Ruiz & Pav.
Polylepis (pronounced pah-lee-LEE-piss or pah-lee-LEH-piss) is a genus comprising twenty eight recognised shrub and tree species, that are endemic to the mid- and high-elevation regions of the tropical Andes. This group is unique in the rose family in that it is predominantly wind-pollinated. They are usually gnarled in shape, but in certain areas some trees are 15–20 m tall and have 2 m-thick trunks. The foliage is evergreen, with dense small leaves, and often having large amounts of dead twigs hanging down from the underside of the canopy. The name Polylepis is, in fact, derived from the Greek words poly (many) plus letis (layers), referring to the shredding, multi-layered bark that is common to all species of the genus. The bark is thick and rough and densely layered for protection against low temperatures. Some species of Polylepis form woodlands growing well above normal tree line within grass and scrub associations at elevations over 5000 m; which makes Polylepis appear to be the highest naturally occurring arborescent angiosperm genus in the world.
The genus Polylepis is very complicated taxonomically. It contains about twenty species that are distributed across the Andes. It is in the rose family, Rosaceae. The genus belongs to the tribe Sanguisorbeae, which mainly comprises herbs and small shrubs. Although the relationship of Polylepis to other genera of Sanguisorbeae is largely unknown, the analysis of Torsten Eriksson et al. (2003) showed evidence of a close relationship between Polylepis and Acaena, which shows tendencies towards having fused stipular sheaths, reddish, flaking-off bark, and axillary, somewhat pendant inflorescences, features otherwise characteristic of Polylepis. There are several characteristics that are important taxonomically to distinguish between species of Polylepis, for example: 1) The amount of leaf congestion, 2) presence or absence of spurs and their size and vestiture, 3) presence or absence and type of trichomes, (4) size, shape, thickness and vestiture of leaflets. The most important taxonomic character, however, is the leaflets.
Studies suggest that repeated fragmentation and reconnection of páramo vegetation, caused by the Pleistocene climatic fluctuations, had a strong influence on the evolution and speed of speciation in the genus Polylepis as well as the páramo biota as a whole.
- Polylepis australis
- Polylepis besseri
- Polylepis canoi
- Polylepis crista-galli
- Polylepis flavipila
- Polylepis hieronymi
- Polylepis incana
- Polylepis incarum
- Polylepis lanata
- Polylepis lanuginosa
- Polylepis microphylla
- Polylepis multijuga
- Polylepis neglecta
- Polylepis pacensis
- Polylepis pauta
- Polylepis pepei
- Polylepis quadrijuga
- Polylepis racemosa
- Polylepis reticulata
- Polylepis rugulosa
- Polylepis sericea
- Polylepis subsericans
- Polylepis subtusalbida
- Polylepis triacontandra
- Polylepis tomentella
- Polylepis weberbaueri
Habitat and Distribution
Tree species in the genus Polylepis are confined to the high tropical South American Andes Mountains, with the most abundant concentrations of Polylepis ranging from northern Venezuela to northern Chile and adjacent Argentina. One known group of extra-tropical populations of Polylepis is distributed in the mountains of Northwestern Argentina. Most species of Polylepis grow best at high elevations between 3500 and 5000 meters. However, there are occurrences of species at altitudes as low as 1800 meters. These low altitude species are mixed with montane forest which indicates that components of the genus could have been present in western South America during the Miocene Period or even earlier. It is extremely rare for tree species to live at such altitudes, making Polylepis one of the highest naturally occurring trees along with the conifers of the Himalayan Mountains. Polylepis racemosa grows as shrubby trees on steep, rocky slopes above cloud forest. Polylepis tarapacana is one that reaches 4,800 m; the highest elevation of tree growth in the world.
There is much debate on whether Polylepis was forced to exhibit such extreme elevation habitats due to habitat destruction by human interference. Physiological tolerances for growth at these elevations are subject to considerable debate among scientists, but evidence indicates that even before severe decimation by man, high elevation trees were limited in their distribution by the presence of specialized microhabitats. Due to the harsh environment in which many species of Polylepis grow the growth of the tree's stems and branches are generally contorted. This abnormal growth is often associated with windy, cold or arid habitats. The climate of the South American Andes changes drastically throughout the region creating lots of microhabitats. Overall, the climate consists of short southern summers when temperatures are warm and rainfall is high and long winters when temperatures are low and rainfall is limited. The temperature and amount of rainfall also depend on which side of the mountain (eastern or western side), elevation and latitude.
Bark: The bark of Polylepis consists of numerous layers of thin, dark red exfoliating sheets. In some cases, the layered bark can be more than an inch thick. A majority of the larger branches have similar shredding bark. It would seem that the bark serves as insulation from both the nightly frosts and the intense daytime irradiation. The thick bark of Polylepis also serves an important function as protection against fire and isolation against nocturnal frosts. It is thought to originally have been a protection against epiphytic mosses, whose thick masses may damage trees by adding weight to the branches and providing a suitable environment for fungi which attack the trees.
Branching Pattern and Leaf Arrangement: Polylepis trees tend to have twisted, crooked stems and branches with repeated sympodial branching. Contorted growth is often associated with windy, cold, or arid habitats. The leaves are generally congested along the branch tips often at the end of long, naked branch segments.
Stipule Sheath: Each leaf has a pair of stipules fused around the branch forming a sheath. The crowding of the leaves results in a pattern of stacked, inverted cones due to the overlapping of the stipule sheaths. On the top of the sheaths on either side of the petiole there are often projections, or spurs. The presence or absence of these spurs and their size are important taxonomic characteristics.
Leaves and Leaflets: All species of Polylepis have compound, imparipinnate leaves, but the number of pairs of leaflets varies within and between species. The arrangement of the leaflets and the position from the terminal leaflet of the largest pair of leaflets determine the shape of the leaf. The outline of the leaf is usually rhombic in species with one pair of leaflets. Depending on the position of the largest pair, the leaf can be trullate to obtrullate in taxa with more than one leaflet pair.
The pollen of Polylepis can be described as monads, isopolar, and more or less spheroidal to slightly oblate in shape. They have both an elongated and rounded aperture and the limits of the endoaperture (the inner openings of compound the aperture) are obscure. The elongated part of the aperture is completely covered by a pontoperculum.
The fruits of Polylepis are essentially achenes composed of the floral cup fused to the ovary. Fruits of all species are indehiscent (they do not open at maturity) and one seeded. The surface of the fruit of different species has ridges, knobs, spines or wings. There are no definite sites for the placement of these different types of protrusions that appear irregularly over the surface. The type of protrusion, wings verses spines, or knobs versus wings, is useful for distinguishing between species.
The flowers of all species of the genus are born on inflorescences. In most cases the inflorescences are long enough to hang like a pendant, but in the westernmost populations of P. tomentella and in at least one population of P. pepei, the inflorescence is so reduced that it remains almost hidden in the leaf axil. In the species with pendant inflorescences, the flowers are born regularly along the rachis or clustered toward the terminal end. The flowers themselves are reduced and have many features associated with wind pollination. These include: the absence of petals, green rather than colored sepals, an absence of scent or nectar, numerous anthers with long filaments, abundant, dry pollen, a large, spreading, fine fringed stigma, compounded pinnate leaves and the growth of trees in strands.
Pollination and dispersal
Wind-pollination was a useful and evolutionary event in the adaption to the highlands, where insects are much scarcer than in warmer climates. By relying on wind for pollination, species distribution and phylogeny reconstruction have different patterns than insect-pollinated genus. Wind pollination allows genetic information to cover large distances and hurdle reproductive barriers.
The fruits of all species must be wind dispersed because members of the genus are trees and are thus too tall for animals (presumably mammals) to brush against on the ground. However, the elaboration of spines on the fruits of many taxa would argue for animal dispersal although wind dispersal undoubtedly predominates in P. australis. Numerous birds forage or live in Polylepis trees and it is possible that they disperse fruits caught in their feathers.
Mountain forest ecosystems have drastically changed due to human disruption such as cutting, burning and grazing, which causes fragmentation of the forest landscape. Polylepis contains some unique forms of autoecological (population ecology) and synecological relationships. Since they are located at high altitudes, they are equipped with specializations that help them withstand the harsh conditions. They are semiarid with a mean annual rainfall average between 200 and 500 mm. Tropical habitats found above 3600 m are subject to extreme diurnal changes. In midday, the temperatures may reach somewhere around 10-12 °C (or higher). This causes the soil lower than the top 30 cm to maintain a constant temperature of about 2-5 °C (or lower) all year. Thus plants must stay active throughout the year and do not become dormant. Given these harsh circumstances, the growth of trees in such areas should be impossible. The reasons for Polylepis’ ability to inhabit such conditions have been studied by many. Carl Troll, for example, considered Polylepis to be a distinct type of vegetation and he claimed one of the reasons for their survival is the presence of microclimatic phenomena such as the formation of cloud layers on slopes and along low drainage areas, prevented nighttime freezes and producing what he called "lower elevation" conditions. Another study was done by Hoch and Korner which provided that Polylepis has slow growth making it a weak competitor. Therefore, if the temperatures become warmer and more humid, Polylepis tends to lose out to the species that are more vigorous.
Polylepis Conservation in South Conchucos
In 2005 a conservation project began promoted by the Peruvian Department of Environment, the Mountain Institute and had the management support of the Ancash Association and International Conservation (IC). The project's direct environmental outcome was the restoration and conservation of the polylepis forests, which contributed to the development of a forest corridor linking Conchucos valley between Huáscaran National Park and the Huayhuash Reserved Zone in the Ancash Department of Peru. In respect to conservation of biodiversity as a component of sustainable development, this project represented a model of international environmental and social corporate responsibility for the mining sector in Peru and the world.
Polylepis forests exist primarily as small, widely isolated fragments, which are being rapidly depleted by rural communities. Remaining Polylepis forests are used for firewood and building material and provide protection against erosion and habitats for endangered animals. In some countries, conservation and reforestation measures are underway.
Since Polylepis inhabits extremely high elevations, it has played an important role in the culture of various Andean Indian groups by providing building material and firewood. The woodlands themselves constitute a distinctive habitat for other organisms allowing for the creation of endemic fauna in the future. The trees are also used as decoration; planted in front of buildings and houses. As a result of people expanding their reach, Polylepis have been subjected to harvest for firewood, the clearing of woodlands for pastureland and the destruction of seedlings by domesticated animals. Few trees have been found growing on level ground and are subsequently located on "inaccessible" slopes.
|Wikispecies has information related to Polylepis|
- Schmidt-Lebuhn, A.N,; M. Kessler; M. Kumar (2006). "Promiscuity in the Andes: Species relationships in Polylepis (Rosaaceae, Sanguisorbeae) based on AFLP and morphology". Systematic Botany. 31: 547–559. doi:10.1600/036364406778388629.
- Simpson, Beryl B. "A Revision of the Genus Polylepis (Rosaceae: Sanguisorbeae)." Washington, D.C.: Smithsonian Institution Press, 1979. Vol. Smithsonian Contributions to Botany. Print
- Robertson, K. R., 1974: The genera of the Rosaceae in the southeastern United States. – J. Arnold Arboretum 55: 303-332, 344-401, 611-662
- Kerr, Malin. "A phylogenetic and Bilgeographic Analysis of Sanguisorbeae (Rosaceae). With Emphasis on the Pleistocene Radiation of the High Andean Genus Polylepis". University of Maryland, 2004 
- Fjeldsa, Jon, and Michael Kessler. "Conserving the Biological Diversity of Polylepis Woodlands of the Highland of Peru and Bolivia." A Contribution to Sustainable Natural Resource Management in the Andes. Eds. Engblom, Gunnar and Peter Driesch. Copenhagen, Denmark: NORDECO, 1996. Print.
- Kessler, (1995)
- Schmidt-Lebuhn A.N., P. Seltmann and M. Kessler. "Consequences of the pollination system on genetic structure and patterns of species distribution in the Andean genus Polylepis (Rosaceae): a comparative study." Institute of Geobotany and Botanical Garden, Martin-Luther-University Halle-Wittenberg, Germany. Plant Systematics and Evolution. 266: 91-103. Springer-Verlag, 2007.
- Renison, D. "The Restoration of Degraded Mountain Woodlands: Effects of Seed Provenance and Microsite Characteristics on Polylepis australis Seedling Survival and Growth in Central Argentina ." Restoration Ecology 13.1 (2005): 129–137. Print.
- Hoch, G., and C. Korner. "Growth, demography and carbon relations of Polylepis trees at the world's highest treeline ." Functional Ecology 19.6 (2005): 941–951. Print.
- "Antamina | Environment | Polylepis Conservation in South Conchucos." Antamina. N.p., n.d. Web. 4 Nov. 2011. 
- Price, Larry W. "Mountain Vegetation." Mountains & Man: a Study of Process and Environment. Berkeley: University of California, 1981. 275. Print.
|Wikimedia Commons has media related to Polylepis.|