Jump to content

Talk:Filter press

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

What is filter plates

Removed para and ref from article

[edit]

The following paragraph I have removed from the article.

===Hot filter press===

The hot filter press combines the standard process steps of a membrane filter press, (filtration, filter cake washing and squeezing), with the additional function of a thermal filter cake drying (TCD). As a result, all process steps are carried out in one plant, the hot filter press. Dewatering and drying of the resulting filter cake is thus done without a downstream drying process. In the basic version, the technical design corresponds to a conventional filter press with a plate pack of membrane plates. Filtration, washing and pressing out are carried out as usual. In contrast to the conventional method, the system consists of membrane filter plates and heat exchanger plates, which are installed alternately in a filter press. For thermal drying, hot steam and/or oil is applied to the working space behind the membrane and the filter cake is thermally dried accordingly. The advantage of this process is that a high dry matter content (DM content) of over 90% is achieved.

The contributor has added it xwiki with (additions can be seen at m:User:COIBot/XWiki/mse-filterpressen.com) and when the ref was removed has readded and said that the para needs the reference. If it cannot be otherwise independently verified, then it probably needs to be removed. I am concerned about potential for conflict of interest especially with the apparent watching of the article though editing from an IP address. I think we need openness in this area. — billinghurst sDrewth 12:05, 21 April 2019 (UTC)[reply]

Efficient Sludge Treatment Equipment

[edit]

When it comes to sludge dewatering, investors often think of large, bulky equipment due to the substantial amount of wastewater that needs to be processed. However, with our screw press machines (máy ép bùn trục vít), our engineers have developed compact and sturdy equipment. Despite their small size, these machines have the capability to handle a significant volume of sludge according to the investors' needs.

With this convenience, investors can easily transport the machines and save a considerable amount of space in the wastewater treatment area. — Preceding unsigned comment added by Shaverdaily (talkcontribs) 06:30, 2 June 2023 (UTC)[reply]