Jump to content

SAB-SEMA 10

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by BD2412 (talk | contribs) at 22:38, 23 June 2015 (Consensus at Template talk:Aviation lists#RfC: Should this navbox be removed from non-mentioned articles? using AWB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

SAB-SEMA 10
SAB-SEMA 12
Role Intermediate trainer
National origin France
Manufacturer Société Aérienne Bordelaise (SAB)
Designer Societé d'Etudes de Materiel d'Aviation (SEMA)
First flight c.1933
Number built 1

The SAB-SEMA 10 was a single-engine advanced trainer, designed and built in France as the SEMA 10, in the 1930s. It failed to win a French production contract and only one was built. Re-engined, modified and redesignated SAB-SEMA 10, it served with the Spanish Republican Air Force at the beginning of the Spanish Civil War.

Design and development

The SAB-SEMA 10 was designed by the Societé d'Etudes de Materiel d'Aviation (SEMA) and built by the Société Aérienne Bordelaise (SAB) to compete for a 1933 French government contract for an intermediate and advanced military trainer. It was a conventional biplane, metal framed and fabric covered, powered by a 240 hp (180 kW) Lorraine 7Mc Mizar seven-cylinder radial engine. Instructor and pupil occupied open tandem cockpits.[1]

The SAB-SEMA 10 failed to gain a production contract when the competition was won by the Romano R.82. It was then re-engined with a more powerful 300 hp (224 kW) Lorraine 9Na Algol nine-cylinder radial with a Townend ring cowling. At the same time wing and tail modifications were made and the aircraft redesignated the SAB-SEMA 12. This was a single-bay biplane with N-form interplane struts. The lower wing had a smaller chord than the upper one but both carried ailerons, externally connected. The fuselage was flat sided and the tailplane was mounted on top of it. The fin was tall and the rudder extended to the bottom of the fuselage, moving between separate elevators. It had a conventional undercarriage with mainwheels in spats.[1]

Operational history

In October 1936 the SAB-SEMA 12 was sold to the Spanish Republican Air Force for use as a trainer for military pilots in the Spanish Civil War. It was based at the Los Alcázares flying school in Murcia.[1]

Variants

SAB-SEMA 10
SAB-SEMA 12

Operators

 Spain

Specifications (SAB-SEMA-12)

Data from Howson[1]

General characteristics

  • Crew: two
  • Length: 6.9 m (22 ft 8 in)
  • Wingspan: 8.75 m (28 ft 8 in)
  • Height: 2.82 m (9 ft 3 in)
  • Empty weight: 1,126 kg (2,482 lb)
  • Gross weight: 1,589 kg (3,503 lb)
  • Powerplant: 1 × Lorraine 9Na Algol 9-cylinder radial, 221 kW (296 hp)
  • Propellers: 3-bladed

Performance

  • Maximum speed: 260 km/h (160 mph, 140 kn)
  • Range: 575 km (357 mi, 310 nmi)
  • Service ceiling: 6,000 m (20,000 ft)
  • Time to altitude: 5 min to 1,000 m (3,048 ft)

Armament

  • Guns: Twin machine guns in rear cockpit.

See also

Aircraft of comparable role, configuration, and era

Related lists

References

  1. ^ a b c d Howson, Gerald (1990). Aircraft of the Spanish Civil War. London: Putnam Aeronautical Books. p. 267. ISBN 0-85177-842-9.