Jump to content

TDLR 7 and 8

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Morphenniel (talk | contribs) at 10:18, 4 October 2018 (Sources). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Tralee and Dingle Light Railway
7 and 8
File:4T engine failed, Adoon, Co. Leitrim (17254854862).jpg
former TDLR 4 (né 8) in April 1959 while on the Cavan and Leitrim Railway
Type and origin
Power typeSteam
BuilderKerr, Stuart and Company
Serial number800, 836
Build date1902, 1903
Specifications
Configuration:
 • Whyte2-6-0T
 • UIC1′C n2t
Gauge3 ft (914 mm)
Leading dia.2 ft 0 in (0.610 m)
Driver dia.3 ft 0 in (0.914 m)
Loco weight31 long tons 0 cwt (69,400 lb or 31.5 t)
Fuel typeCoal
Fuel capacity1 long ton 0 cwt (2,200 lb or 1 t)
Water cap.750 imp gal (3,400 L; 900 US gal)
Firebox:
 • Grate area7.5 sq ft (0.70 m2)
Boiler pressure140 lbf/in2 (0.97 MPa)
Heating surface:
 • Firebox47 sq ft (4.4 m2)
 • Tubes431 sq ft (40.0 m2)
CylindersTwo, outside
Cylinder size12.5 in × 20 in (318 mm × 508 mm)
Performance figures
Tractive effort10,330 lbf (45.95 kN)
Career
OperatorsTDLR » Great Southern Railways » CIÉ
ClassGSR/CIÉ 4T or KN1
Number in class2
Numbers7, 8 (renumbered 4 in 1908)
Withdrawn1928, 1959

Tralee and Dingle Light Railway 7 and 8 were two 2-6-0T locomotives manufactured by Kerr, Stuart and Company in 1902 and 1903 for the Tralee and Dingle Light Railway.

Around the turn of the 20th century the Tralee and Dingle Railway saw an increase in its traffic. On this railway cattle were far more important than passengers so the directors began looking for extra motive power. Taking into account that the line had only light trackwork, heavier locomotives were out of the question without changes to the wheel arrangement, although extra power could be made available with changes to the cylinders or boiler tubework to increase the heating surface and so the tractive effort.

These two locomotives, built by Kerr Stuart at their California Works, Stoke-on-Trent, provided the extra motive power and retained the 2-6-0T wheel arrangement. On the amalgamation in 1925 these locomotives passed to the Great Southern Railways as their Class 4T or Class KN1.

History

These two locomotives were delivered from the workshops of Kerr Stuart in 1902 and 1903. Like the Hunslet built locomotives (1 to 3, 6, and 8) these were fitted out to be suitable for tramway working with "skirts" covering the driving wheels and motion, cowcatchers, bell, headlight etc. The "skirts", normally a legal requirement for road-side tramways, were removed after only a short time to give crews easier access for lubrication of the motion etc. As photographic evidence does not show their return it must be presumed that the Board of Trade inspectors didn't get to this corner of Ireland very often.

They were delivered as Tralee & Dingle numbers 7 and 8, however No. 8 was re-numbered as No. 4 in 1908, following the scrapping in 1907 of the original, a Hunslet 0-4-2T, built in 1890 and withdrawn in 1902.

Orig. No. Re-No. Builders Works No. Date Scrapped Notes
7 7T Kerr Stuart 800 1902 1928
8* 4/4T Kerr Stuart 836 1903 1959 to Cavan and Leitrim Railway, 1941
  • Originally numbered No.8. Re-numbered No.4 in 1907 when the original No.4, an 0-4-2T (Hunslet 514-1890) was scrapped (withdrawn in 1902).

Livery

T&D locomotives were painted dark green lined out with red between two cream lines and with red buffer beams. After the 1925 amalgamation the locomotives were painted in the standard GSR plain grey, the buffer beam remaining red.

Model

The Kerr Stuart #4 is available as a Gauge 1 etched-brass kit from Studio Scale Models This kit includes a brass chassis, nickel silver underframe with brass and white-metal parts.

Sources

  • Clements, Jeremy & McMahon, Michael (2008). Locomotives of the GSR. Newtownards: Colourpoint Books. p. 226. ISBN 978-1-906578-26-8.
  • http://www.tdlr.org.uk