Jump to content

S-GPS

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Arsenikk (talk | contribs) at 10:33, 26 September 2015 (removed Category:Satellite navigation systems using HotCat). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Simultaneous GPS or S-GPS is a method to enhance a mobile phone's satellite-based position reporting ability to a carrier.

Ordinarily, a built-in , multi- dimensional GPS device is used to determine the location of an E911 call made from CDMA phones. By using a time-multiplexed scheme called TM-GPS, the reception of the telephone call and the GPS signal are alternated one after the other, requiring only one RF radio.

As the name implies, Simultaneous GPS allows a cellphone to receive both GPS and voice data at the same time, which improves sensitivity and allows service providers to offer location-based services. The use of two radios with a single antenna imparts new design challenges, but the commercial availability of S-GPS chipsets, from manufacturers such as Qualcomm, has led to adoption of the method in newer handsets[1] and Samsung's latest processors (as the ones used in Galaxy S III, Note 10.1, Note 2[2]).

References

  1. ^ "Improving S-GPS sensitivity". Avago Technologies.
  2. ^ Samsung Galaxy Note 10.1