight of 1,050 lb (480 kg), giving a useful load of 465 lb (211 kg). With full fuel of 17 U.S. gallons (64 L; 14 imp gal) the payload for the pilot, passenger and baggage is 363 lb (165 kg).[1]

The standard day, sea level, no wind, take off with a 100 hp (75 kW) engine is 300 ft (91 m) and the landing roll is 400 ft (122 m).[1]

The manufacturer estimated the construction time from the supplied kit as 500 hours.[1]

Operational history

By 1998 the company reported that one kit had been sold, was completed and flying.[1]

In January 2014 one example was registered with Transport Canada.[3]

Specifications (Viper)

Data from AeroCrafter[1]

General characteristics

  • Crew: one
  • Capacity: one passenger
  • Length: 20 ft 6 in (6.25 m)
  • Wingspan: 27 ft 0 in (8.23 m)
  • Wing area: 102.0 sq ft (9.48 m2)
  • Empty weight: 585 lb (265 kg)
  • Gross weight: 1,050 lb (476 kg)
  • Fuel capacity: 17 U.S. gallons (64 L; 14 imp gal)
  • Powerplant: 1 × Suzuki four cylinder, liquid-cooled, four stroke automotive conversion engine, 100 hp (75 kW)
  • Propellers: 3-bladed composite

Performance

  • Maximum speed: 125 mph (201 km/h, 109 kn)
  • Cruise speed: 110 mph (180 km/h, 96 kn)
  • Stall speed: 38 mph (61 km/h, 33 kn)
  • Rate of climb: 1,500 ft/min (7.6 m/s)
  • Wing loading: 10.3 lb/sq ft (50 kg/m2)

References

  1. ^ a b c d e f g h Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 218. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1
  2. ^ Transport Canada (30 December 2013). "Listing of Models Eligible to be Registered as Advanced Ultra-Light Aeroplanes (AULA)". Retrieved 25 January 2014.
  3. ^ Transport Canada (25 January 2014). "Canadian Civil Aircraft Register". Archived from the original on 18 July 2011. Retrieved 25 January 2014. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)