This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)(Learn how and when to remove this template message)
A semipermeable membrane is a type of biological or synthetic, polymeric membrane that will allow certain molecules or ions to pass through it by diffusion—or occasionally by more specialized processes of facilitated diffusion, passive transport or active transport.[dubious ] The rate of passage depends on the pressure, concentration, and temperature of the molecules or solutes on either side, as well as the permeability of the membrane to each solute. Depending on the membrane and the solute, permeability may depend on solute size, solubility, properties, or chemistry. How the membrane is constructed to be selective in its permeability will determine the rate and the permeability. Many natural and synthetic materials thicker than a membrane are also semipermeable. One example of this is the thin film on the inside of the egg.
Note that a semipermeable membrane is not the same as a selectively permeable membrane. Semi-permeable membrane describes a membrane that allows some particles to pass through (by size), whereas the selectively permeable membrane "chooses" what passes through (size is not a factor).
An example of a biological semi-permeable membrane is the lipid bilayer, on which is based the plasma membrane that surrounds all biological cells. A group of phospholipids (consisting of a phosphate head and two fatty acid tails) arranged into a double-layer, the phospholipid bilayer is a semipermeable membrane that is very specific in its permeability. The hydrophilic phosphate heads are in the outside layer and exposed to the water content outside and within the cell. The hydrophobic tails are the layer hidden in the inside of the membrane. The phospholipid bilayer is the most permeable to small, uncharged solutes. Protein channels float through the phospholipids, and, collectively, this model is known as the fluid mosaic model.
|This section does not cite any sources. (January 2016) (Learn how and when to remove this template message)|
The diffusion of water through a selectively permeable membrane is called osmosis.This allows only certain particles to go through including water and leaving behind the solutes including salt and other contaminants. In the process of reverse osmosis, thin film composite membranes (TFC or TFM) are used. These are semipermeable membranes manufactured principally for use in water purification or desalination systems. They also have use in chemical applications such as batteries and fuel cells. In essence, a TFC material is a molecular sieve constructed in the form of a film from two or more layered materials. Prof. Sidney Loeb and Srinivasa Sourirajan invented the first practical synthetic semi-permeable membrane. Membranes used in reverse osmosis are, in general, made out of polyamide, chosen primarily for its permeability to water and relative impermeability to various dissolved impurities including salt ions and other small molecules that cannot be filtered. Another example of a semipermeable membrane is dialysis tubing.
Semipermeable Membrane Role in Cellular Communication
The semipermeable membrane is pertinent to cellular communication. A cell membrane consists of proteins and phospholipids. Signaling molecules send chemical messages to the proteins in the cell membrane. The signaling molecules bind to proteins, which alters the protein. A message is sent into to the cell and a specific cellular response is turned on or activated.
Other types of semipermeable membranes are cation exchange membrane (CEM), charge mosaic membrane (CMM), bipolar membrane (BPM), anion exchange membrane (AEM) alkali anion exchange membrane (AAEM) and proton exchange membrane (PEM).
- Koros, W. J.; Ma, Y. H. & Shimidzu, T. (1996). "Terminology for Membranes and Membrane Processes (IUPAC Recommendations 1996)" (PDF). Pure & Appl. Chem. 68 (7): 1479–1489. See this document for definitions of penetrant (permeant), synthetic (artificial) membrane, and anion-exchange membrane.
- Rozendal, R.A.; Sleutels, T.H.; Hamelers, H.V. & Buisman, C.J. (2008). "Effect of the Type of Ion Exchange Membrane on Performance, Ion Transport, and pH in Biocatalyzed Electrolysis of Wastewater". Water Sci Technol. 57 (11): 1757–1762. doi:10.2166/wst.2008.043. PMID 18547927.[non-primary source needed]
- "High Flow Porous Membranes for Separating Water from Saline Solutions US 3133132 A". May 12, 1964. Retrieved 22 April 2014.[non-primary source needed]
- Friedl, Sarah. "Semipermeable Membranes' Role in Cell Communication - Video & Lesson Transcript | Study.com". Study.com. Retrieved 2017-04-06.
- Wood, David. "Semipermeable Membrane: Definition & Overview - Video & Lesson Transcript | Study.com". Study.com. Retrieved 2017-04-06.
 Friedl, Sarah. "Semipermeable Membranes' Role in Cell Communication - Video & Lesson Transcript." Study.com. N.p., n.d. Web. 05 Apr. 2017.
 Wood, David. "Semipermeable Membrane: Definition & Overview - Video & Lesson Transcript." Study.com. N.p., n.d. Web. 05 Apr. 2017.
- The European Membrane House, a non-profit international association created to continue the work of the network and parternships developed in NanoMemPro, an earlier EU-funded European network of membrane researchers.
- Short, non-scholarly WiseGeek article, "What is a Semipermeable Membrane.