Senator George Sellar Bridge
Senator George Sellar Bridge | |
|---|---|
 | |
| Coordinates | 47°24′36″N 120°17′41″W / 47.41°N 120.29472°W |
| Carries |  US 2 |
| Crosses | Columbia River |
| Locale | East Wenatchee, Washington / West Wenatchee, Washington |
| Maintained by | State of Washington |
| Characteristics | |
| Design | Tied-arch bridge |
| Total length | 1,208 feet (368 m) |
| Longest span | 480 feet (150 m) |
| Clearance below | 85 feet (26 m)[1] |
| History | |
| Opened | 1950 |
| Replaces | Columbia River Bridge (Wenatchee, Washington) |
| Nearest city | Wenatchee, Washington |
| Area | less than one acre |
| Built | 1950 |
| MPS | Bridges of Washington State MPS |
| NRHP reference No. | 95000623[2] |
| Added to NRHP | May 24, 1995 |
| Location | |
 | |
The Senator George Sellar Bridge at Wenatchee, Washington was built in 1950 to carry U.S. Route 2 across the Columbia River. The steel suspended tied-arch bridge has a main span of 480 feet (150 m) with 224-foot (68 m) anchor arms. The suspended portion of roadway comprises 352 feet (107 m) and is 54 feet (16 m) wide, carrying four lanes with a median divider strip at a height of 180 feet (55 m) above mean water level. The 1950 bridge replaced a bridge built in 1908 at the same location. The new bridge was recognized by the American Institute of Steel Construction as the most beautiful bridge of 1950 for spans over 400 feet (120 m) in length.[3]
The bridge's engineer was R. W. Finke. The contractor was the General Construction Company of Seattle, using steel fabricated by the American Bridge Company. The bridge rests on two concrete piers in the river, with the central arch between them, and cantilever spans extending to concrete abutments high on the riverbanks.[3] Now named the Senator George Sellar Bridge after a Washington state senator, the bridge carries Washington State Route 285 since the construction of the Richard Odabashian Bridge for Route 2 farther north. An additional lane was added in 2009-2010.[4] The bridge was placed on the National Register of Historic Places on May 24, 1995.[2]
See also
References
- ^ "National Register of Historic Places Registration Form: Columbia River Bridge at Wenatchee" (PDF). National Park Service. Retrieved 2011-09-01.
- ^ a b "National Register Information System". National Register of Historic Places. National Park Service. July 9, 2010.
- ^ a b Krier, Robert H.; Barber, J. Byron; Bruce, Robert; Holstine, Craig (December 12, 1991). "National Register of Historic Places Registration Form: Columbia River Bridge at Wenatchee" (PDF). National Park Service. Retrieved 1 September 2011.
- ^ "George Sellar Bridge to Open for Pedestrians". Manson Village Tribune. September 22, 2009. Retrieved 1 September 2011.
| Topics | |
|---|---|
| Lists by state |
|
| Lists by insular areas | |
| Lists by associated state | |
| Other areas | |
| Related | |
 | This article about a property in Washington on the National Register of Historic Places is a stub. You can help Wikipedia by expanding it. |
 | This article about a bridge in the U.S. state of Washington is a stub. You can help Wikipedia by expanding it. |
- Road bridges on the National Register of Historic Places in Washington (state)
- Tied arch bridges
- Bridges completed in 1950
- Buildings and structures in Chelan County, Washington
- Buildings and structures in Douglas County, Washington
- Bridges over the Columbia River
- Road bridges in Washington (state)
- U.S. Route 2
- Bridges on the United States Numbered Highways
- National Register of Historic Places in Chelan County, Washington
- National Register of Historic Places in Douglas County, Washington
- Washington (state) Registered Historic Place stubs
- Western United States bridge (structure) stubs
- Washington (state) building and structure stubs
- Washington (state) transportation stubs