Talk:Freedom Arms
This article is rated Start-class on Wikipedia's content assessment scale. It is of interest to the following WikiProjects: | ||||||||||||||||||||||||
|
Serial Number Info
[edit]Please provide any serial number info verified by FA here please.
D9567 454 7.5" - Shipped 06-17-1986
DF1306 454 4.75" - Shipped 09-30-1988
Minutiae
[edit]Early FA M83 pistols had a nut holding the mainspring in the frame. This was replaced in 199? by a slot in the frame that retains the mainspring.
In 199? FA introduced a bushing retained firing pin upgrade that makes firing pin replacement a simple task. The factory will upgrade older guns with the press-fit fp for a nominal charge.
Intermediate era (1992-199?) guns are often seen with a replaceable carbide forcing cone insert retained by a set screw on the right side of the frame.
The factory Premier finish is applied using a worn piece of brown ScotchBrite. Minor finish blemishes can be removed from Premier Grade guns by softening a piece of brown ScotchBrite and rubbing gently in the direction of the original finish. Field Grade guns are grit blasted and should not be touched-up with ScotchBright.
Older M83 guns that do not carry a Field Grade or Premier Grade designation are Premier Grade. All silhouette model pistols were Field Grade finished.
All M97 guns are Premier Grade.
- Start-Class United States articles
- Low-importance United States articles
- Start-Class United States articles of Low-importance
- Start-Class Wyoming articles
- Unknown-importance Wyoming articles
- WikiProject Wyoming articles
- WikiProject United States articles
- Start-Class Firearms articles
- Low-importance Firearms articles
- WikiProject Firearms articles