Jump to content

Talk:Beretta 8000

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

Clean up

[edit]

This was clearly a cut and paste job from some other site (looks suspiciously like [1]).

I'm going to clean it up and also redirect Beretta 8000 Cougar F Inox and Beretta 8000 Cougar D Inox pages here, which clearly are just different specs for th same firearms (variants). All the Beretta pages are a total mess, with hundreds of separate pages instead of one for each firearm!!!! Deon Steyn 10:39, 10 July 2006 (UTC)[reply]

Definitely a ripoff of the world.guns.ru site. Are you still planning to work on it? Lord Bodak 04:03, 11 December 2006 (UTC)[reply]

Locking system description way off?

[edit]

Unless the info I have that the Cougar and PX4 share the same locking system and implementaton is false, the description provided here of the locking system is way off. In fact, almost everything about it is wrong. The cam track is in the barrel extension, the tooth is in the transfer block, the recoil spring being in the transfer block's base has no effect whatsoever on the recoil imparted by the locking system, etc. I will have to run this down when I have more time. The pic is awful as well.--Solidpoint 09:38, 18 May 2007 (UTC)[reply]

Solidpoint.....you're correct about the internal workings on the barrel. I've updated the 8045 info to add the Cat Pak and LAPD models. Also the Stoegar info as well. www.berettaforum.net is a great source of info for these models as well. Lots of great pics in the handguns section there.

Thank you. Just checking in here again, and removed the assertion that bedding the recoil spring in the transfer block somehow reduces peak recoil forces on the transfer block or the frame. This is clearly rediculous. The transfer block is not buffered by the recoil spring whatsoever, and the gun would fail to function, and the transfer block or frame would have to be broken if it moved during recoil. In particular, the tooth in the transfer block must absolutely NOT move under recoil forces in order for it to perform it's primary function - to engage the cam cut in the barrel extension and unlock the barrel from the slide. --24.10.27.118 (talk) 10:28, 2 August 2010 (UTC)[reply]

8040 capacity is 11 rounds

[edit]

Perhaps its a later design revision from original release, but the 8040's caliber 40 S&W magazines in fact hold 11 rounds where legal to own have +10 magazines for semi-autos in the US.

www.shopberetta.com lists these as "high capacity" but I think this distinction is with regard to some states' persistent legal restrictions on magazines with more than 10 round capacities. Additional info from the Beretta International website on tech specs for the model/series (scroll down to 8040 listing in tables): www.beretta.com .

.41 AE Chambering.

[edit]

The .41 AE article mentions that the 8000 was chambered in .41 AE at one point. If that is the case, we might want to add it to the article. 66.191.19.217 (talk) 05:40, 28 December 2008 (UTC)[reply]

[edit]

Hello fellow Wikipedians,

I have just modified one external link on Beretta 8000. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 07:51, 31 October 2016 (UTC)[reply]